Continuous-flow microextraction and gas chromatographic-mass spectrometric determination of polycyclic aromatic hydrocarbon compounds in water

A new method of the determination polycyclic aromatic hydrocarbons (PAHs) in water samples was developed by continuous-flow microextraction (CFME) coupled with gas chromatography-mass spectrometry (GC-MS). In this experiment, 15 mL sample solution with no salt-added was flowed at the rate of 1.0 mL min⁻¹ through 3 μL benzene as extraction solvent. Under the optimal extraction conditions, the developed method was found to yield a linear calibration curve in the concentration range from 0.05 to 15 ng mL⁻¹. Furthermore, the accuracy and repeatability of the method were good by calculating from water samples spiked at known concentrations of PAHs, and the recovery of optimal method was satisfactory. The results showed that CFME was an efficient preconcentration method for extraction of PAHs from spiked water samples.     

Concise syntheses of cystothiazoles A, C, D, and melithiazol B

A convergent synthesis of cystothiazoles C 1 and D 3 was achieved based on Julia coupling between the functionalized aldehyde 5b, corresponding to left half of the final molecule, and aryl sulfone 6 or 7, bearing a bithiazole moiety, corresponding to right half. Methylation of 1 and 3 gave cystothiazole A 2 and melithiazol B 4, respectively. The overall yield (5 steps from (2R,3S)-3-methylpent-4-yne-1,2-diol 10; 57%) of 5b via the present route was improved in comparison to that of the previously reported functionalized aldehyde 5a (7 steps from 10; 13%). By applying the modified Julia coupling method, selectivity (6E/6Z=20 : 1-26 : 1) toward the (6E)-form of the coupled products (15 or 19) against the corresponding (6Z)-form was improved in comparison to the Wittig method (6E/6Z=4 : 1-6.9 : 1).     

Semi-synthesis of polymyxin B (2-10) and colistin (2-10) analogs employing the Trichloroethoxycarbonyl (Troc) group for side chain protection of alpha,gamma-diaminobutyric acid residues

Improved strategies for the chemical conversion of natural polymyxin B and colistin to their N-terminal analogs are reported. First, the protection of the side chains of five L-alpha,gamma-diaminobutyric acid (Dab) residues in natural polymyxin B and colistin was achieved with trichloroethoxycarbonyl (Troc), then the resulting pentakis(N gamma-Troc)-polymyxin B and pentakis(N gamma)Troc)-colistin were treated with trifluoroacetic acid (TFA) : methanesulfonic acid (MSA) : dimethylformamide (DMF) : H2O (10 : 30 : 55 : 5) at 40 degrees C in order to remove N alpha-alkanoyl-Dab(Troc)-OH selectively. The new key compounds, tetrakis(N gamma-Troc)-polymyxin B (2-10) and tetrakis(N gamma-Troc)-colistin (2-10), were obtained in 19% and 15% yields, respectively, which is higher than previous reports using trifluoroacetyl (Tfa) for tetrakis(N gamma-Tfa)-polymyxin B (2-10) and tetrakis(N gamma-Tfa)-colistin (2-10), respectively. Acylation of tetrakis(N gamma-Troc)-polymyxin B (2-10) and tetrakis(N gamma-Troc)-colistin (2-10) with various hydrophobic acids bearing aliphatic or aromatic ring structures, followed by the deprotection of Troc by Zn in AcOH, produced polymyxin B (2-10) and colistin (2-10) analogs which were used for structure-activity relationship studies. It was found that cyclohexylbutanoyl-, 4-biphenylacetyl-, and 1-adamantaneacetyl-polymyxin B (2-10) showed potent antimicrobial activity equal to that of polymyxin B against three Gram-negative bacterial strains. The lipopolysacharide (LPS) binding activity of cyclohexylbutanoyl-, 4-biphenylacetyl-, and cyclododecanecarbonyl-polymyxin B (2-10) increased greatly in comparison with that of polymyxin B (2-10). The various N alpha-acylated polymyxin B (2-10) analogs showed slightly higher antimicrobial and LPS binding activities than the corresponding N alpha-acylated colistin (2-10) analogs.     

Solid-phase extraction with C30 bonded silica for analysis of polycyclic aromatic hydrocarbons in airborne particulate matters by gas chromatography-mass spectrometry

A solid-phase extraction (SPE) method using triacontyl bonded silica (C30) as sorbent was developed for the determination of 16 US Environmental Protection Agency polycyclic aromatic hydrocarbons (PAHs) in airborne particulate matters quantitatively by gas chromatography-mass spectrometry (GC-MS). Optimization experiments were conducted using spiked standard aqueous solution of PAHs and real airborne particulates samples aiming to obtain highest SPE recoveries and extraction efficiency. Factors were studied in SPE procedures including the concentration of organic modifier, flow rate of sample loading and elution solvents. The ultrasonication time and solvents were also investigated. Recoveries were in the range of 68-107% for standard PAHs aqueous solution and 61-116% for real spiked sample. Limits of detection (LODs) and limits of quantification (LOQs) with standard solution were in the range of 0.0070-0.21 microgL(-1) and 0.022-0.67 microgL(-1), respectively. The optimized method was successfully applied to the determination of 16 PAHs in real airborne particulate matters.     

Liquid-crystalline physical gels

Liquid-crystalline (LC) physical gels are a new class of dynamically functional materials consisting of liquid crystals and fibrous aggregates of molecules that are called "gelators". Liquid-crystalline physical gels, which are macroscopically soft solids, exhibit induced or enhanced electro-optical, photochemical, electronic properties due to the combination of two components that form phase-separated structures. In this tutorial review, we describe the materials design and structure-property relationships of the LC physical gels. The introduction of self-assembled fibers into nematic liquid crystals leads to faster responses in twisted nematic (TN) mode and high contrast switching in light scattering mode. Furthermore, the LC physical gels can be exploited as a new type of materials for electro-optical memory. This function is achieved by the control of reversible aggregation processes of gelators under electric fields in nematic liquid crystals. Electronic properties such as hole mobilities are improved by the introduction of fibrous aggregates into triphenylene-based columnar liquid crystals. The incorporation of photochromic azobenzenes or electroactive tetrathiafulvalenes into the chemical structures of gelators leads to the preparation of ordered functional materials.     

Optically transparent conductive network formation induced by solvent evaporation from tin-oxide-nanoparticle suspensions

This investigation describes an optically transparent antistatic film composed of antimony-doped tin oxide (ATO) nanoparticles dispersed in a polymer matrix, with remarkably improved electrical and optical properties. The film is fabricated on the basis of a synergistic interaction between self-assembling nanoparticles and self-organizing matrix materials. The antistatic property of the film is obtained at ATO concentrations above a threshold value. A scaling analysis of the data yields an extremely low critical concentration (0.0020 volume fraction), which is considerably lower than the value predicted by percolation theory. Microscopic observations of the film have revealed a characteristic microstructure: "single-stranded" chainlike (linear form or fibrous) aggregates consisting of ATO nanoparticles and large ATO-depleted areas. The experiment results suggest that the high optical transparency and the low critical concentration are derived from the characteristic microstructures of the film.     

Asymmetric thio-Michael/nucleophilic addition domino reaction with chiral N-sulfinimines

Optically active N-sulfinimines underwent stereoselective Michael/nucleophilic addition domino reaction triggered by magnesium thiolate to give alpha-phenylthiomethyl-beta-(N-sulfinylamino) esters in high diastereomeric excess. The adducts were readily converted into optically active alpha-methylene-beta-(N-sulfinylamino)esters so that this reaction provides a useful asymmetric aza-Baylis-Hillman-equivalent method.     

The onset of penetrative double-diffusive convection

The onset of double-diffusive convection in a horizontal fluid layer is studied. The density is assumed to depend quadratically on the temperature and linearly on the solute concentration. Under the Boussinesq approximation, the linear stability of the conduction state is investigated with respect to the oscillatory and steady convection modes. For steady onset, the critical thermal Rayleigh number is found to be a double-valued function of the solutal Rayleigh number as long as the relative maximum of the density profile exists within the fluid layer. Driving mechanisms of the steady convections are discussed.     

Imperfection sensitivity of ultimate buckling strength of elastic-plastic square plates under compression

The mechanism of imperfection sensitivity of elastic-plastic plates under compression is complex as they undergo elastic and/or plastic buckling, dependent on their width-thickness ratio. For elastic buckling, the Koiter power law is an established means to describe the imperfection sensitivity. Yet, for plastic buckling, there is no such an established way to describe it. In this paper, the quadratic power law is advanced to describe imperfection-insensitive plastic buckling behavior. The Koiter power law is extended by implementing the quadratic law so as to describe the elastic and plastic buckling in a synthetic manner. The finite-displacement, elastic-plastic analysis was conducted on simply-supported square plates under compression by varying the plate thickness and the initial deflection of a sinusoidal form. In association with an increase of the plate slenderness parameter (decrease of plate thickness), the predominant buckling is shown to change from (1) plastic buckling to (2) unstable elastic-plastic buckling and to (3) elastic stable bifurcation followed by a maximum point of load. In accordance with the change of the mechanism of buckling, the power law is changed pertinently to describe the complex imperfection sensitivity of the compression plates in a synthetic manner. The extended imperfection sensitivity law is thus advanced as a simple and strong tool to describe the ultimate buckling strength of elastic-plastic plates.     

Influence of Charging Current and Potential Drop on the Propagation of the Change in the Membrane Potential

Propagation of a change in a potential difference between two aqueous phases (W1 and W2) across a membrane was examined by using three membrane cells (A, B and C). At first, the cell A was electrically connected with the cell B by controlling the ionic compositions. By changing the connection with the cell A from the cell B to the cell C indicating the different membrane potential, the change of the membrane potential was propagated. The delay and decrement of the propagation was observed by setting capacitors or resistors in the electric circuit.