Reversible Sodium Metal Electrodes: Is Fluorine an Essential Interphasial Component?

Alkaline metals are an ideal negative electrode for rechargeable batteries. Forming a fluorine‐rich interphase by a fluorinated electrolyte is recognized as key to utilizing lithium metal electrodes, and the same strategy is being applied to sodium metal electrodes. However, their reversible plating/stripping reactions have yet to be achieved. Herein, we report a contrary concept of fluorine‐free electrolytes for sodium metal batteries. A sodium tetraphenylborate/monoglyme electrolyte enables reversible sodium plating/stripping at an average Coulombic efficiency of 99.85 % over 300 cycles. Importantly, the interphase is composed mainly of carbon, oxygen, and sodium elements with a negligible presence of fluorine, but it has both high stability and extremely low resistance. This work suggests a new direction for stabilizing sodium metal electrodes via fluorine‐free interphases.     

Mechanical and tribological properties of DLC coatings deposited by plasma-based ion implantation and deposition method on polyoxymethylene

Polyoxymethylene (POM, polyacetal) is one of the most popular plastics for machine elements, especially in Japan. However, it is difficult to use it under severe operating conditions such as high speed and high contact pressure. Diamond-like carbon (DLC) coatings were well known to be tribological and functional coatings. However, both POM and DLC coatings are difficult to adhere them each other. In the present paper, DLC coatings are deposited by plasma-based ion implantation and deposition (PBIID) method on POM substrate, and validity of DLC coatings on POM was investigated through friction and mechanical tests. When gas pressure was 0.2 and 0.8 Pa, hardness and adhesion properties of DLC coating deposited under gas pressure of 0.5 Pa were lower compared with under 0.2 and 0.8 Pa. For preparing DLC coatings having hard and good adhesion properties, relatively thin substrate was suitable. A correlation between relative humidity in the laboratory and friction coefficient was confirmed while DLC coatings remain on the substrate.     

From tetragermacyclobutene to tetragermacyclobutadiene dianion to tetragermacyclobutadiene transition metal complexes

The reaction of 3,4-dichlorotetragermetene derivative 2 with Na(2)[Fe(CO)(4)] in THF produced a (tetragermacyclobutadiene)tricarbonyliron complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]Fe(CO)(3)4, which has a slightly folded Ge(4) ring perhaptocoordinated to the Fe center. Structural and spectral characteristics of 4 show a remarkable π-donating ability of the tetragermacyclobutadiene ligand toward the transition metal, surpassing that of tetrasilacyclobutadiene and cyclobutadiene ligands. Reduction of 2 with KC(8) resulted in exclusive formation of the dipotassium salt of the tetragermacyclobutadiene dianion derivative 3(2-)·[K(+)(thf)(2)](2), representing a rare example of a 6π-electron compound that, on the basis of its structural and magnetic properties, was recognized as a nonaromatic species. Reaction of 3(2-)·[K(+)(thf)(2)](2) with CpCoI(2)(PPh(3)) produced a (cyclopentadienyl)(tetragermacyclobutadiene)cobalt complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]CoCp 7, as the first example of a sandwich compound featuring an all-germanium-containing cyclic polyene ligand.     

Structure of liquid-crystalline phases formed by N-acetyl-L-glutamic acid oligomeric benzyl esters –2H NMR study

A series of N-acetyl-L-glutamic acid oligopeptide benzyl esters with exact residue numbers 4, 6, and 12 has been synthesized by a stepwise procedure. For these oligopeptide–dioxane binary systems, the behavior of the liquid-crystalline phases has been examined␣by the use of ²H NMR, and the results indicate that highly ordered aggregates formed by these oligopeptides in dioxane are in an alignment similar to that in a nematic mesophase. Received: 27 February 2001 Accepted: 8 May 2001     

Resazurin as an electron acceptor in glucose oxidase-catalyzed oxidation of glucose

The behavior of resazurin (1) as an electron acceptor in glucose oxidase (GOD)-catalyzed oxidation of glucose under anaerobic conditions is described. When a mixture of 1, glucose, and GOD in phosphate buffer (pH 7.4, 0.1 M) was incubated at 25 degrees C, the resulting solution turned purple to fluorescent pink due to the deoxygenated product, resorufin (2). On incubation of 1 with GOD alone or with H2O2 under essentially the same conditions, no color change was seen, indicating that generation of 2 in the enzymatic reaction is brought about through reduction of 1 by the reduced form (GODred) of GOD, which was also supported by the voltammetric behavior of 1. However, it was found that the enzymatic transformation of 1 to 2 is of no practical use as an indicator reaction for glucose determination using only GOD due to a slow reaction of 1 with GODred. Based on a ping-pong type mechanism with a steady-state approximation, KM and kcat for 1 as an electron acceptor from GODred were estimated to be 15+/-1.3 microM and (5.0+/-0.5) x 10(-2) s(-1), respectively.     

Synthesis of Functionalized (η5‐Indenyl)rhodium(III) Complexes and Their Application to C−H Bond Functionalization

It has been established that reductive complexation of functionalized benzofulvenes, which are readily prepared from commercially available indene and 2‐methylindene, with RhCl₃ in ethanol affords the corresponding indenyl–rhodium(III) dichlorides bearing substituents at the 1‐ (H or CO₂Et), 2‐ (H or Me), and 3‐ [CH₂Ph or CH₂(2‐MeOC₆H₄)] positions. The indenyl–rhodium(III) complexes bearing one ethoxycarbonyl group showed higher thermal stability and regioselectivity than our previously reported Cp^ERh^III complex toward the oxidative [3+2] annulation of acetanilides with internal alkynes.     

Siladenoserinols M–P,sulfonated serinol derivatives from a tunicate

Four new sulfonated serinol derivatives, siladenoserinols M–P (1–4), were isolated from a tunicate of the family Didemnidae collected in Indonesia. Their chemical structures were elucidated by the interpretation of NMR and mass spectroscopic data. Two of them (2 and 4) were revealed to be disulfonate serinol derivatives, and the others were monosulfonates. Siladenoserinols A (5) and B (6), which we previously isolated from the same tunicate, inhibited the p53–Hdm2 interaction with an IC₅₀ value of 2.0?μM. However, 1–4 did not inhibit the activity. The result suggested that the acetyl group in the bicyclic ketal unit and/or the glycerophospholipid moiety in 5 and 6 were responsible for the inhibition of the p53–Hdm2 interaction.     

Single-step preparation of topological gels using vinyl-modified β-cyclodextrin as a figure-of-six cross-linker

Herein, we have proposed a single-step preparation of topological gels using vinyl-modified β-cyclodextrin (V-β-CyD) and isoprene. Copolymerization of V-β-CyD and isoprene in an aqueous solution resulted in gelation due to V-β-CyD acting as a novel type of copolymer chain cross-linker. The vinyl moiety of V-β-CyD becomes a part of the copolymer, while the β-CyD moiety of V-β-CyD simultaneously incorporates the isoprene component of the copolymer. V-β-CyD is capable of two different modes of cross-linking at each end, i.e., chemically bonding and mechanically interlocking. Due to the shape of the cross-linking point, we refer to it as figure-of-six cross-linking. Nuclear magnetic resonance analysis showed that the gel contained V-β-CyD and isoprene in an approximately 1:0.3 stoichiometry. The relatively high content of β-CyD was reflected in the character of the gel; the gel swelled in dimethylformamide which is a good solvent of β-CyD. A fluorometric analysis using 6-(p-toluidino)-2-naphthalenesulfonic acid showed that the appended β-CyD was able to accommodate guest molecules. Introduction of an additional vinyl monomer into the gel was also successful. Addition of 4-vinylphenylboronic acid to the preparation procedure yielded a sugar-responsive gel that swelled in the presence of d-fructose.     

Metallaphotoredox Difluoromethylation of Aryl Bromides

Herein, we report a convenient and broadly applicable strategy for the difluoromethylation of aryl bromides by metallaphotoredox catalysis. Bromodifluoromethane, a simple and commercially available alkyl halide, is harnessed as an effective source of difluoromethyl radical by silyl‐radical‐mediated halogen abstraction. The merger of this fluoroalkyl electrophile activation pathway with a dual nickel/photoredox catalytic platform enables the difluoromethylation of a diverse array of aryl and heteroaryl bromides under mild conditions. The utility of this procedure is showcased in the late‐stage functionalization of several drug analogues.     

Synthesis of (+)-altholactone, (+)-7-epi-altholactone, (−)-etharvensin,and (+)-alumheptolide-A using Pd-catalyzed carbonylation

Syntheses of (+)-altholactone isolated from Goniothalamus giganteus and its C-7 epimer (+)-7-epi-altholactone, (?)-etharvensin and (+)-alumheptolide-A were achieved. The lactone ring of these compounds was constructed using Pd-catalyzed carbonylation.