Photoinduced electron transfer in a hexaphenylbenzene-based self-assembled porphyrin-fullerene triad

A hexaphenylbenzene-based zinc porphyrin dyad forms a 1:1 complex with a fullerene bearing two pyridyl groups via coordination of the pyridyl nitrogens with the zinc atoms. The fullerene is symmetrically located between the two zinc porphyrins. The binding constant for the complex is 7.3 x 10(4) M(-1) in 1,2-difluorobenzene. Photoinduced electron transfer from a porphyrin first excited singlet state to the fullerene occurs with a time constant of 3 ps, and the resulting charge-separated state has a lifetime of 230 ps. This self-assembled construct should form a basis for the construction of more elaborate model photosynthetic antenna-reaction center systems.     

Characterization of amorphous hydrogenated carbon formed by low-pressure inductively coupled plasma enhanced chemical vapor deposition using multiple low-inductance antenna units

Three-dimensional plasma enhanced chemical vapor deposition (CVD) of hydrogenated amorphous carbon (a-C:H) has been demonstrated using a new type high-density volumetric plasma source with multiple low-inductance antenna system. The plasma density in the volume of phi 200 mm x 100 mm is 5.1 x 10(10) cm(-3) within +/-5% in the lateral directions and 5.2 x 10(10)cm(-3) within +/-10% in the axial direction for argon plasma under the pressure of 0.1 Pa and the total power as low as 400 W. The uniformity of the thickness and refractive index is within +/-3.5% and +/-1%, respectively, for the a-C:H films deposited on the substrates placed on the six side walls, the top of the phi 60 mm x 80 mm hexagonal substrate holder in the pure toluene plasma under the pressure is as low as 0.04 Pa, and the total power is as low as 300 W. It is also found that precisely controlled ion bombardment by pulse biasing led to the explicit observation in Raman and IR spectra of the transition from polymer-like structure to diamond-like structure accompanied by dehydrogenation due to ion bombardment. Moreover, it is also concluded that the pulse biasing technique is effective for stress reduction without a significant degradation of hardness. The stress of 0.6 GPa and the hardness of 15 GPa have been obtained for 2.0 microm thick films deposited with the optimized deposition conditions. The films are durable for the tribology test with a high load of 20 N up to more than 20,000 cycles, showing the specific wear rate and the friction coefficient were 1.2 x 10(-7) mm3/Nm and 0.04, respectively.     

Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.     

Crystal structure of cobalt molybdate hydrate CoMoO4·nH2O

We have determined the crystal structure of the title compound, which has a triclinic cell with cell parameters of , , , α=76.617°, β=84.188°, γ=74.510° and space group . The crystal structure suggests the chemical formula CoMoO₄·3/4H₂O. The structure consists of MoO₄ tetrahedra and CoO₆ octahedra, confirming the earlier X-ray absorption near-edge spectroscopic (XANES) investigation on the hydrate. The comparison of the crystal structures of the hydrate and the α-,β-, and hp-phases shows that the hydrate exhibits metal cation coordinations similar to those of the β-phase, but had arrangements of CoO₆ and MoO_n polyhedra similar to those of the hp-phase.     

Cyclopalladation of the indole ring in palladium(II) complexes of 2N1O-donor ligands and its dependence on the O-donor properties

Synthetic, structural, spectroscopic, and kinetic studies have been carried out on the Pd(II) complexes of new 2N1O-donor ligands containing a pendent indole, 3-(N-2-pyridylmethyl-N-2-hydroxy-5-methoxybenzylamino)ethylindole (HMeO-iepp), 3-(N-2-pyridylmethyl-N-2-hydroxy-5-nitrobenzylamino)ethylindole (HNO2-iepp), and (N-2-pyridylmethyl-3-indolylethylamino)acetic acid (Hiepc) (H denotes a dissociable proton). [Pd(MeO-iepp)Cl] (2), [Pd(NO2-iepp)Cl] (3), and [Pd(iepc)Cl] (4) were prepared and revealed by X-ray analysis to have a pyridine nitrogen, an amine nitrogen, a phenolate or carboxylate oxygen, and a chloride ion in the coordination plane. UV absorption and 1H NMR spectral changes indicated that all the complexes could be converted to the indole-binding complexes where the O donor was replaced by the indole C2 atom by cyclopalladation in DMSO or DMF in the temperature range of 40-60 degrees C. Formation of the indole-binding complex species obeyed the first-order kinetics, from which the activation parameters were estimated. The formation rate was dependent on the properties of the O-donor group, a lower pKa value of its conjugate acid causing faster conversion to the indole-binding species in the order 2 (methoxyphenolate) < 3 (nitrophenolate) < 4 (carboxylate). On the other hand, the ratio of the indole-binding complex to the O-donor complex as a result of the conversion was greater for the complexes with a higher pKa value of the ligand OH group, the order being 2 > 3 > 4.     

Optimal laser control of ultrafast photodissociation of I2- in water: mixed quantum/classical molecular dynamics simulation

A linearized optimal control method in combination with mixed quantum/classical molecular dynamics simulation is used for numerically investigating the possibility of controlling photodissociation wave packets of I(2)(-) in water. Optimal pulses are designed using an ensemble of photodissociation samples, aiming at the creation of localized dissociation wave packets. Numerical results clearly show the effectiveness of the control although the control achievement is reduced with an increase in the internuclear distance associated with a target region. We introduce effective optimal pulses that are designed using a statistically averaged effective dissociation potential, and show that they semiquantitatively reproduce the control achievements calculated by using optimal pulses. The control mechanisms are interpreted from the time- and frequency-resolved spectra of the effective optimal pulses.     

An intramolecular diels-alder approach to quassinoids—a stereoselective construction of a-aromatic klaineanone

Thermolysis of a benzocyclobutene derivative ($\text{20}$) prepared from norcamphor produced stereoselectively a tetracyclic compound ($\text{2}$), which was converted to a lactone ($\text{21}$) having correct stereochemistry at C₇, C₈, C₉, C₁₁, C₁₃, and C₁₄ positions of (±)-klaineanone.     

Comparison of total fluorine, extractable organic fluorine and perfluorinated compounds in the blood of wild and pefluorooctanoate (PFOA)-exposed rats: Evidence for the presence of other organofluorine compounds

The widespread occurrence and environmental persistence of perfluorinated compounds (PFCs) received worldwide attention recently. Exhaustive analysis of all fluorinated compounds in an environmental sample can be daunting because of the constraints in the availability of analytical standards and extraction methods. Combustion ion chromatographic technique for trace fluorine analysis was used to assess the concentrations of known PFCs (e.g., PFOS, PFOA) and total fluorine (TF) in the blood of wild rats collected from Japan. The technique was further validated using tissues from PFOA-exposed rats. Six PFCs (PFOS, PFOSA, PFUnDA, PFDA, PFNA, and PFOA) were detected in all of the wild rat blood samples. Concentrations of extractable organic fluorine (EOF) in fraction 1 (Fr1; MTBE extraction) of wild rats ranged 60.9-134 ng F mL⁻¹, while those in fraction 2 (Fr2; hexane) were below LOQ (32 ng F mL⁻¹); TF concentrations in the blood of wild rats ranged from 59.9-192 ng F mL⁻¹. The contribution of known PFCs in EOF-Fr1 (MTBE) varied from 9% to 89% (56% on average), and known PFC concentrations in TF content were less than 25%. In contrast, TF concentrations in the blood of PFOA-exposed rats ranged from 46900 to 111000 ng F mL⁻¹, with PFOA contributing over 90% of TF. A comparison of results from the samples analyzed in this study and the literature revealed three distinct groups with PFOA/known PFC and TF levels (i.e., wild rats and general population, occupationally exposed workers, and PFOA-exposed laboratory rats). The mass balance analysis of the different forms of fluorine in blood suggested the presence of other forms of organic fluorine in addition to known PFCs.     

Synthesis of 1-(5,6-dihydro-2H-thiopyran-2-yl)uracil by a Pummerer-type thioglycosylation reaction: the regioselectivity of allylic substitution

1-(5,6-Dihydro-2H-thiopyran-2-yl)uracil derivatives, a new 4′-thio-D4-nucleoside analogue, were synthesized by reacting 5,6-dihydro-2H-thiopyran sulfoxide and persilylated uracil in a Pummerer-type thioglycosylation reaction. The reaction of 5-alkyl substituted dihydrothiopyran sulfoxide 7 only gave 1-(dihydrothiopyran-2-yl)uracil 9. On the other hand, the reaction with a 5-siloxy substituted derivative of 7 resulted in a mixture of products with the uracil moiety at either the α- or the γ-position. The use of a prolonged reaction time resulted in the exclusive formation of the 4-substituted dihydrothiopyran derivative 10. The result suggests that an equilibrium is operative in the formation of the α- and γ-adducts and that the latter should be more thermodynamically stable than the former. This conclusion was also supported by theoretical calculations.     

Spontaneous self-assembly process for threadlike micelles

More than 100 micros dissipative particle dynamics simulations were carried out to investigate the spontaneous formation process of threadlike micelles from the random configuration for surfactant molecules. Stable spherical micelles were formed during the earlier stage. These spherical micelles fused to each other and grew into rodlike and threadlike micelles during the later stage. The length and radius of a micelle were estimated by tracing the backbone positions and the distance between the head group particles and the backbone of the micelles, respectively. The ratio of the largest to the smallest principal moments of inertia for each micelle was calculated as the micelle shape.