Reduction in sample injection bias using pressure gradients generated on chip

Sample injection in microchip-based capillary zone electrophoresis (CZE) frequently rely on the use of electric fields which can introduce differences in the injected volume for the various analytes depending on their electrophoretic mobilities and molecular diffusivities. While such injection biases may be minimized by employing hydrodynamic flows during the injection process, this approach typically requires excellent dynamic control over the pressure gradients applied within a microfluidic network. The current article describes a microchip device that offers this needed control by generating pressure gradients on-chip via electrokinetic means to minimize the dead volume in the system. In order to realize the desired pressure-generation capability, an electric field was applied across two channel segments of different depths to produce a mismatch in the electroosmotic flow rate at their junction. The resulting pressure-driven flow was then utilized to introduce sample zones into a CZE channel with minimal injection bias. The reported injection strategy allowed the introduction of narrow sample plugs with spatial standard deviations down to about 45 μm. This injection technique was later integrated to a capillary zone electrophoresis process for analyzing amino acid samples yielding separation resolutions of about 4–6 for the analyte peaks in a 3 cm long analysis channel.     

Molecular assembly of artificial photosynthetic antenna core complex on an amino-terminated ITO electrode

Bacterial photosynthetic membrane proteins, light-harvesting antenna complex (LH1), reaction center (RC), and their combined ‘core’ complex (LH1–RC) are functional elements in the primary photosynthetic events, i.e., capturing and transferring light energy and subsequent charge separation. These photosynthetic units (PSUs) isolated from Rhodospirillum rubrum (Rs. rubrum) were assembled onto an ITO electrode modified with 3-aminopropyltriethoxysilane (APS–ITO). The near IR absorption spectra of PSUs on the assembled electrodes were identical to those of solutions, indicating that the LH1 and LH1–RC core complexes were native on the electrode. Photocurrent response of PSUs on the electrode was examined upon illumination of the LH1 complex at 880 nm. The LH1–RC and a mixed assembly of LH1 and RC exhibited photocurrent response, but not LH1 only, consistent with the function of these PSUs, capturing light energy and transferring electron. This result provides useful methodology for building an artificial fabrication of PSUs on the electrode.     

Syntheses and Immunological Evaluation of Self‐Adjuvanting Clustered N‐Acetyl and N‐Propionyl Sialyl‐Tn Combined with a T‐helper Cell Epitope as Antitumor Vaccine Candidates

Sialyl‐Tn (STn) is a tumor‐associated carbohydrate antigen (TACA) rarely observed on healthy tissues. We synthesized two fully synthetic N‐acetyl and N‐propionyl STn trimer (triSTn) vaccines possessing a T‐helper epitope and a TLR2 agonist, since the clustered STn antigens are highly expressed on many cancer cells. Immunization of both vaccines in mice induced the anti‐triSTn IgG antibodies, which recognized triSTn‐expressing cell lines PANC‐1 and HepG2. The N‐propionyl triSTn vaccine induced the triSTn‐specific IgGs, while IgGs induced by the N‐acetyl triSTn vaccine were less specific. These results illustrated that N‐propionyl triSTn is a valuable unnatural TACA for anticancer vaccines.     

Thiophene‐Based,Radial π‐Conjugation: Synthesis,Structure, and Photophysical Properties of Cyclo‐1,4‐phenylene‐2′,5′‐thienylenes

The synthesis of cyclo‐1,4‐phenylene‐2′,5′‐thienylenes (CPTs) as the first example of a thiophene‐based, radially π‐conjugated system is described. X‐ray crystal structures, UV‐vis absorption and emission spectra, and theoretical studies revealed the unique structural and photophysical properties of CPTs. With all of these unique structural and photophysical properties, the radially π‐conjugated CPTs are expected to open a door for the discovery and development of new functional organic materials.     

Design of biomolecular interface for detecting carbohydrate and lectin weak interactions

A hybrid functional biomolecular interface designed at a molecular size level is very effective at capturing an analyte with high sensitivity even if the interaction is very weak, as when detecting proteins with carbohydrate. We designed and processed a protein (lectin) recognition molecular interface taking the following points into consideration: (1) the height (molecular length) difference between the capturing and spacer molecules; (2) the ratio of capturing molecules in the recognition interface. When the height difference between the maltoside part (Concanavalin A (Con A) recognition group) and the OH group terminated spacer molecules exceeded (>(CH(2))(6)), the association rate constant (k(a)) became larger (k(a)(1/Ms): ～2.6 times) and the dissociation constant (K(D)) became much smaller (K(D)(M): 1.0 × 10(-6): ～0.17 times) compared with the similar heights (lengths) of both molecular interfaces. With regard to maltoside density, a 100% maltoside monolayer was unsuitable for detecting Con A. We constructed a nanostructured recognition site with a maltoside part of 10%, which was the most suitable ratio for Con A detection. The binding interaction between Con A and the maltoside group was changed from monovalent binding to bivalent binding when the maltoside part was diluted in the recognition interface. From electrochemical measurements, even though there was a small amount of maltoside component on the suitable recognition monolayer, quality similar to that of 100% maltoside was observed.     

Two-step adsorption on jungle-gym-type porous coordination polymers: dependence on hydrogen-bonding capability of adsorbates, ligand-substituent effect, and temperature

A preliminary study of isopropanol (IPA) adsorption/desorption isotherms on a jungle-gym-type porous coordination polymer, [Zn(2)(bdc)(2)(dabco)](n) (1, H(2)bdc = 1,4-benzenedicarboxylic acid, dabco =1,4-diazabicyclo[2.2.2]octane), showed unambiguous two-step profiles via a highly shrunk intermediate framework. The results of adsorption measurements on 1, using probing gas molecules of alcohol (MeOH and EtOH) for the size effect and Me(2)CO for the influence of hydrogen bonding, show that alcohol adsorption isotherms are gradual two-step profiles, whereas the Me(2)CO isotherm is a typical type-I isotherm, indicating that a two-step adsorption/desorption is involved with hydrogen bonds. To further clarify these characteristic adsorption/desorption behaviors, selecting nitroterephthalate (bdc-NO(2)), bromoterephthalate (bdc-Br), and 2,5-dichloroterephthalate (bdc-Cl(2)) as substituted dicarboxylate ligands, isomorphous jungle-gym-type porous coordination polymers, {[Zn(2)(bdc-NO(2))(2)(dabco)]·solvents}(n) (2 ? solvents), {[Zn(2)(bdc-Br)(2)(dabco)]·solvents}(n) (3 ? solvents), and {[Zn(2)(bdc-Cl(2))(2)(dabco)]·solvents}(n) (4 ? solvents), were synthesized and characterized by single-crystal X-ray analyses. Thermal gravimetry, X-ray powder diffraction, and N(2) adsorption at 77 K measurements reveal that [Zn(2)(bdc-NO(2))(2)(dabco)](n) (2), [Zn(2)(bdc-Br)(2)(dabco)](n) (3), and [Zn(2)(bdc-Cl(2))(2)(dabco)](n) (4) maintain their frameworks without guest molecules with Brunauer-Emmett-Teller (BET) surface areas of 1568 (2), 1292 (3), and 1216 (4) m(2) g(-1). As found in results of MeOH, EtOH, IPA, and Me(2)CO adsorption/desorption on 2-4, only MeOH adsorption on 2 shows an obvious two-step profile. Considering the substituent effects and adsorbate sizes, the hydrogen bonds, which are triggers for two-step adsorption, are formed between adsorbates and carboxylate groups at the corners in the pores, inducing wide pores to become narrow pores. Interestingly, such a two-step MeOH adsorption on 2 depends on the temperature, attributed to the small free-energy difference (ΔF(host)) between the two guest-free forms, wide and narrow pores.     

X‐ray and neutron scattering on disordered nanosize clusters: a case study of lead‐zirconate‐titanate solid solutions

Defects and frequently used defect models of solids are reviewed. Signatures for identifying the disorder from x‐ray and neutron scattering data are given. To give illustrative examples how technologically important defects contribute to x‐ray and neutron scattering numerical method able to treat non‐periodical solids possessing several simultaneous defect types is given for simulating scattering in nanosize disordered clusters. The approach takes particle size, shape, and defects into account and isolates element specific signals. As a case study a statistical approximation model for lead‐zirconate titanate [Pb(Zr_xTi)O₃, PZT] is introduced. PZT is a material possessing several defect types, including substitutional, displacement and surface defects. Spatial composition variation is taken into account by introducing a model in which the edge lengths of each cell depend on the distribution of Zr and Ti ions in the cluster. Spatially varying edge lengths and angles is referred to as microstrain. The model is applied to compute the scattering from ellipsoid shaped PZT clusters and to simulate the structural changes as a function of average composition. Two‐phase co‐existence range, the so called morphotropic phase boundary composition is given correctly. The composition at which the rhombohedral and tetragonal cells are equally abundant was . Selected x‐ray and neutron Bragg reflection intensities and line shapes were simulated. Examples of the effect of size and shape of the scattering clusters on diffraction patterns are given and the particle dimensions, computed through Scherrer equation, are compared with the exact cluster dimensions. Scattering from two types of 180° domains in spherical particles, one type assigned to Ti‐rich PZT and the second to the MPB and Zr‐rich PZT, is computed. We show how the method can be used for modelling polarization reversal.

     

Redox Reaction in Ti−Mn Redox Flow Battery Studied by X-ray Absorption Spectroscopy

We performed X-ray absorption studies for the electrolytes of a Ti−Mn redox flow battery (RFB) to understand the redox reaction of the Ti/Mn ions and formation of precipitates in charged catholyte, because suppression of the disproportionation reaction is a key to improve the cyclability of Ti−Mn RFB and enhance the energy density. Hard X-ray absorption spectroscopy with a high transmittance and soft X-ray absorption spectroscopy to directly observe the 3d orbitals were complementarily employed. Moreover, the Ti/Mn 3d electronic structure for each precipitate and solution in the charged catholyte was investigated by using scanning transmission X-ray microscopy: the valence of Mn in the precipitate is mostly attributed to 4+, and the solution includes only Mn²⁺. This charge disproportionation reaction should occur after the Mn ions in the catholyte should be oxidized from Mn²⁺ to Mn³⁺ by charge.     

Specific detection of Lewis x-carbohydrates in biological samples using liquid chromatography/multiple-stage tandem mass spectrometry

The Lewis x structure [Lex, Galbeta1-4(Fucalpha1-3)GlcNAc] motif is one of the tumor antigens and plays an important role in oncogenesis, development, cellular differentiation and adhesion. The detection of Lex-carbohydrates and their structural analysis are necessary to clarify the role of Lex in several biological events. Mass spectrometry has been preferably used for the structural analysis of carbohydrates. Especially, collision-induced dissociation (CID) tandem mass spectrometry (MS/MS), which causes a glycosidic bond cleavage, is used for carbohydrate sequencing. However, Lex cannot be identified by MS/MS due to the existence of the positional isomers, such as Lewis a [Galbeta1-3(alpha1-4Fuc)GlcNAc]. In the present study, we demonstrate the specific detection of Lex-carbohydrates in a biological sample by using multiple-stage MS/MS (MSn). Using pyridylaminated oligosaccharides bearing Lex, we found that the Lex-motif yields a cross-ring fragment by the cleavage of a bond between C-3 and C-4 of GlcNAc in Gal(Fuc)GlcNAc. The Lex-specific cross-ring fragment ion at m/z 259 was effectively detected by sequential scans, consisting of a full MS1 scan, data-dependent CID MS2 scan, MS3 of [Gal(Fuc)GlcNAc+Na]+ at m/z 534, and MS4 of [GalGlcNAc+Na]+ at m/z 388. The sequential scan was applied to N-linked oligosaccharide profiling using a LC/ESI-MSn system equipped with a graphitized carbon column. We successfully detected the Lex-motif and elucidated the structures of several Lex and Lewis y [(Fucalpha1-2)Galbeta1-4(Fucalpha1-3)GlcNAc] oligosaccharides in the murine kidney used as a model tissue. Our method is expected to be a powerful tool for the specific detection of the Lex-motif, and structural elucidation of Lex-carbohydrates in biological samples.