Synthesis of 2-(1-Arylcarbonyl-1-arylazomethylidene)-thiazolidines by the Reaction of 2-(Arylcarbonyl-methylidene)thiazolidines with Diazobenzenes

A variety of 2-(1-arylcarbonyl-1-arylazomethylidene)-thiazolidenes were synthesized in excellent yields by the reaction of 2-(arylcarbonylmethylidene)thiazolidines with diazobenzenes.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Indecomposable representations and boson realizations of the nonlinear deformed angular momentum algebra of Witten’s first type

In this paper indecomposable representations and boson realizations of the nonlinear angular momentum algebra $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ of Witten’s first type are investigated in a purely algebraic manner. Explicit form of the master representation of $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ on the space of its universal enveloping algebra is given. Then, from this master representation, other indecomposable representations are obtained in explicit form. Various kinds of single-boson, single inverse boson, and double-boson realizations of $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ are respectively obtained by generalizing the Holstein–Primakoff realization, the Dyson realization, and the Jordan–Schwinger realization of the Lie algebras SU(2) and SU(1,1). For each kind, the unitary realization, the nonunitary realization, and their connection by the corresponding similarity transformation are respectively discussed. Using a kind of double-boson realizations, the irreducible representation of $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ in the angular momentum basis is given.     

A novel efficient protocol for preparation of 3-formyl-2-arylbenzo[b]furan derivatives

An efficient method for preparation of 3-formyl-2-arylbenzo[b]furan derivatives 4 from 3-chloro-2-(2-methoxyaryl)-1-arylprop-2-en-1-one 2 was developed, and the desired product was obtained in good to excellent yields. By converting 2-(2-methoxyphenyl)-3-oxo-3-phenylpropanal 1 to 2, the regioselectivity problem occurring in the reaction when using 1 as the starting material was successfully avoided. Furthermore, a one-pot procedure for the successive demethylation, cyclization, and hydrolysis was evolved, although the intermediate 3-(dibromomethyl)-2-phenylbenzo[b]furan 3a could be isolated. A plausible mechanism was proposed based on some in situ investigations.     

Pt/NbPWO双功能催化剂的制备及氢解碱木质素制备芳香单体

木质素是一种天然芳香族聚合物,约占木质纤维素的30%,是唯一通过裂解C―O醚键和C―C键生产芳香族化学品或液体燃料的可再生芳香族资源。迄今为止,对木质素氢解制备有价值化合物的研究主要集中在相对不稳定的C―O键的裂解上,这限制了木质素氢解的效率。采用水热法和湿浸渍法制备了多功能Pt/NbPWO催化剂。通过破坏碱木质素中的C―O键和C―C键,可以得到产率为18.02%的芳香族单体。该反应不仅可以断裂木质素聚合物中醚键,同时也可以断裂部分关键的C―C键。其氢解机理可能是丰富的Brønsted酸和Lewis酸位点参与了C―C的活化。此外,重点分析载体和Pt物种在Pt/NbPWO催化剂中的协同作用。     

Phenylboronic acid-functionalized cross-linked chitosan magnetic adsorbents for the magnetic solid-phase extraction of benzoylurea pesticides

In this study, a 4-formylphenylboronic acid-modified cross-linked chitosan magnetic nanoparticle (FPBA@CCHS@Fe₃O₄) was fabricated. The synthesized material was utilized as the magnetic solid-phase extraction adsorbent for the enrichment of six benzoylurea pesticides. In addition to B-N coordination, FPBA@CCHS@Fe₃O₄ interacts with benzoylureas through hydrogen bonds and π-π stacking interaction on account of rich active groups (amino and hydroxyl) and aromatic rings in structure. Compared to traditional extraction methods, less adsorbent (20 mg) and reduced extraction time (3 min) were achieved. The adsorbent also exhibited good reusability (no less than 10 times). Coupled with a high-performance liquid chromatography–diode array detector, satisfactory recoveries (89.1–103.9%) and an acceptable limit of detection (0.2–0.7 μg/L) were obtained. Under optimized conditions, the established method was successfully applied to the tea infusion samples from six major tea categories with acceptable recoveries ranging from 76.8 to 110%, indicating its application potential for the quantitative detection of pesticides in complex matrices.     

Removal of Cu(II) Contamination from Aqueous Solution by Ethylenediamine@β-Zeolite Composite

The low cost β-zeolite and ethylenediamine modified β-zeolite (EDA@β-zeolite) were prepared by self-assembly method and used for Cu(II) removal from contaminated aqueous solution. Removal ability of β-zeolite toward Cu(II) was greatly improved after ethylenediamine (EDA) modification, the removal performance was greatly affected by environmental conditions. XPS results illustrated that the amide group played important role in the removal process by forming complexes with Cu(II). The EDA@β-zeolite showed desirable recycling ability. The finding herein suggested that the proposed composite is a promising and suitable candidate for the removal of Cu(II) from contaminated natural wastewater and aquifer.     

Cylindrical invisibility cloak with simplified material parameters is inherently visible

It was proposed that perfect invisibility cloaks can be constructed for hiding objects from electromagnetic illumination [J. B. Pendry, D. Schurig, and D. R. Smith, Science 312, 1780 (2006)10.1126/science.1125907]. The cylindrical cloaks experimentally demonstrated [D. Schurig, Science 314, 977 (2006)10.1126/science.1133628] and theoretically proposed [W. Cai, Nat. Photon. 1, 224 (2007)10.1038/nphoton.2007.28] have however simplified material parameters in order to facilitate easier realization as well as to avoid infinities in optical constants. Here we show that the cylindrical cloaks with simplified material parameters inherently allow the zeroth-order cylindrical wave to pass through the cloak as if the cloak is made of a homogeneous isotropic medium, and thus visible. To all high-order cylindrical waves, our numerical simulation suggests that the simplified cloak inherits some properties of the ideal cloak, but finite scatterings exist.     

Ideal cylindrical cloak: perfect but sensitive to tiny perturbations

A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, because of the slow convergence of the zeroth-order scattering coefficients, a tiny perturbation on the cloak would induce a noticeable field scattering and penetration.