Properties of χ-alumina as related to catalysis

-Alumina was synthesized by thermal decomposition of aluminium(III) isopropoxide, and its properties were investigated. The change in its surface area with increasing calcination temperature resembled that of -alumina. Both aluminas had the same acid strength, and their activities in isomerization of 1-butene were the same. -Alumina as a support for molybdenum catalyst in the epoxidation of allyl alcohol also behavedin the same manner as -alumina. Thus -alumina has almost the same catalytic properties as -alumina.     

Reaction of poly(vinyl chloride) with magnesium and grignard reagents

Reaction of poly(vinyl chloride) with magnesium under various conditions was attempted, but poly(vinyl chloride) did not react with magnesium. The reactions of poly(vinyl chloride) with benzylmagnesium chloride and allylmagnesium chloride as Grignard reagents were carried out in tetrahydrofuran at reflux temperature. It was found that the chlorine atoms in the poly(vinyl chloride) were replaced by benzyl and allyl groups by the coupling reaction, and a small amount of Grignard reagent of poly(vinyl chloride) was formed by the magnesium–halogen exchange reaction. The extent of the substitution increased with increasing reaction time and concentration of the Grignard reagent.     

Retronasal Aroma of Beef Pate Analyzed by a Chewing Simulator

In retronasal aroma, the targeted aroma compounds are released from food during chewing. The changes in the food structures during chewing strongly influence the release of the compounds, therefore affecting the perception of food. Here, the relationship between retronasal aroma and food deliciousness based on the physicochemical properties of aroma compounds was examined. We considered the consumption of solid foods and the effect of oral parameters in elderly people. Beef pate was used as a model food sample to study the effect of the release of aroma compounds under controlled in vitro mastication and salivation conditions using a chewing simulator. We identified the effects of coexisting ingredients such as beef fat on the time course behavior of the release of aroma compounds. In particular, the release of the middle types of aromas was significantly faster with stronger chewing force, and higher with a high fat content of the sample. In addition, a larger release intensity was observed when soy proteins were partially substituted for beef proteins. Using an appropriate model saliva, a change in the salting-out effect from the saliva composition was found to be a factor, which could explain the lowering of aroma sensation in an elderly person.     

Positive solutions for (n−1,1) three-point boundary value problems with coefficient that changes sign

In this paper, we establish existence results for positive solutions for the (n−1,1) three-point boundary value problems consisting of the equation

     

Limit theorems for trimmed sums

This paper studies the heavily trimmed sums (*) _{[ns] + 1} ^[nt] X _j ⁽ⁿ⁾ , where {X _j ⁽ⁿ⁾ } _{j = 1} ⁿ are the order statistics from independent random variables {X ₁,...,X _n } having a common distributionF. The main theorem gives the limiting process of (*) as a process oft. More smoothly trimmed sums like _{j = 1} ^[nt] J(j/n)X _j ⁽ⁿ⁾ are also discussed.     

Raman probe using a single hollow waveguide

A simple Raman probe was realized using a single flexible hollow waveguide (HW). A HW coated with a silver film, which had reasonable transmission and little optical background noise, was used as a bidirectional transmission fiber for both the excitation and collection of Raman scattered light. The HW itself generated no Raman scattering or fluorescence noise during transmission. A complex filtering system at the end of the waveguide was thus unnecessary. In addition, the measured Raman spectra showed better signal-to-noise ratios than a conventional Raman fiber probe. The HW's suitability as a Raman fiber probe was also demonstrated.     

Oblique-Incidence Characteristics of a Parallel-Aligned Nematic-Liquid-Crystal Spatial Light Modulator

We have developed optically-addressed and electrically-addressed liquid crystal spatial phase-only light modulators having no pixelized structures. We obtained a large depth of phase-only modulation and high diffraction efficiency based on the electro-optical characteristics of a parallel-aligned nematic liquid crystal. These spatial light modulators (SLM) are of the reflection type, so there would be a loss of power in the readout light from the half mirror, which was set up so as to separate the incident and reflected lights. To optimize the characteristics of a reflection type spatial phase-only light modulator, we have proposed an oblique incident optical readout setup. We have examined the effect of conditions such as the polarization direction and the incidence angle of the readout light, and the orientation of liquid crystal molecules in the SLM. High diffraction efficiency close to the theoretical maximum value was obtained by adjusting the above conditions. The simulation analysis can well explain the experimental results of phase modulation.     

Site selection NMR study on electronic state in and near vortex core of YBa2Cu4O8

We report a site-selective ¹⁷O spin-lattice relaxation rate T₁⁻¹ in the vortex state of YBa₂Cu₄O₈. We found that T₁⁻¹ at the planar sites exhibits an unusual nonmonotonic NMR frequency dependence. Based on T₁⁻¹ in the vortex core region, we establish strong evidence that the local density of states within the vortex core is strongly reduced.     

Anomalous heat evolution of deuteron implanted al upon electron bombardment III - try to observe the nuclear d-d reaction

In previous papers, one of the authors (K. K.) has observed the anomalous melting of the surface layer of deuteron implanted Al, containing so-called "tunnel structures", on the electron bombardment in transmission electron microscope. In the present paper, we intended to observe the evidence of the d-d nuclear reaction, expecting neutron emission, associated with the melting phenomenon. However, the result was rather unexpected. The melting phenomenon was certainly observed under the same experimental conditions as before. But, in spite of the melting, neutron emission associated with the nuclear reaction was not observed. And, more unexpectedly, X-ray emission of energy less than roughly 400 v keV was observed when specimens with a bubble structure, which never showed melting, were bombarded with electron beams. Several conceivable mechanisms are discussed which, however, are all not convincing to explain the melting. The melting is attributed to some excess energy generation. The error estimation of the radiation measurements was undertaken.     

The electronic structures of cis-polyacetylene

The electronic structures of two possible forms of the so-called $\text{cis}$-skeletal polyacetylene ($\text{cis}$-polyacetylene) are investigated on the basis of the tight-binding LCAO-SCF-MO method under the CNDO/2 version. The analyses of the total energies per unit cell, the π bond orders and the interatomic interaction energies as to the both forms predict the $\text{cis}$-transoid backbone for the $\text{cis}$-polyacetylene. The examination of the patterns of particular molecular orbitals of the hypothetical $\text{cis}$-polymer with equal C-C bond lengths also supports the $\text{cis}$-transoid form.