Synthesis of Telechelic Polystyrene by Radical Polymerization Using 1,4-Bis(p-tert-Butylphenylseleno-Methyl)benzene as a Photoiniferter

Abstract

1,4-Bis(p-tert-butylphenylselenomethyl) benzene was synthesized, and used as a bifunctional photoiniferter for the polymerization of styrene. Both the polymer yields and the number average of molecular weights (_n) of polymers increased with the polymerization. The polymerization of styrene by this iniferter permitted telechelic polystyrene containing arylseleno groups at both chain ends, and the degree of functionality was 1.9. The seleno groups of both chain ends of polystyrene were reduced quantitatively by tri-n-butyltin hydride. These seleno groups in polystyrene were also eliminated by treatment with hydrogen peroxide to give telechelic polystyrene with carbon-carbon double bond at both chain ends. Further, polystyrene with double bonds was converted to telechelic polystyrene carrying terminal functional groups as epoxy, hydroxy, and iodide group, respectively.

     

Polymerization of Acrylamide in Aqueous Solution of Poly(N‐isopropylacrylamide) at Lower Critical Solution Temperature

Acrylamide (AAm) was found to polymerize in a solution of poly(N‐isopropylacrylamide) (PNIPAAm) in water at around its lower critical solution temperature (LCST) (32°C) without any initiators. This phenomenon was specifically observed in aqueous solutions of the polymers having LCST such as PNIPAAm and poly(methylvinylether) (PMVE). AAm polymerized only when PNIPAAm and AAm were dissolved in water below LCST of PNIPAAm and then the solution was warmed up to the polymerization temperature (40°C). On the other hand, the polymerization of AAm did not proceed when AAm was added into aqueous PNIPAAm solution during and after the phase separation above 32°C. Furthermore the polymerizability of AAm was remarkably affected by the concentration and molecular weight of the PNIPAAm additives. Under the condition of lower PNIPAAm concentration (0.30 mol/L), the increase in the molecular weight of PNIPAAm considerably increased the molecular weight of the resulting PAAm but decreased the yield of PAAm. Under the condition of higher PNIPAAm concentration (0.60 mol/L) the polymerizability was not so affected by the molecular weight of PNIPAAm, while the molecular weight of PAAm formed by using higher molecular weight PNIPAAm was higher than those of PAAm formed by using lower molecular weight PNIPAAm. Moreover, the molecular weight of PAAm formed by the PNIPAAm induced polymerization of AAm was much higher than that of the polymer obtained by the radical polymerization using AIBN in THF or VA‐ 061 in water.     

Liquid crystalline polyurethane. Polyurethanes containing bis-(p-oxymethylphenyl) terephthalate

Several polyurethanes based on bis-(p-oxymethylphenyl) terephthalate (BOPT) were synthesized and studied with respect to some of their thermal properties. BOPT exhibits a mesomorphic phase at 252–264°C. Polymerization was carried out by equimolar reaction with hexamethyl-ene diisocyanate (HDI), 4,4-dicyclohexylmethane diisocyanate (H₁₂MDI) α,α'-diisocyanate-1,3-dimethylcyclohexane (H6 XDI), 4,4′-diphenylmeth-ane diisocyanate (MDI), 2,4-tolylene diisocyanate (TDI), and phenylene diisocyanate (PDI). It became clear that polyurethanes obtained from BOPT with HDI, H₁₂MDI, H₆XDI, and TDI have mesomorphic phases at 243–291, 214–250, 172–229, and 180–234°C, respectively, as determined by DSC and polarized microscopy, and that all polyurethanes are crystalline as evidenced by x-ray diffraction.     

Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Characterization of posticlure and the structure-related sex pheromone candidates prepared by epoxidation of (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes

trans-11,12-Epoxy-(6Z,9Z)-6,9-henicosadiene (posticlure) has been identified from a pheromone gland of the lymantriid species, Orgyia postica. Since the diversity of Lepidoptera suggests that some species utilize the structure-related epoxy compound as a sex pheromone component, epoxydienes and epoxytrienes derived from (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes with a C₁₉–C₂₁ chain were systematically synthesized and the chemical data were accumulated in order to contribute to a new pheromone research. Peracid oxidation of each triene and each tetraene produced, respectively, a mixture of three epoxydienes (cis-6,7-epoxy-9,11-diene; cis-9,10-epoxy-6,11-diene; and trans-11,12-epoxy-6,9-diene) and four epoxytrienes (cis-3,4-epoxy-6,9,11-triene; cis-6,7-epoxy-3,9,11-triene; cis-9,10-epoxy-3,6,11-triene; and trans-11,12-epoxy-3,6,9-triene). While the 9,10-epoxy compounds were unstable and, interestingly, converted into 9-ketone derivatives after chromatography over SiO₂, each positional isomer was isolated by HPLC equipped with an ODS column, and the chemical structure was determined by NMR analysis. On the GC-MS analysis with a DB-23 column, the positional isomers were also eluted separately and characteristic mass spectra were proposed. By comparing the spectral data of the epoxy compounds with a different carbon chain, diagnostic fragment ions reflecting the chemical structure were determined as follows: m/z 79, 109, 113, and M-114 for the 6,7-epoxydienes; m/z 69, 97, 111, 139, and M-111 for the 9,10-epoxydienes; m/z 57, 79, 109, 136, M-151, and M-111 for the 11,12-epoxydienes; m/z 79, 91, 105, and 119 for the 3,4-epoxytrienes; m/z 79, 124, M-124, M-96, and M-69 for the 6,7-epoxytrienes; m/z 79, 95, 109, 137, and M-108 for the 9,10-epoxytrienes; and m/z 79, 134, M-149, M-109, and M-95 for the 11,12-epoxytrienes.     

Decreased l-tryptophan concentration in distinctive brain regions of mice treated repeatedly with phencyclidine

It has been reported that repeated phencyclidine (PCP) treatment induces schizophrenia-like behavior in mice. l-Tryptophan (Trp) concentrations in brain tissues of control (n?=?8) and PCP-treated mice (10 mg/kg/day, s.c., 14 days, n?=?10) were determined using high-performance liquid chromatography (HPLC) with fluorescence detection. The HPLC method involved pre-column fluorescence derivatization with (R)-(?)-4-(N,N-dimethylaminosulfonyl)-7-(3-isothiocyanatopyrrolidin-1-yl)-2,1,3-benzoxadiazole (DBD-PyNCS). Eight different parts of the brain, namely, the frontal cortex, nucleus accumbens, striatum, hippocampus, amygdala, thalamus, hypothalamus, and cerebellum, of both groups were investigated. A significant decrease in the l-Trp concentration in the nucleus accumbens (p?=?0.024) and hippocampus (p?=?0.027) was observed in PCP-treated mice, suggesting that alteration of the l-Trp metabolism might occur in these brain parts.     

Microwave-Accelerated Selective Acylation of (Hydroxyalkyl)phenols Using Acid Chlorides

Highly selective acylation of the alcoholic hydroxy group can be achieved with (hydroxyalkyl)phenols carrying both alcoholic and phenolic hydroxyls by the use of the most common acylating agents, acid chlorides, under microwave irradiation.     

Time Courses and Time‐Resolved Spectra of Firefly Bioluminescence Initiated by Two Methods of ATP Injection and Photolysis of Caged ATP

The time‐dependent characteristics of firefly bioluminescence initiated by manual injection of adenosine triphosphate (ATP) into buffer solution containing luciferin (Ln), luciferase (Luc) and Mg²⁺ were measured with a resolution of 10 ms, and compared with those obtained by photolysis of caged ATP. The time course depends on pH; both rise and decay rates decrease when pH is lowered from 7.8 to 6.8. In contrast, the parameter λ in the kinetic formula related to diffusion of ATP is almost independent of pH. The pH dependence of the time course of bioluminescence can be explained by the same pH tendency as the rate of ATP binding at the active site of Luc. The time‐resolved spectra can be decomposed into two Gaussian components with maxima at 2.2 and 2.0 eV. At pH 7.8, the band at 2.2 eV is more intense than that at 2.0 eV for all three concentration conditions. At lower pH, the band at 2.2 eV becomes weaker than that at 2.0 eV. The intensity ratio of the 2.0 and 2.2 eV bands is constant for duration time of 600 s for both injection and photolysis experiments, and the above conclusions are unaffected by the concentration ratio [Ln]/[Luc].     

Mechanistic study of asymmetric Michael addition of malonates to enones catalyzed by a primary amino acid lithium salt

A mechanistic study was carried out for the asymmetric Michael addition reaction of malonates to enones catalyzed by a primary amino acid lithium salt to elucidate the origin of the asymmetric induction. A primary β-amino acid salt catalyst, O-TBDPS β-homoserine lithium salt, exhibited much higher enantioselectivity than that achieved with the corresponding catalysts derived from α- and γ-amino acids for this reaction. Detailed studies of the transition states with DFT calculations revealed that the lithium cation and carboxylate group of the β-amino acid salt catalyst have important roles in achieving high enantioselectivity in the Michael addition reaction of malonates to enones.