Chiral bicyclic imidazolium salts as a new class of N-heterocyclic carbene precursors

A N(1)-C(5) bridged chiral bicyclic imidazole with a morpholine framework was synthesized from an enantiopure 2-amino alcohol. The resultant imidazole reacted with various electrophiles, including primary and secondary alkyl halides, benzyne, and an electron-deficient aryl halide, to give the corresponding imidazolium salts. Some of the imidazolium salts were found to have potential as the precursor of a chiral N-heterocyclic carbene catalyst; by the direct annulation of an enal and a ketone through the intermediacy of a homoenolate and an activated carboxylate, the target lactone was obtained in an enantiomerically enriched form (up to 66% ee).     

Determination of orthophthalaldehyde in air using 2,4-dinitrophenylhydrazine-impregnated silica cartridge and high-performance liquid chromatography

A new method is described for the determination of orthophthalaldehyde in air which is used for the disinfection of various instruments (e.g. endoscopes) in hospital. Orthophthalaldehyde in air was collected with a silica gel cartridge impregnated with acidified 2,4-dinitrophenylhydrazine (DNPH-cartridge) and derivatives were analyzed by high-performance liquid chromatography (HPLC). In this study, the derivatization was examined by comparing the process with three phthalaldehyde isomers (ortho-, iso- and tere-). In the case of iso- and tere-phthalaldehyde, derivatives synthesized with excess of aldehyde consisted mainly of mono-derivatives, and derivatives synthesized with excess of DNPH consisted mainly of bis-derivative. In the case of orthophthalaldehyde, derivative consisted of only bis-derivative and mono-derivative was never observed under any conditions. Orthophthalaldehyde was completely retained by the DNPH-cartridge during air sampling, however, the derivatization reaction was incomplete and unreacted orthophthalaldehyde was flushed from the cartridge during the subsequent solvent extraction process. Unreacted orthophthalaldehyde and DNPH reacted again in the extraction solvent solution. Immediately after the solvent extraction, both mono- and bis-DNPhydrazone derivatives of orthophthalaldehyde were present in the solution. However, over time, the mono-derivative decreased and bis-derivative increased until only the bis-derivative was left allowing accurate determination of the orthophthalaldehyde concentration. The transformation of mono-derivative to bis-derivative was faster in polar aprotic solvents such as acetonitrile, dimethyl sulfoxide and ethyl acetate. Transformation was found to occur most quickly in acetonitrile solvent and was completed in 4 h in this case. It was possible to measure orthophthalaldehyde in air as bis-derivative using a DNPH impregnated silica cartridge and HPLC analysis.     

Reversible Sodium Metal Electrodes: Is Fluorine an Essential Interphasial Component?

Alkaline metals are an ideal negative electrode for rechargeable batteries. Forming a fluorine‐rich interphase by a fluorinated electrolyte is recognized as key to utilizing lithium metal electrodes, and the same strategy is being applied to sodium metal electrodes. However, their reversible plating/stripping reactions have yet to be achieved. Herein, we report a contrary concept of fluorine‐free electrolytes for sodium metal batteries. A sodium tetraphenylborate/monoglyme electrolyte enables reversible sodium plating/stripping at an average Coulombic efficiency of 99.85 % over 300 cycles. Importantly, the interphase is composed mainly of carbon, oxygen, and sodium elements with a negligible presence of fluorine, but it has both high stability and extremely low resistance. This work suggests a new direction for stabilizing sodium metal electrodes via fluorine‐free interphases.     

Application of partial-filling capillary electrophoresis using lectins and glycosidases for the characterization of oligosaccharides in a therapeutic antibody

Oligosaccharides in therapeutic recombinant antibodies play important roles in regulation of various biological functions. To monitor the glycosylation profiles of antibody pharmaceuticals in the manufacturing process, a highly sensitive and specific method is required. We extended partial-filling techniques using lectins and exoglycosidases in capillary electrophoresis for the characterization of 8-aminopylene-1,3,6-trisulfonic acid labeled N-linked oligosaccharides derived from the therapeutic antibody rituximab. In the lectin-filling method, Galb1–4GlcNAc-specific Erythrina cristagali agglutinin, a1, 6-linked Fuc-specific Aleuria aurantia lectin and Neu5Aca2–3Gal-specific Maackia amurensis lectin were used. The oligosaccharides migrated through the lectin plug during separation; the changes in separation profiles were observed according to the interaction with the lectins. The glycosidase-filling method allowed rapid digestion as suggested by the electropherograms. Partial-filling CE methods can avoid tedious hands-on procedures such as overnight incubation and optimization reaction condition with lectins and exoglycosidases. Combination of these partial-filling capillary electrophoresis methods makes the characterization of oligosaccharide profiles of therapeutic antibodies easier and faster.     

Evaluation of image sticking property on liquid crystal displays with polymer layers produced from phenanthrene-carrying monomers

As a model of polymer-sustained-alignment liquid crystal display (PSA-LCD), the liquid crystal (LC) cells having the polymer layers produced from monomers of phenanthrene (Phen)-carrying monomers, 2,7-, 3,8-, 1,8- and 3,6-dimethacryloyl-oxy-phenanthrene (DMAPhen), were prepared and investigated image sticking phenomenon with evaluations of residual direct current voltage (V_rDC) and difference in pretilt angle before and after application of alternate current voltage (Δtilt). The V_rDC values were small for the LC cells with the polymer layers produced from the Phen-carrying monomers used in this study. On the other hand, Δtilt depends on the molecular structure of the Phen-carrying monomer. The Δtilt values became small with increasing the linearity of the monomer structure for the Phen-carrying monomers. The findings would be useful for obtaining the small level of image sticking in the PSA-LCDs produced from the Phen-carrying monomers.     

Five‐State Molecular Shuttling of a Pair of [2]Rotaxanes: Distinct Outputs in Response to Acid and Base Stimuli

In this study we synthesized two acid‐/base‐controllable [2]rotaxanes featuring aminodiazobenzene and aminocoumarin units, respectively, as chromophores and dibenzo[24]crown‐8 and dibenzo[25]crown‐8 units, respectively, as their macrocyclic components. Each [2]rotaxane contained N‐alkylarylamine (ammonium) and N,N‐dialkylamine (ammonium) centers as binding sites for their crown ether components. The absorption patterns of the chromophores were dependent on the position of the encircling macrocyclic component and the degree of protonation, with three distinct states (under acidic, neutral, and basic conditions) evident for each [2]rotaxane. The mixed [2]rotaxane system displayed stepwise and independent molecular shuttling behavior based on the degree of protonation of the amino groups in response to both the amount and strength of added acids or bases; as such, the system provided five different absorption signals as outputs that could be read using UV/Vis spectroscopy.     

Electronic Transitions in Conformationally Controlled Peralkylated Hexasilanes

The photophysical properties of oligosilanes show unique conformational dependence due to σ‐electron delocalization. The excited states of the SAS, AAS, and AEA conformations of peralkylated n‐hexasilanes, in which the SiSiSiSi dihedral angles are controlled into a syn (S), anti (A), or eclipsed (E) conformation, were investigated by using UV absorption, magnetic circular dichroism (MCD), and linear dichroism spectroscopy. Simultaneous Gaussian fitting of all three spectra identified a minimal set of transitions and the wavenumbers, oscillator strengths, and MCD B terms in all three compounds. The results compare well with those obtained by using the symmetry‐adapted‐cluster configuration interaction method and almost as well with those obtained by time‐dependent density functional theory with the PBE0 functional. The conformational dependence of the transition energies and other properties of free‐chain permethylated n‐hexasilane, n‐Si₆Me₁₄, was also examined as a function of dihedral angles, and the striking effects found were attributed to avoided crossings between configurations of σσ* and σπ* character.     

Synthesis and properties of polyfluoro(silyl)acetylene nanoparticles by reaction of fluoro(silyl)acetylenes with triethylamine

Fluoro(silyl)acetylenes, which were prepared by reaction of 1,1-difluoroethylene with silyl chlorides, reacted with triethylamine to give dark-brown colored polyfluoro(silyl)acetylene powders in excellent to moderate isolated yields. In contrast, the corresponding nonfluorinated acetylene was unable to react with triethylamine at all to afford poly(silyl)acetylene under similar conditions. Polyfluoro(silyl)acetylenes thus obtained were nanometer size-controlled cubic fine particles with a good dispersibility and stability in a variety of solvents. These polyfluoro(silyl)acetylene nanoparticles exhibited clear absorption and emission spectra related to the conjugated units in polymer main chain. Furthermore, these polyfluoro(silyl)acetylene nanoparticles were applied to the surface modification of poly(methyl methacrylate) [PMMA] film to exhibit a higher oleophobicity imparted by fluorine on their surface, compared to that on the reverse side.

Characterization of posticlure and the structure-related sex pheromone candidates prepared by epoxidation of (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes

trans-11,12-Epoxy-(6Z,9Z)-6,9-henicosadiene (posticlure) has been identified from a pheromone gland of the lymantriid species, Orgyia postica. Since the diversity of Lepidoptera suggests that some species utilize the structure-related epoxy compound as a sex pheromone component, epoxydienes and epoxytrienes derived from (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes with a C₁₉–C₂₁ chain were systematically synthesized and the chemical data were accumulated in order to contribute to a new pheromone research. Peracid oxidation of each triene and each tetraene produced, respectively, a mixture of three epoxydienes (cis-6,7-epoxy-9,11-diene; cis-9,10-epoxy-6,11-diene; and trans-11,12-epoxy-6,9-diene) and four epoxytrienes (cis-3,4-epoxy-6,9,11-triene; cis-6,7-epoxy-3,9,11-triene; cis-9,10-epoxy-3,6,11-triene; and trans-11,12-epoxy-3,6,9-triene). While the 9,10-epoxy compounds were unstable and, interestingly, converted into 9-ketone derivatives after chromatography over SiO₂, each positional isomer was isolated by HPLC equipped with an ODS column, and the chemical structure was determined by NMR analysis. On the GC-MS analysis with a DB-23 column, the positional isomers were also eluted separately and characteristic mass spectra were proposed. By comparing the spectral data of the epoxy compounds with a different carbon chain, diagnostic fragment ions reflecting the chemical structure were determined as follows: m/z 79, 109, 113, and M-114 for the 6,7-epoxydienes; m/z 69, 97, 111, 139, and M-111 for the 9,10-epoxydienes; m/z 57, 79, 109, 136, M-151, and M-111 for the 11,12-epoxydienes; m/z 79, 91, 105, and 119 for the 3,4-epoxytrienes; m/z 79, 124, M-124, M-96, and M-69 for the 6,7-epoxytrienes; m/z 79, 95, 109, 137, and M-108 for the 9,10-epoxytrienes; and m/z 79, 134, M-149, M-109, and M-95 for the 11,12-epoxytrienes.     

Syntheses and Properties of Graphyne Fragments: Trigonally Expanded Dehydrobenzo[12]annulenes

We present herein the synthesis and properties of the largest hitherto unknown graphyne fragment, namely trigonally expanded tetrakis(dehydrobenzo[12]annulene)s (tetrakis‐DBAs). Intramolecular three‐fold alkyne metathesis reactions of hexakis(arylethynyl)DBAs 9 a and 9 b using Fürstner’s Mo catalyst furnished tetrakis‐DBAs 8 a and 8 b substituted with tert‐butyl or branched alkyl ester groups in moderate and fair yields, respectively, demonstrating that the metathesis reaction of this protocol is a powerful tool for the construction of graphyne fragment backbones. For comparison, hexakis(arylethynyl)DBAs 9 c – g have also been prepared. The one‐photon absorption spectrum of tetrakis‐DBA 8 a bearing tert‐butyl groups revealed a remarkable bathochromic shift of the absorption cut‐off (λ_cutoff) compared with those of previously reported graphyne fragments due to extended π‐conjugation. Moreover, in the two‐photon absorption spectrum, 8 a showed a large cross‐section for a pure hydrocarbon because of the planar para‐phenylene‐ethynylene conjugation pathways. Hexakis(arylethynyl)‐DBAs 9 c – e and 9 g and tetrakis‐DBA 8 b bearing electron‐withdrawing groups aggregated in chloroform solutions. Comparison between the free energies of 9 e and 8 b bearing the same substituents revealed the more favorable association of the latter due to stronger π–π interactions between the extended π‐cores. Polarized optical microscopy observations, DSC, and XRD measurements showed that 8 b and 9 e with branched alkyl ester groups displayed columnar rectangular mesophases. By the time‐resolved microwave conductivity method, the columnar rectangular phase of 8 b was shown to exhibit a moderate charge‐carrier mobility of 0.12 cm² V^?1 s^?1. These results indicate that large graphyne fragments can serve as good organic semiconductors.