Direct patterning of composite biocompatible microstructures using microfluidics

This study demonstrates a versatile and fast method for patterning three-dimensional (3D) monolithic microstructures made of multiple (up to 24 demonstrated) types of materials, all spatially aligned, inside a microchannel. This technique uses confocal scanning or conventional fluorescence microscopy to polymerize selected regions of a photocurable material, and microfluidics to automate the delivery of a series of washes and photocurable reagents. Upon completion of lithographic cycles, the aligned 3D microstructures are suitable for microfluidic manipulation and analysis. We demonstrated the fabrication of composite 3D microstructures with various geometries, size scales (up to 1 mm2), spatial resolution (down to 3 microm), and materials. For a typical multi-cycle process, the total fabrication time was tens of minutes, compared to tens of hours for conventional methods. In the case of 3D hydrogels, a potential use is the direct patterning of inhomogeneous 3D microenvironments for studying cell behavior.     

Temperature‐induced phase transition of poly(N‐n‐propylacrylamide‐co‐butyl methacrylate‐co‐N,N‐diethylaminoethyl methacrylate)

Terpolymers composed of N‐n‐propylacrylamide (NPAAm), butyl methacrylate (BMA), and N,N‐diethylaminoethyl methacrylate (DEAEMA) were prepared in an attempt to investigate the temperature‐induced phase transition and its mechanism. Poly(NPAAm) showed the lower critical solution temperature (LCST) around 24°C in water. With the incorporation of DEAEMA with NPAAm, the LCST change was characterized by an initial increase. However, the LCST was shifted to the lower temperature at the later stage. This might be explained in terms of hydrophilic/hydrophobic contribution of DEAEMA to the LCST. The swelling behavior of copolymer gel in the various solvents and spin‐lattice relaxation time (T₁) study by NMR strongly suggested the hydrophilic/hydrophobic contribution of DEAEMA to the LCST depending on the local environment. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1407–1411, 1999     

Tough and tunable adhesion of hydrogels: experiments and models

As polymer networks infiltrated with water, hydro-gels are major constituents of animal and plant bodies and have diverse engineering applications. While natural hydro-gels can robustly adhere to other biological materials, such as bonding of tendons and cartilage on bones and adhe-sive plaques of mussels, it is challenging to achieve such tough adhesions between synthetic hydrogels and engineer-ing materials. Recent experiments show that chemically anchoring long-chain polymer networks of tough synthetic hydrogels on solid surfaces create adhesions tougher than their natural counterparts, but the underlying mechanism has not been well understood. It is also challenging to tune sys-tematically the adhesion of hydrogels on solids. Here, we provide a quantitative understanding of the mechanism for tough adhesions of hydrogels on solid materials via a com-bination of experiments, theory, and numerical simulations. Using a coupled cohesive-zone and Mullins-effect model val-idated by experiments, we reveal the interplays of intrinsic work of adhesion, interfacial strength, and energy dissipation in bulk hydrogels in order to achieve tough adhesions. We fur-ther show that hydrogel adhesion can be systematically tuned by tailoring the hydrogel geometry and silanization time of solid substrates, corresponding to the control of energy dis-sipation zone and intrinsic work of adhesion, respectively. The current work further provides a theoretical foundation for rational design of future biocompatible and underwater adhesives.     

The shear modulus of the human vocal fold in a transverse direction

The aim of this study was to measure the shear modulus of the vocal fold in a human hemilarynx, such that the data can be related to direction of applied stress and anatomical context. Dynamic spring rate data were collected using a modified linear skin rheometer using human hemilarynges, and converted to estimated shear modulus via application of a simple shear model. The measurement probe was attached to the epithelial layer of the vocal fold cover using suction. A sinusoidal force of 3g was applied to the epithelium, and the resultant displacement logged at a rate of 1kHz. Force measurement accuracy was 20microg and position measurement accuracy was 4microm. The force was applied in a transverse direction at the midmembranous point between the vocal process and the anterior commissure. The shear modulus of the three female vocal folds ranged from 814 to 1232Pa. The shear modulus of the three male vocal folds ranged from 1021 to 1796Pa. These data demonstrate that it is possible to obtain estimates for the shear modulus of the vocal fold while preserving anatomical context. The modulus values reported here are higher than those reported using parallel plate rheometry. This is to be expected as the tissue is attached to surrounding structures, and is under natural tension.     

Surface complexation mechanism and modeling in Cr(III) biosorption by a microalgal isolate, Chlorella miniata

The mechanism involved in the removal of Cr(III) by a green microalgal isolate, Chlorella miniata, was examined based on a series of batch experiments and microscopic analyses, and a mathematical model was proposed. Results showed that Cr(III) biosorption increased with the increase of pH from 2.0 to 4.5, and no significant changes in biosorption outside this pH range. Langmuir isotherm indicated that the maximum Cr(III) sorption capacity of Chlorella miniata was 14.17, 28.72, and 41.12 mg g(-1) biomass at pH 3.0, 4.0, and 4.5, respectively. Results from desorption studies, SEM (scanning electron microscopy), TEM (transmission electron microscopy), and EDX (energy-dispersive X-ray spectroscope) analyses confirmed that surface complexation was the main process involved in Cr(III) biosorption. Potentiometric titration revealed that carboxyl (pKa1 = 4.10), phosphonate (pKa2 = 6.36) and amine (pKa3 = 8.47) functional groups on the surface of Chlorella miniata were the possible sites for Cr uptake, and their average amounts were 0.53, 0.39, and 0.36 mmol g(-1) biomass, respectively. A surface complexation model further indicated that carboxyl group played the main role in Cr(III) complexation, with a binding constant of K11 = 1.87 x 10(-4) and K12 = 6.11 x 10(-4) for Cr3+ and Cr(OH)2+, respectively. This model also suggested that the hydroxy species was more easily to complex with the cell surface of Chlorella miniata.     

Magnetized hypermassive neutron-star collapse: a central engine for short gamma-ray bursts

A hypermassive neutron star (HMNS) is a possible transient formed after the merger of a neutron-star binary. In the latest axisymmetric magnetohydrodynamic simulations in full general relativity, we find that a magnetized HMNS undergoes "delayed" collapse to a rotating black hole (BH) as a result of angular momentum transport via magnetic braking and the magnetorotational instability. The outcome is a BH surrounded by a massive, hot torus with a collimated magnetic field. The torus accretes onto the BH at a quasisteady accretion rate [FORMULA: SEE TEXT]; the lifetime of the torus is approximately 10 ms. The torus has a temperature [FORMULA: SEE TEXT], leading to copious ([FORMULA: SEE TEXT]) thermal radiation that could trigger a fireball. Therefore, the collapse of a HMNS is a promising scenario for generating short-duration gamma-ray bursts and an accompanying burst of gravitational waves and neutrinos.     

Optimal ellipsoids and decomposition of positive definite matrices

Given a positive definite matrix A, we characterize the unique diagonal matrix D, D?A, with the smallest determinant. Equivalently, given an ellipsoid A, we characterize the unique ellipsoid of the largest volume contained in A, with principal axes parallel to the coordinate axes.