One‐Pot Synthesis of (−)‐Oseltamivir and Mechanistic Insights into the Organocatalyzed Michael Reaction

The one‐pot sequential synthesis of (?)‐oseltamivir has been achieved without evaporation or solvent exchange in 36 % yield over seven reactions. The key step was the asymmetric Michael reaction of pentan‐3‐yloxyacetaldehyde with (Z)‐N‐2‐nitroethenylacetamide, catalyzed by a diphenylprolinol silyl ether. The use of a bulky O‐silyl‐substituted diphenylprolinol catalyst, chlorobenzene as a solvent, and HCO₂H as an acid additive, were key to produce the first Michael adduct in both excellent yield and excellent diastereo‐ and enantioselectivity. Investigation into the effect of acid demonstrated that an acid additive accelerates not only the E–Z isomerization of the enamines derived from pentan‐3‐yloxyacetaldehyde with diphenylprolinol silyl ether, but also ring opening of the cyclobutane intermediate and the addition reaction of the enamine to (Z)‐N‐2‐nitroethenylacetamide. The transition‐state model for the Michael reaction of pentan‐3‐yloxyacetaldehyde with (Z)‐N‐2‐nitroethenylacetamide was proposed by consideration of the absolute configuration of the major and minor isomers of the Michael product with the results of the Michael reaction of pentan‐3‐yloxyacetaldehyde with phenylmaleimide and naphthoquinone.     

Amperometric Urea Biosensor Using Aminated Glassy Carbon Electrode Covered with Urease Immobilized Carbon Sheet,Based on the Electrode Oxidation of Carbamic Acid

A large oxidation current can be observed when ammonium carbamate aqueous solution is electrolyzed using a glassy carbon electrode (GCE) at a potential exceeding 1.0 V vs. Ag/AgCl and amino groups are introduced at the surface of the GCE. Aminated GCE exhibits the electrocatalytic activity of the oxidation of ammonium carbamate that is produced from urea as an intermediate product of urease reaction, and a distinct oxidation current is observed when the aminated GCE is used to oxidize the urea in the urease solution. A novel amperometric determination method to detect urea has been developed. This method is based on the electrooxidation of carbamic acid produced during urease reactions. Urease is immobilized to polymaleimidostyrene (PMS) coated on the insulated amorphous carbon sheet set on the aminated GCE surface. A good linear relationship is observed between urea concentration and the electrolytic current of the urease‐immobilized electrode in the concentration range from 0.5 mM to 21.0 mM. The proposed urea biosensor has an effective merit in that the interference resulting from ammonia and pH change caused by the urease reaction can be eliminated, differing from conventional urea biosensors.     

Deprotonative Metalation of Functionalized Aromatics Using Mixed Lithium–Cadmium,Lithium–Indium,and Lithium–Zinc Species

In situ mixtures of CdCl₂?TMEDA (0.5 equiv; TMEDA=N,N,N′,N′‐tetramethylethylenediamine) or InCl₃ (0.33 equiv) with [Li(tmp)] (tmp=2,2,6,6‐tetramethylpiperidino; 1.5 or 1.3 equiv, respectively) were compared with the previously described mixture of ZnCl₂?TMEDA (0.5 equiv) and [Li(tmp)] (1.5 equiv) for their ability to deprotonate anisole, benzothiazole, and pyrimidine. [(tmp)₃CdLi] proved to be the best base when used in tetrahydrofuran at room temperature, as demonstrated by subsequent trapping with iodine. The Cd–Li base then proved suitable for the metalation of a large range of aromatics including benzenes bearing reactive functional groups (CONEt₂, CO₂Me, CN, COPh) or heavy halogens (Br, I), and heterocycles (from the furan, thiophene, pyrrole, oxazole, thiazole, pyridine, and diazine series). Five‐membered heterocycles benefiting from doubly activated positions were similarly dideprotonated at room temperature. The aromatic lithium cadmates thus obtained were involved in palladium‐catalyzed cross‐coupling reactions or simply quenched with acid chlorides.     

Chemically amplified kojic acid responses of tyrosinase-based biosensor, based on inhibitory effect to substrate recycling driven by tyrosinase and -ascorbic acid

A tyrosinase-based chemically amplified biosensor, based on the substrate recycling of polyphenols driven by tyrosinase-catalyzed oxidation and chemical reduction by -ascorbic acid (AsA), has been utilized for the highly sensitive detection of inhibitors of tyrosinase such as kojic acid, benzoic and SCN⁻ ion. The amplified current response of immobilized tyrosinase-coupling oxygen electrode due to the recycling was suppressed by the addition of inhibitors, and a highly amplified response to kojic acid over other inhibitors was observed in the presence of 5 mM AsA. The amplification factor (AF) of kojic acid is substantially proportional to the AF of substrates, and the AF for 1 × 10⁻⁷ M kojic acid was increased by up to a factor of 143 when 1 × 10⁻⁵ M dopamine was used as a competitive substrate in the presence of 5 mM AsA. The amplified calibration curve of kojic acid obtained with 5 mM AsA was shifted towards more than a two decades lower concentration range compared with that of the non-amplified response, and the detection limit of kojic acid was lowered to 7 × 10⁻⁸ M.     

Chemically amplified kojic acid responses of tyrosinase-based biosensor, based on inhibitory effect to substrate recycling driven by tyrosinase and l-ascorbic acid

A tyrosinase-based chemically amplified biosensor, based on the substrate recycling of polyphenols driven by tyrosinase-catalyzed oxidation and chemical reduction by l-ascorbic acid (AsA), has been utilized for the highly sensitive detection of inhibitors of tyrosinase such as kojic acid, benzoic and SCN(-) ion. The amplified current response of immobilized tyrosinase-coupling oxygen electrode due to the recycling was suppressed by the addition of inhibitors, and a highly amplified response to kojic acid over other inhibitors was observed in the presence of 5 mM AsA. The amplification factor (AF) of kojic acid is substantially proportional to the AF of substrates, and the AF for 1 x 10(-7)M kojic acid was increased by up to a factor of 143 when 1 x 10(-5)M dopamine was used as a competitive substrate in the presence of 5 mM AsA. The amplified calibration curve of kojic acid obtained with 5 mM AsA was shifted towards more than a two decades lower concentration range compared with that of the non-amplified response, and the detection limit of kojic acid was lowered to 7 x 10(-8)M.     

Falling of a Spherical Particle in Fine-Bubble Plume and Fine-Bubble Behavior around the Particle

Fluid Dynamics - In this study, the interaction between a spherical solid particle descending in a fine-bubble plume and the fine-bubbles around the particle is investigated experimentally. The...     

Non-scalar contribution of potential in crystals

Ewald-parameter dependence of Coulomb interaction in ionic crystals was studied using a point-charge model. In the presence of the long-range interaction, the ion configuration breaks spherical symmetry of local potential and charge at each ion site, and gives non-scalar contributions to them. This non-scalar potential has similar effects to Heisenberg interaction, while is intrinsically distinct from conventional multipole expansions of the scalar potential. Symmetry and magnitude of the scalar and non-scalar potentials are similar for most materials despite the different definitions, but one exception can be seen in parent materials of hole-doped high-_Tc$T_{\mathrm{c}}$ cuprates.     

Stereoselective synthesis of bicyclo[3.1.1]heptane derivatives via intramolecular photocycloaddition reaction

Optically active 1,3-bridged cyclobutanes 10 of the bicyclo[3.1.1]heptane ring system and 1,2-bridged cyclobutanes 11 of the bicyclo[3.2.0]heptane ring system were produced by UV irradiation of alpha,beta,gamma,delta-unsaturated esters 9a and 9c-f. The preference of endo-stereochemistry at C-6 bridged head was observed in cross-adducts 10. On the other hand, irradiation of conjugated dienol 9b led via only parallel cycloaddition to 1,2-bridged cyclobutane 11.     

GaInAsP/InP surface-emitting laser diode

In this review paper, we will introduce the advantages and laser characteristics of GaInAsP/InP surface-emitting (SE) lasers. In order to obtain the room temperature oscillation of the SE laser diodes, it is very important to reduce not only its threshold current density but also threshold current itself. To decrease its threshold current density and/or its threshold current, we investigated some possible SE laser structures. First, we tried to reduce the threshold current density by introducing (i) a Au/SiO₂ mirror, (ii) a dielectric multilayer mirror to increase the n-side (output-side) reflectivity, and (iii) multi-active-layer structure. Next, to reduce the threshold current, certain types of current confining structure, namely (i) a round-high-mesa/polyimide-buried structure, (ii) a planar buried heterostructure (PBH), (iii) a circular buried heterostructure (CBH) with SiO₂ mask and (iv) a flat surface circular buried heterostructure (FCBH), were investigated. The threshold current of the SE laser was reduced to 18 mA and its highest operation temperature was raised to 263 K (–10°C).