Structural conformation of biomolecules released from temperature-sensitive composite polymer particles – a study by circular dichroism

A conformational study of the biomolecules released from submicron- and micron-sized temperature-sensitive composite polymer particles by decreasing the temperature from 40 to 25 °C was done with circular dichroism and the results were compared with those of the native biomolecules. In almost all cases the biomolecules released retained their native conformational states. Received: 10 April 2001 Accepted: 13 June 2001     

Preparation of Titania Nanosheet-Precipitated Coatings on Glass Substrates by Treating SiO2-TiO2 Gel Films with Hot Water Under Vibrations

Titania nanosheet-precipitated coatings have been prepared by treating SiO₂-TiO₂ gel films on glass substrates with hot water at 90°C under vibration. Longitudinal vibrations at about 6 Hz during the treatment enhanced the formation of titania nanosheet. The titania nanosheet consisted of several layers with a spacing of about 0.6 nm and was identified as hydrated titania with a lepidocrocite-type structure. The morphology of the titania nanosheet-precipitated coatings is probably achieved by lowering of the concentration of hydrolyzed titania species at the surface due to rapid water flow driven by the vibrations. The coatings were transparent in the visible range and showed high photocatalytic activity and antifogging property.     

Phase-transfer behavior of cross-linked poly(acrylic acid) particles prepared by dispersion polymerization from ionic liquid to water

The phase-transfer behavior of poly(acrylic acid) (PAA) particles from the hydrophobic ionic liquid N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)amide phase to the water phase in the particle state, which we reported previously, was examined in more detail. PAA particles were prepared in the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([Bmim][TFSA]) and the organic solvent chloroform and were extracted. The transfer of PAA particles to water in the particle state was also observed in [Bmim][TFSA] systems. In contrast, the transfer phenomenon was not observed in the chloroform system. It was clarified that water/oil interfacial tension γ(wo) is an important parameter in the extraction of PAA in the particle state from the viewpoint of free energy. When the cationic surfactant tetradecyltrimethylammonium bromide, aqueous solution was used as the extraction medium, the PAA particles were extracted in the particle state from chloroform to water, in which γ(wo) became as low as that of the ionic liquid. This suggests that the phase-transfer phenomenon of PAA particles in the particle state was induced by the ionic liquid's unique property of low interfacial tension with water despite its high hydrophobic character.     

Copper-catalyzed coupling of aryl halides and nitrite salts: a mild Ullmann-type synthesis of aromatic nitro compounds

Nitration of aromatic halides proceeded smoothly in the presence of catalytic amounts of Cu bronze and N,N′-dimethylethylenediamine. Sodium nitrite-18-crown-6, or tetra-n-butylammonium nitrite (n-Bu₄NNO₂) turned out to be efficient nitrating agents. The aromatic nitro compounds were synthesized under essentially neutral conditions.     

A new memory effect: smectic liquid crystalline memory having both conductive and optical memory

In order to compensate for light leakage in the oblique viewing directions of the dark state of the horizontal-switching mode such as the in-plane switching and fringe field switching modes. The viewing angle performance of the horizontal-switching mode with an compensation film has been evaluated on a case by case basis according to the retardation values of the films. Consequently, we found that a much better dark state can be achieved by using an optimised compensation film.     

Ni-catalyzed α-arylation of secondary α-bromo-α-fluoro-β-lactam: cross-coupling of a secondary fluorine-containing electrophile

A highly diastereoselective cross-coupling reaction of an α-bromo-α-fluoro-β-lactam with a wide range of aryl Grignard reagents was catalyzed by Ni/bis(oxazoline) in yields of up to 98%. The product was obtained diastereoselectively as an anti-isomer. This is the first successful α-arylation of an α-fluoro-β-lactam to produce diverse α-aryl-α-fluoro-β-lactams.     

New aplysiatoxin derivatives from the Okinawan cyanobacterium Moorea producens

The marine cyanobacterium Moorea producens is a rich source of diverse compounds that possess a variety of biological activities. In the present study, eight new aplysiatoxin derivatives, namely 6, 8–13, and 15, along with aplysiatoxin (1), debromoaplysiatoxin (2), 3-methoxyaplysiatoxin (3), anhydroaplysiatoxin (4), anhydrodebromoaplysiatoxin (5), oscillatoxin B2 (7), and 30-methyloscillatoxin D (14) were isolated and identified from the Okinawan M. producens. In cytotoxicity and diatom growth inhibition tests, the fifteen compounds tested (1–15) showed moderate or no activity at a concentration of 10?μg/mL.     

Highly oriented growth of titanate nanotubes (TNTs) in micro and confinement spaces on sol–gel derived amorphous TiO2 thin films under moderate hydrothermal condition

Synthesis of titanate nanotubes (TNTs) from sol–gel derived amorphous TiO₂ thin films under moderate hydrothermal condition has been reported. TNTs from film possess a tubular morphology that is the same crystalline phase as one synthesized from TiO₂ powder so far. TNTs obtained in this study are not entangled one another but oriented and isolated on the substrate. Growth of highly oriented TNTs is observed in micro grooves of amorphous TiO₂ thin film. Their orientation is also maintained with the growth of TNTs.     

Leveraging Material Properties in Fluorescence Anion Sensor Arrays: A General Approach

As the demand for probes suitable for sensor development increases, investigation of approaches that utilize known successful receptors gains in general importance. This study describes a two‐prong approach that can be used as a guide to developing sensors from known receptors. First, the conversion of a simple receptor, calix[4]pyrrole, into a fluorescent probe to establish a ratiometric signal is described. Secondly, the sensors that employ an output from a single ratiometric calix[4]pyrrole probe are fabricated by using poly(ether‐urethane) hydrogel copolymers. These hydrogels are designed to absorb, internalize and transport aqueous electrolytes. A sensor array of ten different poly(ether‐urethane) matrices with varying comonomer proportions were doped with a single probe and were exposed to eight different anions: acetate, benzoate, fluoride, chloride, phosphate, pyrophosphate, hydrogen sulfide, and cyanide, eight urine samples and anti‐inflammatory drugs (NSAIDs). The poly(ether‐urethane) matrices comprise different proportions of anion‐binding urethane moieties and different hydrophilicity given by the ratio between ethylene glycol ether and butylene glycol ether. This diversity in the hydration behavior provides different environment polarity, in which the recognition and self‐assembly processes display enough diverse behavior to allow for unique response of the probe to the analytes. Furthermore, a single probe is shown to recognize eight different aqueous anions and eight urine samples when embedded in ten different polyurethanes in an array that displays 100 % classification accuracy. To demonstrate the potential of the concept for quantitative studies, an estimation of non‐steroidal anti‐inflammatory drugs ibuprofen and diclofenac in water and in saliva was performed. A limit of detection of 0.1 ppm and a dynamic range of 0.1–0.6 and 0.05–60 ppm was observed, respectively. Given the general difficulty of chemosensors to recognize aqueous anions, the fact that one probe recognizes eight different analytes attests to an enormous effect of the polymer environment on the recognition process. This method could be used to generate a variety of sensor arrays for various analyses including species that are difficult to recognize, such as small‐molecule‐ and inorganic anions.     

Concentration dependences of dielectric properties at 105 Hz and 106 Hz for aqueous solutions of hydroxypropyl cellulose

The concentration dependences of dielectric properties measured at 10⁵ Hz and 10⁶ Hz are reported for aqueous solutions of hydroxypropyl cellulose. Phase behaviour of the solutions was also observed with a polarizing optical microscope. For solutions with concentrations well above 40 wt %, polydomain textures, including the banded texture, were observed after a prehistory of deformation. No significant discontinuous changes in the dielectric constant, ε_r′, and loss factor, ε_r″, were found at the concentrations around the onset of the isotropic–cholesteric phase transition and in the biphasic region. In contrast, the steeper changes in ε_r′ and ε_r″ were found at the critical concentration for the fully developed cholesteric phase transition with the polydomain textures.