Synthesis and properties of poly(amic acid)s and polyimides based on 2,2′,6,6′‐biphenyltetracarboxylic dianhydride

Poly(amic acid)s (PAAs) having the high solution stability and transmittance at 365 nm for photosensitive polyimides have been developed. PAAs with a twisted conformation in the main chains were prepared from 2,2′,6,6′‐biphenyltetracarboxylic dianhydride (2,2′,6,6′‐BPDA) and aromatic diamines. Imidization of PAAs was achieved by chemical treatment using trifluoroacetic anhydride. Among them, the PAA derived from 2,2′,6,6′‐BPDA and 4,4′‐(1,3‐phenylenedioxy)dianiline was converted to the polyimide by thermal treatment. The heating at 300 °C under nitrogen did not complete thermal imidization of PAAs having glass‐transition temperatures (T_g)s higher than 300 °C to the corresponding PIs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6385–6393, 2006     

Characteristics of a protein error in determination of serum protein in the presence of inorganic salt.

There is a possibility that the color development of the dye-binding method based on a protein error of a pH indicator is affected by the coexisting inorganic salt. Thus, the author theoretically and experimentally investigated the effect of the inorganic salt on the protein error. In a theoretical analysis, the anion of an inorganic salt, like the dissociated dye and buffer anions, was assumed to react with the protein, forming a colorless anion-protein complex. The calculated results were compared with those obtained by experiments using three pH indicators and various kinds of inorganic salts. The calculated results obtained are as follows: (1) The color development decreases with increasing the concentration of the inorganic salt and the equilibrium constant of the reaction between the inorganic salt and protein; (2) The rate of the absorbance decrease is larger for a lower concentration of the inorganic salt than for a higher one; (3) The larger is the equilibrium constant, the larger is the absorbance decrease. The absorbance decrease was caused by the anion, and was increased by increasing the anion concentration. The magnitude of the effect of the anion was iodide > bromide > chloride, which was associated with their ionic radius. The difference in the effect of the anion was thought to indicate that the equilibrium constant, in other words, the bonding strength of the anion to protein is iodide > bromide > chloride.     

Anwendung des Alizarins und seiner Derivate zur Molybdänbestimmung

Zusammenfassung Eine Methode für die Bestimmung des Molybdäns mit Alizarinkomplexon wurde entwickelt und mit anderen Alizarin-Derivaten verglichen. In Alkohol-Wasser bildet sich bei pH 5 bei Alizarinkomplexon überschuß ein Komplex im Verhältnis 11, der bei 480 nm absorbiert. Der molare Extinktionskoeffizient ist 4,689 undK _f = 2,51 · 10⁵. Die Methode wurde zur Analyse einer Stahlprobe angewendet, wobei die störenden Elemente papierchromatographisch abgetrennt wurden.

---

Use of alizarin and its derivatives for the determination of molybdenum

Summary A method has been developed for the determination of molybdenum with alizarin complexone and compared with other alizarin derivatives. In alcohol-water, and at pH = 5, and an excess of alizarin complexone, there is produced a complex, in the ratio of 11, which absorbs at 480 nm. The molar extinction coefficient is 4.689 and the K_f = 2,51 · 10⁵. The method was employed in the analysis of a specimen of a steel, whereby the interfering elements were separated off by paper Chromatographic means.

     

The reaction of lithium trialkylalkynylborates with oxiranes : γ-Hydroxyketone synthesis and stereoselective preparation of trisubstituted ethylenes

Lithium trialkylalkynylborates (1) react with oxiranes (2) to give non-isolable intermediates 3 which subsequently afford either γ-hydroxyketones 5, trisubstituted ethylenes of homoallylic alcohol type 6 or a tetrasubstituted ethylene 7 upon appropriate treatment with NaOH/H₂O₂, AcOH or NaOH/I₂, respectively. The reaction of oxiranes with 1 proceeds in high regioselectivity and the resulting homoallylic alcohols 6 are of nearly 100% (E) configuration. A straight chain γ-hydroxyketone 16 is obtained in the reaction of methyloxirane with the ate-complex (1), which has been prepared from lithium acetylide ethylenediamine complex and trihexylborane.     

Cationic polymerization of vinyl monomers initiated by phosphorus compounds containing halogens

Polymerization of vinyl monomers having large negative e values in the presence of phosphorus compounds containing halogens was studied in order to examine the cationic initiation ability of phosphorus compounds. N-Vinylcarbazole was effectively polymerized by phosphorus compounds such as PCI₃, PBr₃, PCI₂C₆H₅, PCI(C₆H₅)₂, POCI₃, and POCI₂C₆H₅ even in benzene. The initiation ability of phosphorus compounds decreased in the order; PCI₂ ? PBr₃ > PCI₂C₆H₅ > PCI(C₆H₅)₂, and also POCI₃ > POCI₂₆₅. On the other hand, PCI₃ and PBr₃, which were less effective than POCI₃, showed initiation ability for the polymerizations of styrene and α-methylstyrene in nitrobenzene as a solvent. The results of the copolymerization of styrene with methyl methacrylate by PCI₃ in nitrobenzene, the result of solvent dielectric constant effect, and the effect of additives such as water, tert-butyl chloride, triethylamine, and hydroquinone, indicate the polymerization of styrene by PCI₃ to proceed by a cationic mechanism.     

Photochemical polar addition of trialkylboranes

cis-2-Alkylcyclohexanols are obtained stereoselectively upon irradiation of a mixture of cyclohexene and the corresponding trialkylborane in the presence of p-xylene as a sensitizer and upon the successive oxidation of the photolysate with alkaline H₂O₂. The similar reaction of 1-ethylcyclohexene yields 2,2-dialkylcyclohexanols. Cycloheptene also reacts with the boranes to afford cis-2-alkylcycloheptanols. These reactions are explained by assuming the highly strained trans-cyclohexene or -heptene to be the reactive species. Photochemically produced trans-cyclo-oct-2-enone and cis,trans-cyclo-octa-2,7-dienone react thermally with the bora e to give 3-alkylcyclo-octanone and cis-7-alkylcyclo-oct-2-enone, respectively. Photoreactions of acridine with the boranes result in reductive alkylation, affording 9-alkylacridans in fairly good yields.     

General synthesis of sugar-pendant 1,3-propanediamines containing a C-glycoside linkage

A straightforward route to C-glycoside linked sugar-pendant 1,3-propanediamines is described. The three-step preparation procedure involves (1) C-glycosylation of an OH-protected α-glycosyl halide with malononitrile, (2) catalytic hydrogenation of the nitriles to amines, and (3) deprotection of acetyl groups via acid-catalyzed hydrolysis. In the case of the galactose derivative, excess sodiomalononitrile promotes the second addition of a carbanion in the first step. The β-anomeric configuration was confirmed by X-ray crystallography of the glycosylated intermediates. This method demonstrates a general method to access a new class of carbohydrate-pendant C-glycoside chelators.     

Nature of the active component in the catalytic system prepared from titanium(III) chloride(AA), ethylaluminum dichloride,and tetrakis(dimethylamino)silane,in the polymerization of propylene

The chemistry of the titanium(III) chloride(AA)–ethylaluminum dichloride–tetrakis-(dimethylamino)silane system for the polymerization of propylene was studied. A complex of ethylaluminum dichloride with tetrakis(dimethylamino)silane was isolated. It was shown that this complex contains ethylaluminum dichloride and tetrakis(dimethylamino)silane in the ratio of 2:1. This complex with titanium(III) chloride is responsible for the polymerization activity.     

Polymerization of vinyl monomers by the reaction products of diphenyl sulphoxide with potassium

Diphenyl sulphoxide (DPSO) reacts with an equimolar amount of potassium (K) in tetrahydrofuran (THF) at ?78° to form a reddish-black solution, giving an electron spin resonance (ESR) signal only below ?70°. The signal is attributed to a very labile DPSO anion radical. The solution of DPSO-K (1/1) reaction products reacts further with another molecular amount of K at this temperature to give no ESR signal. The DPSO-K (1/1) reaction products initiates the polymerization of acrylonitrile (AN), but not the polymerizations of methyl methacrylate (MMA), styrene (St) or isoprene (IP). The active species of the solution initiating the polymerization of AN is assumed to be potassium benzene sulphenate from analyses of the solution and the infra-red spectrum of AN oligomers obtained using the complex. The DPSO-K (1/2) reaction products solution initiates the polymerization of MMA, St and IP as well as AN. The active species initiating the polymerization of MMA, St or IP is assumed to be phenylpotassium.