Evaluation of Photocatalytic Activity of Transparent Anatase Nanocrystals-Dispersed Silica Films Prepared by the Sol-Gel Process with Hot Water Treatment

Anatase nanocrystals were precipitated mainly at the surface of the silica-titania gel films with hot water treatment, whereas the addition of poly(ethylene glycol) (PEG) in the films led to the dispersion of anatase nanocrystals in the whole of the films after the treatment. Both films with and without PEG showed high photocatalytic activities for acetaldehyde, NO _x and stearic acid in the gas-solid system, and for methylene blue and potassium iodide in the liquid-solid system. The addition of PEG improved the photocatalytic activities of the resultant films due to the smaller anatase crystallites and the porous film structure. The residual silica under-layer of the superficially anatase-precipitated films is expected to act as a protective one for an organic polymer substrate against the photocatalytic degradation.     

Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

Preparation of Titania Nanosheet-Precipitated Coatings on Glass Substrates by Treating SiO2-TiO2 Gel Films with Hot Water Under Vibrations

Titania nanosheet-precipitated coatings have been prepared by treating SiO₂-TiO₂ gel films on glass substrates with hot water at 90°C under vibration. Longitudinal vibrations at about 6 Hz during the treatment enhanced the formation of titania nanosheet. The titania nanosheet consisted of several layers with a spacing of about 0.6 nm and was identified as hydrated titania with a lepidocrocite-type structure. The morphology of the titania nanosheet-precipitated coatings is probably achieved by lowering of the concentration of hydrolyzed titania species at the surface due to rapid water flow driven by the vibrations. The coatings were transparent in the visible range and showed high photocatalytic activity and antifogging property.     

Palladium-catalyzed oxidation of alcohols via their allyl carbonates under neutral conditions

Treatment of alkyl allyl carbonates derived from various alcohols with a palladium catalyst in MeCN affords ketones and aldehydes in high yields. This new method of oxidation of alcohols can be applied to various alcohols except simple primary alcohols.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

Palladium-catalyzed reaction of allyl carbamates; allylation of carbonucleophiles,and protection-deprotection of amines

Allylation of carbonucleophiles with allylic carbamates under neutral conditions has been studied. The C-allylation of carbonucleophile is competitive with the N-allylation of amines, and the structure of amines is crucial for the selectivity. Bulky secondary amines gave the best results. Also a new method of protection-deprotection of amines as carbamates has been developed. Smooth deprotection is possible by the palladium-catalyzed reaction of allyl carbamates with formic acid. This method is particulary useful for primary amines, including optically active amino acids.     

Near-infrared fluorescent probes: a next-generation tool for protein-labeling applications

The development of near-infrared (NIR) fluorescent probes over the past few decades has changed the way that biomolecules are imaged, and thus represents one of the most rapidly progressing areas of research. Presently, NIR fluorescent probes are routinely used to visualize and understand intracellular activities. The ability to penetrate tissues deeply, reduced photodamage to living organisms, and a high signal-to-noise ratio characterize NIR fluorescent probes as efficient next-generation tools for elucidating various biological events. The coupling of self-labeling protein tags with synthetic fluorescent probes is one of the most promising research areas in chemical biology. Indeed, at present, protein-labeling techniques are not only used to monitor the dynamics and localization of proteins but also play a more diverse role in imaging applications. For instance, one of the dominant technologies employed in the visualization of protein activity and regulation is based on protein tags and their associated NIR fluorescent probes. In this mini-review, we will discuss the development of several NIR fluorescent probes used for various protein-tag systems.

This minireview describes the development of NIR chemical probes for various protein-tag systems.     

Copper-catalyzed coupling of aryl halides and nitrite salts: a mild Ullmann-type synthesis of aromatic nitro compounds

Nitration of aromatic halides proceeded smoothly in the presence of catalytic amounts of Cu bronze and N,N′-dimethylethylenediamine. Sodium nitrite-18-crown-6, or tetra-n-butylammonium nitrite (n-Bu₄NNO₂) turned out to be efficient nitrating agents. The aromatic nitro compounds were synthesized under essentially neutral conditions.     

Synthesis of dehydroxy-trans-resorcylide by intramolecular alkylation of the protected cyanohydrin using a butadiene telomer as a building block

Dehydrroxy-trans-resorcylide ($\text{15}$) was synthesized by efficient intramolecular alkylation of the protected cyanohydrin. The butadiene telomer obtained by the palladium catalyzed reaction of butadiene with acetic acid was used as a suitable block of the carbocycle.