Cobalt-catalyzed regioselective [3+2] annulation of ortho-formyl and acetyl substituted phenylboronic acids with alkynes

Treatment of alkynes with ortho-formyl and acetyl phenylboronic acids in the presence of a cobalt catalyst resulted in the formation of 2,3-disubstituted indenols in good yields. When aryl silyl alkynes were used, 2-aryl-3-silyl indenols were obtained regioselectively in good yields.     

Morphological change of crystalline polymer films by annealing: substrate‐ and heating/cooling‐rate‐dependent surface roughness

We study the morphological change of crystalline polymer films by annealing using atomic force microscope, X‐ray diffraction, and Fourier transform infrared spectroscopy techniques. As typical samples, we employ high‐density and low‐density polyethylene films prepared by the cast method. After annealing at 135 °C for 4 h, the surface roughness of polyethylene films by the atomic force microscope significantly increases, and the crystallite size by the X‐ray diffraction also shows some increase, while the Fourier transform infrared spectroscopy spectrum hardly exhibits any change. This can be well explained as a result of the growth of crystal structure by recrystallization during annealing. More interestingly, we find that the choice of the substrate and also the heating/cooling rates for annealing significantly influences the surface roughness of the films. Copyright © 2017 John Wiley & Sons, Ltd.     

Hydrogen bond network-stabilisation of blue phases by addition of a chiral N-(10-hydroxydecyl)succinimide derivative and alkane diols

Blue phases (BPs) obtained by doping a commercially available liquid crystalline compound (4-butyl-N-(4-ethoxybenzylidene)aniline (EBBA)) with (2R,3R)-2,3-bis(4-octyloxyphenylbenzoyloxy)-N-(hydroxydecyl)succinimide (1) were highly stabilised by the addition of a small amount of alkane diols. Especially, addition of only 0.5 mol% of octane-1,8-diol increased the BP–Iso transition temperature by 10 K and widened the BP temperature range up to 35 K. A model stabilisation mechanism based on the construction of a hydrogen bond network in each disclination zone in BPs was proposed.     

Ionic liquid salt bridge based on tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide for stable liquid junction potentials in highly diluted aqueous electrolyte solutions

A moderately hydrophobic ionic liquid, tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide ([TBMOEP⁺][C₂C₂N⁻]), shows a very stable liquid junction potential upon contact with an aqueous solution whose ionic strength is as low as 1 μmol dm⁻³. The stability with the maximum excursion of the potential within ±0.5 mV for 30 min is very promising for accurate determination of pH and other single ion activities potentiometrically.     

Generation and development of RNA ligase ribozymes with modular architecture through "design and selection"

In vitro selection with long random RNA libraries has been used as a powerful method to generate novel functional RNAs, although it often requires laborious structural analysis of isolated RNA molecules. Rational RNA design is an attractive alternative to avoid this laborious step, but rational design of catalytic modules is still a challenging task. A hybrid strategy of in vitro selection and rational design has been proposed. With this strategy termed "design and selection," new ribozymes can be generated through installation of catalytic modules onto RNA scaffolds with defined 3D structures. This approach, the concept of which was inspired by the modular architecture of naturally occurring ribozymes, allows prediction of the overall architectures of the resulting ribozymes, and the structural modularity of the resulting ribozymes allows modification of their structures and functions. In this review, we summarize the design, generation, properties, and engineering of four classes of ligase ribozyme generated by design and selection.     

Test compounds for detecting the silanol effect on the elution of ionized amines in reversed‐phase LC

The effectiveness of several basic compounds for testing silica‐based stationary phases was reviewed by applying them to recent columns for reversed‐phase HPLC. Most octadecylsilylated (C18) stationary phases, prepared as a base‐deactivated material from high‐purity silica gel with endcapping, provided excellent peak shape and column efficiency for the bases including benzylamine and amitriptyline that once caused problems and were subsequently employed for testing silanol activities. However, a cyclic tertiary amine, dextrometorphan, was eluted as an acceptable peak from only a few columns at neutral pH. Such a more sensitive probe is expected to contribute to further improvement of the stationary phase for reversed‐phase HPLC.     

Mechanism of the decrease in catalytic activity of human cytochrome P450 2C9 polymorphic variants investigated by computational analysis

Cytochrome P450 (CYP) is deeply involved in the metabolism of chemicals including pharmaceuticals. Therefore, polymorphisms of this enzyme have been widely studied to avoid unfavorable side effects of drugs in chemotherapy. In this work, we performed computational analysis of the mechanism of the decrease in enzymatic activity for three typical polymorphisms in CYP 2C9 species: *2, *3, and *5. Based on the equilibrated structure obtained by molecular dynamics simulation, the volume of the binding pocket and the fluctuation of amino residues responsible for substrate holding were compared between the wild type and the three variants. Further docking simulation was carried out to evaluate the appropriateness of the binding pocket to accommodate substrate chemicals. Every polymorphic variant was suggested to be inferior to the wild type in enzymatic ability from the structural viewpoint. F‐G helices were obviously displaced outward in CYP2C9*2. Expansion of the binding pocket, especially the space near F′ helix, was remarkable in CYP2C9*3. Disappearance of the hydrogen bond between K helix and β4 loop was observed in CYP2C9*5. The reduction of catalytic activity of those variants can be explained from the deformation of the binding pocket and the consequent change in binding mode of substrate chemicals. The computational approach is effective for predicting the enzymatic activity of polymorphic variants of CYP. This prediction will be helpful for advanced drug design because calculations forecast unexpected change in drug efficacy for individuals. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Medicinal Flowers. XXXI. Acylated oleanane-type triterpene saponins, Sasanquasaponins I-V, with antiallergic activity from the flower buds of Camellia sasanqua

The methanolic extract and its 1-butanol-soluble fraction from the flower buds of Camellia sasanqua THUNB. were found to show inhibitory activities on the release of β-hexosaminidase from rat basophile leukemia (RBL-2H3) cells. From the 1-butanol-soluble fraction, five new acylated oleanane-type triterpene saponins, sasanquasaponins I-V, were isolated together with a known saponin and their chemical structures were elucidated on the basis of chemical and physicochemical evidence. The principal saponin constituents, sasanquasaponins I-III, with an acyl group at the 22-position of the aglycon part showed the inhibitory effects on the release of β-hexosaminidase and some structure-activity relationships were reported.     

Quantum coherence in a superfluid Josephson junction

We report a new kind of experiment in which we take an array of nanoscale apertures that form a superfluid (4)He Josephson junction and apply quantum phase gradients directly along the array. We observe collective coherent behaviors from aperture elements, leading to quantum interference. Connections to superconducting and Bose-Einstein condensate Josephson junctions as well as phase coherence among the superfluid aperture array are discussed.     

Quantum interference of Rashba-type spin-split surface state electrons

We studied the quantum interference of electrons in the Bi (p(x), p(y)) orbital-derived j = 1/2 spin-split surface states at Bi/Ag(111)√3 × √3 surfaces of 10 monolayer thick Ag(111) films on Si(111) substrates. Surface electron standing waves were observed clearly at the energy (E) below the intersection of the two spin-split downward dispersing parabola bands (E(x)). The E dependence of the standing wave pattern reveals the dispersion as the average of the two spin-split surface bands due to the interference between |(k + Δ), ↑> and |-(k - Δ), ↑> [or (|(k - Δ), ↓>) and |-(k + Δ), ↓>] states. In contrast, it was impossible to deduce the dispersion from the standing wave pattern at E ≥ E(x) because the surface electron cannot find its backscattered state with the same spin polarization.