Hysteresis of ruby fluorescent line by pressure and annealing effect

Abstract

Accuracy of hydrostatic pressure measurement in a diamond-anvil cell (DAC) depends on the reproducibility of ruby RI fluorescent measurement. The larger scatter in R, fluorescent wavelength shift than the reproducibility of spectroscopic measurement was observed among appropriately mirror-finished ruby plates before setting up in DAC. The characteristics of the scatter changed after loading DAC up to pressure over hydrostatic limit. They vanished by annealing the ruby plates. These phenomena are presumably due to the appearance and disappearance of the residual stress in the ruby crystal. Such hysteresis of ruby fluorescent wavelength shift by pressure and its annealing effect are discussed.     

Nonlinear optical side‐chain polymers post‐functionalized with high‐β chromophores exhibiting large electro‐optic property

Electro‐optic side‐chain polymers have been synthesized by the post‐functionalization of methacrylate isocyanate polymers with novel phenyl vinylene thiophene vinylene bridge (FTC) nonlinear optical chromophores. For this application, FTC‐based chromophores were modified in their electronic donor structure, exhibiting much larger molecular hyperpolarizabilities compared with the benchmark FTC. Of these new chromophores, absorption spectra, hyper‐Rayleigh scattering experiment, and thermal analysis were carried out to confirm availability as effective nonlinear optical units for electro‐optic side‐chain polymers. The electro‐optic coefficients (r₃₃) of obtained polymers were investigated in the process of in situ poling by monitoring the temperature, current flow, poling field, and electro‐optic signal. Compared with the nonsubstituted analogue, benxyloxy modified FTC chromophore significantly achieved higher nonlinear optical property, exhibiting molecular hyperpolarizability at 1.9 μm of 4600 × 10^?30 esu and an r₃₃ value of 150 pm/V at the wavelength of 1.31 μm. Synthesized electro‐optic polymers showed high glass transition temperature (T_g), so that the temporal stability examination exhibited >78% of the electro‐optic intensity remaining at 85 °C over 500 h. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Numerical analysis of turbulent flow separation in a rectangular duct with a sharp 180‐degree turn by algebraic Reynolds stress model

Turbulent flow in a rectangular duct with a sharp 180‐degree turn is difficult to predict numerically because the flow behavior is influenced by several types of forces, including centrifugal force, pressure‐driven force, and shear stress generated by anisotropic turbulence. In particular, this type of flow is characterized by a large‐scale separated flow, and it is difficult to predict the reattachment point of a separated flow. Numerical analysis has been performed for a turbulent flow in a rectangular duct with a sharp 180‐degree turn using the algebraic Reynolds stress model. A boundary‐fitted coordinate system is introduced as a method for coordinate transformation to set the boundary conditions next to complicated shapes. The calculated results are compared with the experimental data, as measured by a laser‐Doppler anemometer, in order to examine the validity of the proposed numerical method and turbulent model. In addition, the possibility of improving the wall function method in the separated flow region is examined by replacing the log‐law velocity profile for a smooth wall with that for a rough wall. The analysis results indicated that the proposed algebraic Reynolds stress model can be used to reasonably predict the turbulent flow in a rectangular duct with a sharp 180‐degree turn. In particular, the calculated reattachment point of a separated flow, which is difficult to predict in a turbulent flow, agrees well with the experimental results. In addition, the calculation results suggest that the wall function method using the log‐law velocity profile for a rough wall over a separated flow region has some potential for improving the prediction accuracy. Copyright © 2007 John Wiley & Sons, Ltd.     

Classification Performance of a Low Pressure Differential Mobility Analyzer for Nanometer-sized Particles

Size distribution measurements and classification tests by a low pressure differential mobility analyzer (LPDMA) for nanometer-sized silver particles and cesium iodide particles under low pressure conditions (123–300 Torr) were performed using a transmission electron microscope (TEM) and the tandem DMA technique. When the ratio of the sheath gas flow rate and the aerosol gas flow rate was set at 5 : 1, the targeted sizes calculated from the classification voltage applied to the LPDMA at 160 Torr are found to be in good correlation with the count mean Feret diameter obtained from the TEM observation of the particles collected after a classification ranging from 6 to 25 nm, although the targeted sizes set by the LPDMA were approximately 15% greater than the count mean Feret diameter measured by the TEM after classification. The geometric standard deviations of DMA-classified particles measured by TEM and those obtained from the tandem DMA method ranged from 1.08 to 1.17 and from 1.05 to 1.13, respectively. They were slightly greater than the ideal geometric standard deviations (1.05) of the particles classified with the LPDMA, which was calculated by neglecting the broadening effects due to Brownian diffusion. We experimentally demonstrated the validity of our LPDMA system for size measurements and classification of the nanometer-sized particles under low pressure conditions.     

Application of a self-sensing conductive probe for Si device imaging

For the evaluation of two-dimensional carrier profiles in semiconductor devices, we have developed a novel form of probe–sensor combined unit that uses an etched tungsten wire as a conductive probe, and commercially available quartz tuning fork as the force sensor. This unit has a self-sensing capability due to the piezoelectric effect of quartz tuning fork, thus obviating optical setup, and its conductivity is higher and more stable than that of conventional metal-coated Si cantilever. In addition, this probe–sensor combined unit is inexpensive and easy to use, when compared to the well-known optical methods of Si-based cantilever vibration detection system. Our scanning probe microscope using this probe–sensor combined unit is able to mapping the capacitive gradient signal (dC/dZ image) and internal damping of quartz tuning fork oscillation (dissipation image) while scanning the sample surface. In this letter, we show the results of visualization of the p–n junction locus of a Si metal–oxide–semiconductor field effect transistor in both dC/dZ and dissipation images.