A practical synthesis of 4′-thioribonucleosides

A practical synthesis of 4′-thioribonucleosides starting from inexpensive l-arabinose is described. 1,4-Anhydro-2,3-O-isopropylidene-4-thioribitol, which was prepared by using a novel reductive ring-contraction reaction, was converted to the 5-O-silylated sulfoxides. The Pummerer-type thioglycosylation of the sulfoxides gave the 4′-thioribonucleosides stereoselectively.     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Phase relations in NaxCrxTi8−xO16 at 1350 °C and crystal structure of hollandite-like Na2Cr2Ti6O16

Phase relations of rutile, freudenbergite, and hollandite structures were examined in the pseudobinary system NaCrO₂-TiO₂ (i.e., Na_xCr_xTi_8−xO₁₆) at 1350 °C. The hollandite structure was obtained in the composition range 1.7?x?2.0. The symmetry of the samples at room temperature was tetragonal for x=1.7 and 1.75, and monoclinic for x=1.8 and above. Single crystals of monoclinic hollandite Na₂Cr₂Ti₆O₁₆ were grown and the structure refinement has been carried out using an X-ray diffraction technique. The space group was I2/m and cell parameters were a=10.2385(11), b=2.9559(9), c=9.9097(11)Å, and β=90.545(9)° with Z=1. The Na ion distribution in the tunnel was markedly deformed from that in the tetragonal form. It was suggested that Cr/Ti ratios were different between the two framework metal sites.     

Epitaxial Growth of Sr x Ba1 − x Nb2O6 Thin Films Prepared from Sol-Gel Process

In this study, we prepared Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) thin film on 0.75 wt% La doped SrTiO₃ (100) and (110) single crystal substrates. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)₅ as raw materials, and acetic acid and diethlene glycol monomethyl ether as solvents. The substrates were coated with the solution by spin coating method. As-coated thin films were heated from 973 to 1273 K in air. The grains of the thin film on La doped SrTiO₃ (100) were pillar shaped and arranged in right angle to each other. On the other hand, the grains of these thin films on La doped SrTiO₃ were pillar shape and arranged in one direction. The crystallographic relationship of the thin film between Sr _x Ba_{1 – x} Nb₂O₆ and substrate that the 130 and 310 direction of the thin film on the substrate were oriented with c-axis in parallel to the substrate surface. On the other hand, (hk0) phase diffractions of Sr _x Ba_{1 – x} Nb₂O₆ thin film on the substrate (110) were investigated in the XRD theta-2theta measurement. It is expected that the Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) were highly oriented or epitaxial growing on La doped SrTiO₃ (110) single crystal substrate.     

m-Diethynylbenzene macrocycles: syntheses and self-association behavior in solution

m-Diethynylbenzene macrocycles (DBMs), buta-1,3-diyne-bridged [4(n)]metacyclophanes, have been synthesized and their self-association behaviors in solution were investigated. Cyclic tetramers, hexamers, and octamers of DBMs having exo-annular octyl, hexadecyl, and 3,6,9-trioxadecyl ester groups were prepared by intermolecular oxidative coupling of dimer units or intramolecular cyclization of the corresponding open-chain oligomers. The aggregation properties were investigated by two methods, the (1)H NMR spectra and the vapor pressure osmometry (VPO). Although some discrepancies were observed between the association constants obtained from the two methods, the qualitative view was consistent with each other. The analysis of self-aggregation by VPO revealed unique aggregation behavior of DBMs in acetone and toluene, which was not elucidated by the NMR method. Namely, the association constants for infinite association are several times larger than the dimerization constant, suggesting that the aggregation is enhanced by the formation of dimers (a nucleation mechanism). In polar solvents, DBMs aggregate more strongly than in chloroform due to the solvophobic interactions between the macrocyclic framework and the solvents. Moreover, DBMs self-associate in aromatic solvents such as toluene and o-xylene more readily than in chloroform. In particular, the hexameric DBM having a large macrocyclic cavity exhibits extremely large association constants in aromatic solvents. By comparing the aggregation properties of DBMs with the corresponding acyclic oligomers, the effect of the macrocyclic structure on the aggregation propensity was clarified. Finally, it turned out that DBMs tend to aggregate more readily than the corresponding phenylacetylene macrocycles, acetylene-bridged [2(n)]metacyclophanes, owing to the withdrawal of the electron density from the aromatic rings by the butadiyne linkages which facilitates pi-pi stacking interactions.     

Installation of carbon chain onto 2-cyclohexene-1,4-diol monoacetate

Alkylation of cyclohexenyl monoacetate 1 with R₂Cu(CN)(MgCl)₂ or RMgBr/CuCN (cat.) in Et₂O produced trans 1,2-isomers 4, while arylation and alkenylation of 1 was accomplished with lithium borates 5 and a nickel cat. to afford trans 1,4-isomers 3 selectively. Furthermore, several transformations of the products were carried out to demonstrate synthetic advantages of the present reactions.     

Thalidomide as a nitric oxide synthase inhibitor and its structural development

Thalidomide has been found to exhibit weak nitric oxide synthase (NOS)-inhibitory activity. Structural development studies of thalidomide showed that some N-2,6-dimethylphenylhomophthalimide analogs possess NOS-inhibiting activity.     

Motor protein nano-biomachine powered by self-supplying ATP

A new nano-biomachine has been created from microtubules (MTs) and hetero-bifunctional polymer particles bearing pyruvate kinase, which is propelled on glass surfaces coated with kinesin by use of self-supplying ATP.     

PEGylated polyplex micelles from triblock catiomers with spatially ordered layering of condensed pDNA and buffering units for enhanced intracellular gene delivery

An A-B-C type triblock copolymer, tandemly aligning two types of polycations with different pKa values in a single polymer strand, was developed for the construction of novel polyplex micelles, satisfying a high DNA condensing ability as well as a proton buffering activity directed to elevating gene transfection. The micelle might feature the distinctive three-layered structure, where an inner polyplex layer of condensed pDNA with poly(l-lysine) (pKa approximately 9.4) as the C segment is successively wrapped with an intermediate layer of poly[(3-morpholinopropyl)aspartamide] (B segment) with a comparatively low pKa of approximately 6.2, to provide a buffering effect, and an outer PEG layer (A segment) as a biocompatible palisade.     

Triple hydrogen bonds direct crystal engineering of metal-assembled complexes: the effect of a novel organic-inorganic module on supramolecular structure

Novel triply hydrogen bonded suprastructures based on [M(tdpd)2(L)2]2- (H2tdpd=1,4,5,6-tetrahydro-5,6-dioxo-2,3-pyrazinedicarbonitrile, L=solvent) and melamine-analogous cations have been synthesized and characterized. The use of anions containing two AAA sets from [M(tdpd)2(L)2]2- together with cations containing one DDD set (A=hydrogen-bond acceptor, D=hydrogen-bond donor) leads to the formation of complementary triply hydrogen bonded modules in the solid state. In all cases, the building module is further extended via additional hydrogen-bonding interactions to produce a tape, and tapes are assembled into sheets. These results show that a hydrogen-bonded module consisting of different kinds of building blocks, one of which is a metal complex that includes hydrogen-bond acceptor sites and the other is a hydrogen-bond donor molecule, will be attractive for constructing metal-containing supramolecular systems by the self-assembly technique.