Anomalous heat evolution of deuteron implanted al upon electron bombardment III - try to observe the nuclear d-d reaction

In previous papers, one of the authors (K. K.) has observed the anomalous melting of the surface layer of deuteron implanted Al, containing so-called "tunnel structures", on the electron bombardment in transmission electron microscope. In the present paper, we intended to observe the evidence of the d-d nuclear reaction, expecting neutron emission, associated with the melting phenomenon. However, the result was rather unexpected. The melting phenomenon was certainly observed under the same experimental conditions as before. But, in spite of the melting, neutron emission associated with the nuclear reaction was not observed. And, more unexpectedly, X-ray emission of energy less than roughly 400 v keV was observed when specimens with a bubble structure, which never showed melting, were bombarded with electron beams. Several conceivable mechanisms are discussed which, however, are all not convincing to explain the melting. The melting is attributed to some excess energy generation. The error estimation of the radiation measurements was undertaken.     

Changes in diffusion tensor imaging (DTI) eigenvalues of skeletal muscle due to hybrid exercise training

Several studies have proposed the cell membrane as the main water diffusion restricting factor in the skeletal muscle cell. We sought to establish whether a particular form of exercise training (which is likely to affect only intracellular components) could affect water diffusion. The purpose of this study is to characterise prospectively the changes in diffusion tensor imaging (DTI) eigenvalues of thigh muscle resulting from hybrid training (HYBT) in patients with non-alcoholic fatty liver disease (NAFLD). Twenty-one NAFLD patients underwent HYBT for 30 minutes per day, twice a week for 6 months. Patients were scanned using DTI of the thigh pre- and post-HYBT. Fractional anisotropy (FA), apparent diffusion coefficient (ADC), the three eigenvalues lambda 1 (λ1), λ2, λ3, and the maximal cross sectional area (CSA) were measured in bilateral thigh muscles: knee flexors (biceps femoris (BF), semitendinosus (ST), semimembranous (SM)) and knee extensors (medial vastus (MV), intermediate vastus (IV), lateral vastus (LV), and rectus femoris (RF)), and compared pre- and post-HYBT by paired t-test. Muscle strength of extensors (P < 0.01), but not flexors, increased significantly post-HYBT. For FA, ADC and eigenvalues, the overall picture was of increase. Some (P < 0.05 in λ2 and P < 0.01 in λ1) eigenvalues of flexors and all (λ1-λ3) eigenvalues of extensors increased significantly (P < 0.01) post-HYBT. HYBT increased all 3 eigenvalues. We suggest this might be caused by enlargement of muscle intracellular space.     

具有脉冲的分数阶Bagley-Torvik 模型边值问题

将具有脉冲的分数阶Bagley-Torvik微分方程边值问题巧妙地转化为积分方程,定义加权Banach空间及全连续算子,运用不动点定理获得该边值问题解的存在性定理.举例说明了定理的应用.最后提出有趣的研究问题.     

广角任意反射面速度干涉仪的光学性质研究

研究了广角任意反射面速度干涉仪(VISAR)的光学性质。阐述了广角VISAR的原理,指出广角诊断靶中椭球镜的作用是将靶丸内表面成虚像在靶丸中心附近。使用Zemax模拟了成像弯曲对动态干涉条纹形成的影响,提出使用异形光纤面板进行像面矫正。研究了工程误差对干涉仪成像的影响,若要取得良好的成像效果,椭球镜的位置偏差不得多于30 μm,倾角不得超过4°,长轴方向加工误差需小于0.1 μm,短轴方向误差需小于4 μm,镜面反射率应高于70%。讨论了广角VISAR光学研究的进一步发展方向如影响动态条纹的更多可能因素、像面矫正的其他方法、物与像面的光学对应等。     

Equilibrium analysis of reactions between aromatic anions and nonionic surfactant micelles by capillary zone electrophoresis.

Separability of some positional isomers of aromatic anions by capillary zone electrophoresis was improved by adding nonionic surfactants to a migrating solution. Eleven kinds of aromatic anions, including positional isomers, were used as analytes, and Brij-35, Brij-58 and Brij-78 were investigated as nonionic surfactants to form micelles, where hydrophobicities are different from each other. Increasing the concentration of the surfactants developed the separability of the anionic isomers. The interaction between the anions and the nonionic surfactant micelles is also investigated through the change in the electrophoretic mobility, and the binding constants are determined. Apparent electrophoretic mobility of the anions decreased with increasing concentrations of the nonionic surfactants. The decrease in the mobility, as well as the binding constant, was larger in the monovalent anions than in the divalent anions, which indicates that the interaction or reactivity of the monovalent analytes is higher than that of the divalent analytes. The reactivity of each anion was almost identical even when the kinds of the surfactants were changed, suggesting that the hydrophobicity of the polyoxyethylene group in the surfactant would have the main role for binding the analytes. The reactivity tendency among the positional isomers was almost similar to that in ion association-capillary zone electrophoresis using tertabutylammonium ion as a pairing ion. The results obtained in this work suggest that the anions are bound to the micelles by the hydrophobic interaction between analyte anions and the polyoxyethylene moiety of the surfactant micelles. Changes in the fluorescence intensity of the anions were also investigated; the results can explain well the mobility changes of the analytes.     

Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions

Novel layer-by-layer (LbL) assembly films composed of poly( L-lysine) (PLL) and poly( D-lactic acid) (PDLA) were prepared by the alternate immersion of a gold substrate into an aqueous PLL solution and an acetonitrile solution of PDLA. The formation of the LbL assembly film was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy observation, and attenuated total reflection Fourier transform infrared spectroscopy measurement. The driving force responsible for the LbL assembly was determined by investigating the formation behavior of the LbL assembly under various conditions. The formation of the LbL assembly was not affected either by the stereochemistry of polylysine and poly(lactic acid) or by the addition of urea, which is known to inhibit hydrogen bonding interaction between polymers, into the aqueous PLL solution. The LbL assembly was also formed by the combination of PDLA and polycations other than polylysine, such as poly(diallyldimethylammonium chloride). On the other hand, the combination of PDLA and any polyanions such as poly(styrene sulfonate sodium salt) produced little corresponding LbL assembly. The increase in positive charge on the amino nitrogen atom of PLL enhanced the LbL assembly. These results suggest that the LbL assembly film composed of PLL and PDLA was fabricated by cation-dipole interactions between the positive charge on the amino nitrogen atom of PLL and the lone pairs of the carbonyl oxygen atom of PDLA.     

A theoretical study of the dehydration and the dehydrogenation processes of alcohols on metal oxides using MOPAC

Using a semi-empirical molecular orbital method, PM3, and 2-propanol as an example, the dehydration and the dehydrogenation processes of alcohol on oxide catalysts were studied. The catalysts addressed here were four kinds of oxides (Al₂O₃, SiO₂, ZnO, CdO) whose reaction selectivities had been experimentally determined. The usual models consisting of a surface metal ion, several oxide ions and an isopropoxy group were used in calculations. For the dehydration, heats of formation of the models were calculated at each point of the process where the distance between a β-hydrogen of the group and a basic site (i.e. oxygen of the group or a surface oxide ion) or a metal ion was gradually shortened, or where the length of the C–O bond of the group was gradually increased. A reasonable dehydration mechanism was estimated by comparing activation energies calculated from the transitions of the heats of formation. The most probable dehydrogenation mechanism was also estimated in a similar way by gradually making an -hydrogen close to a surface oxide ion, the metal ion or a surface proton. It was concluded that the dehydration proceeds by scission of the C–O bond of the group after its oxygen was attacked by some electrophile on the surface and that the dehydrogenation proceeds by a mechanism in which an -hydrogen of the group was extracted by the metal ion.

Based on the dehydration mechanism thus deduced, alkoxy groups generated by adsorption of the primary, secondary and tertiary alcohols on SiO₂ were calculated in order to estimate the activation energies of their decompositions. In result, the order of the energies was found to be in good agreement with that of the decomposition rates experimentally determined by Kitahara. This agreement gives support to the validity of the mechanism deduced for the dehydration of alcohol.     

Accelerated electrocyclic ring-opening of benzocyclobutenes under the influence of a beta-silicon atom

A significant acceleration effect of a beta-silicon atom was observed on the electrocyclic ring-opening reaction of benzocyclobutene derivatives to form o-quinodimethanes. This acceleration effect could be attributed to an electronic sigma-donating nature of the C(alpha)-Si(beta) bond, associated with alpha-anion driven pericyclic reactions.     

Photochemical aromatic hydroxylation by aromatic amine N-oxides: remarkable solvent effect on NIH-shift

Photooxygenations of 4-²H-anisole ($\text{3}$) and o-xylene ($\text{5}$) by 3-methylpyridazine 2-oxide ($\text{1}$) or pyridine 1-oxide ($\text{2}$) were studied in a variety of solvents at varying irradiation temperatures. Remarkable solvent effect on NIH-shift coupled with their hydroxylation processes was observed.