Intrinsic carrier doping in antiferromagnetically interacted supramolecular copper complexes with (pyrazino)tetrathiafulvalene (pyra-TTF) as the ligand, [CuIICl2(pyra-TTF)] and (pyra-TTF)2[CuI3Cl4(pyra-TTF)

New supramolecular copper complexes with pyrazinotetrathiafulvalene (pyra-TTF) as the ligand, [Cu(II)Cl2(pyra-TTF)] (1) and (pyra-TTF) 2[Cu(I)3Cl4(pyra-TTF)] (2), have been synthesized by the diffusion method. Complex 1 is a black block crystal with a three-dimensional (3-D) supramolecular network; the linear chain [-Cu(II)Cl2-(pyra-TTF)-] n extends along the b axis, where the coordinated pyra-TTF donors are stacked in a head-to-tail and ring-over-bond configuration to construct two-dimensional (2-D) sheets, and between the sheets, there are C...Cl(-) or H...Cl(-) contacts. Even though the electron spin resonance (ESR) measurement reveals the nearly Cu(II) state, complex 1 is a semiconductor with sigmaRT=1.0 x 10(-4) S cm(-1) and Ea=0.33 eV. The high-frequency conductivity measurement also confirmed the intrinsic slight carrier doping from Cu(II) to the pyra-TTF donor. This slight doping enhances not only the real and imaginary dielectric constants but also the antiferromagnetic interaction between Cu(II) spins following the 2-D Heisenberg model with 2J=-20 K. In contrast, complex 2 is a very thin black needle. This needle crystal has two crystallographically independent pyra-TTF molecules, which are coordinated and noncoordinated donors. The coordinated donors composed a supramolecular chain [Cu(I)3Cl4(pyra-TTF)(0)]n , whereas the noncoordinated donors formed conducting alpha'-type pyra-TTF(+0.5) sheets. This complex is semiconducting with sigmaRT=0.1 S cm(-1) and Ea=0.15 eV. Both complexes 1 and 2 demonstrate that the pyra-TTF molecule works not only as an oxidized donor by Cu(II) to construct conducting sheets but also as a ligand coordinated to a Cu cation to form supramolecuar chains.     

Anti-babesial compounds from Curcuma xanthorrhiza

Anti-babesial ingredients, (12R)- and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols, were isolated from Curcuma xanthorrhiza. The structures were established by the extensive NMR techniques. The assignments of (1)H NMR data of (12R)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was revised, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was isolated as a pure form for the first time. The IC(50) of the active compounds were compared with that of commercial drug, diminazene aceturate (Ganaseg). IC(50) values of Ganaseg, (12R)-, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols were 0.6 microg mL(-1), 8.3 microg mL(-1) and 11.6 microg mL(-1), respectively.     

Effective 2,6-substitution of piperidine nitroxyl radical by carbonyl compound

Nitroxyl radicals (nitroxides) with unpaired electron are widely used as antioxidants, contrast agents, and spin probes. Although piperidine nitroxyl radicals have many applications, these are mainly tetramethylpiperidine compounds, and only a few reports consider the substitution of N-O surround as a reaction site, such as 2,2,6,6-tetrasubstituted piperidine nitroxyl radicals. Our results revealed that the 2,6-position of the 2,2,6,6-tetramethylpiperidin-4-one compound was substituted by cyclohexyl groups to produce 2,2,6,6-tetrasubstituted piperidin-4-one derivatives under mild reaction conditions. An interesting result was obtained by using ¹⁵N-labeled NH₄Cl instead of ¹⁴NH₄Cl: it gave ¹⁵N-labeled 2,2,6,6-tetrasubstituted piperidin-4-one-1-oxyls with a high ¹⁵N content. In conclusion, the new method for the synthesis of nitroxyl radicals readily yields 2,2,6,6-tetrasubstituted piperidin-4-one under mild conditions.     

Oxidation of Au by surface OH: nucleation and electronic structure of gold on hydroxylated MgO(001)

The nucleation and electronic structure of vapor-deposited Au on hydroxylated MgO(001) surfaces has been investigated under ultrahigh vacuum conditions. Hydroxylated MgO(001) surfaces with two different hydroxyl coverages, 0.4 and 1 monolayer, respectively, were prepared by exposure to water (D(2)O) at room temperature. Scanning tunneling microscopy experiments show significantly higher gold particle densities and smaller particle sizes on the hydroxylated MgO surface as compared to gold deposited on clean MgO(001). Infrared spectroscopy and X-ray photoelectron spectroscopy experiments were performed to reveal details about the initial nucleation of gold. Gold atoms are found to chemically interact with a specific type of hydroxyl groups on the MgO surface, leading to the formation of oxidized gold particles. The enhanced adhesion of Au particles, which is due to the formation of strong Au-O interfacial bonds, is responsible for the observed higher stability of small Au clusters toward thermal sintering on hydroxylated MgO surfaces. The results are compared to similar studies on Au/TiO(2)(110) model systems and powder samples prepared by the deposition-precipitation route.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

Selective adsorption and stable solidification of radioactive cesium ions by porous silica gels loaded with insoluble ferrocyanides

Development of highly functional cesium selective adsorbents for the decontamination of high-activity-level water(HALW) from the Fukushima NPP-1 accident is very urgent. In order to selectively adsorb the radioactive cesium, three kinds of novel porous silica gels loaded with insoluble ferrocyanides(SLFC) were prepared using a successive impregnation/precipitation method. Based on the results of previous research, the SLFC composites have relatively large uptake ratio above 95%, distribution coefficients(Kd) above 103 cm3/g, and excellent adsorption kinetics even in seawater. The solidification results also indicate that zeolites have an excellent Cs immobilization characteristic, gas-trapping and self-sintering abilities, and low leachability. We chose three kinds of SLFC composites to achieve the optimization of solidification by mixing with nine kinds of additives at high temperatures(up to 1200 °C). The Cs contents in the three composites were estimated to be below 30% of the initial contents and decreased with the three stages at calcination temperatures ranging from 25 to 1200 °C. By contrast, the Cs immobilization ratio was markedly lowered by mixing with additives: of those, allophane had the best immobilization result. By increasing the additive ratio to 50 wt%, the Cs immobilization ratio became almost 100% and no volatilization of Cs was detected even after calcination at 1200 °C. This result indicates that calcination of the mixture of SLFC composites after adsorbing Cs+ ions and specific additives under appropriate ratio is effective for stable solidification.     

Conformational analysis of N-aryl-N-(2-azulenyl)acetamides

Aromatic amides bearing 2-azulenyl group on the amide nitrogen were synthesized and their structures were investigated. The π-electron density of the N-aryl group was found to influence the cis-trans conformational preferences of these compounds in solution. X-ray crystallography revealed that the plane of the 2-azulenyl ring has a strong tendency to lie coplanar with the amide plane when the azulene group is located on the same side as the amide oxygen atom.     

Peptidehelicenes in solution and gel: chiral discrimination through interactions between two types of helixes

Helical [5]thiaheterohelicene 5HM, which rapidly interconverts between P and M enantiomers in solution, was connected to helical l-phenylalanine oligomers with an ester linkage to give peptidehelicenes (5Fn, where n: number of bonded phenylalanines). The characteristics of 5F4 and 5F5 with two types of helixes in a molecule were investigated, particularly in comparison with those of 5F1–5F3 with an incomplete coil of a peptide moiety. l-Phenylalanine peptide chains induced a shift in the equilibrium between the P and M helixes of 5HM toward the P side for all the 5Fns examined. The enantiomeric excess (ee) of the P form increased with a decrease in temperature, together with an elongation of the peptide chains. 5F4 and 5F5 in hot solutions of some solvents formed a gel at room temperature, whereas 5F1–5F3 showed no such behavior. In this gel, the stable helical form of the 5HM moiety in 5F4 and 5F5 was observed to be the M form in contrast to that in their solutions.     

An “OFF–ON–OFF” fluorescence protein-labeling probe for real-time visualization of the degradation of short-lived proteins in cellular systems

The ability to monitor proteolytic pathways that remove unwanted and damaged proteins from cells is essential for understanding the multiple processes used to maintain cellular homeostasis. In this study, we have developed a new protein-labeling probe that employs an ‘OFF–ON–OFF’ fluorescence switch to enable real-time imaging of the expression (fluorescence ON) and degradation (fluorescence OFF) of PYP-tagged protein constructs in living cells. Fluorescence switching is modulated by intramolecular contact quenching interactions in the unbound probe (fluorescence OFF) being disrupted upon binding to the PYP-tag protein, which turns fluorescence ON. Quenching is then restored when the PYP-tag–probe complex undergoes proteolytic degradation, which results in fluorescence being turned OFF. Optimization of probe structures and PYP-tag mutants has enabled this fast reacting ‘OFF–ON–OFF’ probe to be used to fluorescently image the expression and degradation of short-lived proteins.

An “OFF–ON–OFF” fluorescence probe for real-time imaging of the expression (fluorescence ‘OFF’) and degradation (fluorescence ‘ON’) of short lived PYP-tag proteins in cellular systems.