Rapid Microwave‐Promoted Synthesis of Polyurethanes from a Fluorene Unit‐Containing Diol and Diisocyanates

A fluorene diol derivative, 9,9‐bis[4‐(2‐hydroxyethoxy)phenyl]fluorene ( 1 ), reacted with diisocyanates such as 1,3‐bis(isocyanatomethyl)cyclohexane ( 2a ), 1,6‐diisocyanatohexane ( 2b ), and 1,3‐bis(isocyanatomethyl)benzene ( 2c ) under temperature‐controlled microwave irradiation to form the corresponding polyurethanes with being 30 000 to 60 000, measured by GPC with reference to polystyrene standards within 5 to 10 min at 160 to 200 °C. In the reactions of 2a and b , the molecular weights were 15 to 20 times higher than those obtained by conventional oil bath heating. For a solvent of the microwave‐promoted reaction, a hydrocarbon compound, decalin, is preferably used to undergo the polymerization cleanly without unfavorable coloration and/or gelation.

     

Synthesis of a protected ribonucleoside phosphoramidite-linked spin label via an alkynyl chain at the 5′ position of uridine

New, spin-labeled nucleosides, and an efficient synthetic route for a modified uridine amidite, were developed. The spin-labeled part was the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) group, which was linked via an alkynyl chain at the 5 position of uridine. Three typical protecting groups, the t-butyldimethylsilyl (TBDMS) group at 2′, the dimethoxytrityl (DMTr) group at 5′, and the phosphoramidite group at 3′, were introduced to produce an automated nucleic acid synthesizer. The TEMPO group at the 5 position in the uridine structure affected introduction of bulky protecting groups, such as the DMTr group at the 5′ position and the TBDMS group at the 2′ position. The electron paramagnetic resonance (EPR) data revealed a nitroxyl radical in the structure of synthetic nucleoside compounds; however, RNA produced by automated synthesis using a TEMPO-linked uridine phosphoramidite building block was EPR silent.     

Detailed balance condition and effective free energy in the primitive chain network model

We consider statistical mechanical properties of the primitive chain network (PCN) model for entangled polymers from its dynamic equations. We show that the dynamic equation for the segment number of the PCN model does not reduce to the standard Langevin equation which satisfies the detailed balance condition. We propose heuristic modifications for the PCN dynamic equation for the segment number, to make it reduce to the standard Langevin equation. We analyse some equilibrium statistical properties of the modified PCN model, by using the effective free energy obtained from the modified PCN dynamic equations. The PCN effective free energy can be interpreted as the sum of the ideal Gaussian chain free energy and the repulsive interaction energy between slip-links. By using the single chain approximation, we calculate several distribution functions of the PCN model. The obtained distribution functions are qualitatively different from ones for the simple slip-link model without any direct interactions between slip-links.     

POISONING OF ACTIVE SITES ON ZIEGLER-NATTA CATALYST FOR PROPYLENE POLYMERIZATION

The effects of poisoning materials on catalytic activity and isospecificity of the supported Ziegler-Natta catalyst were investigated.A minor amount of simple structure of Lewis base,i.e.,methanol,acetone,ethyl acetate,was introduced into the catalyst slurry for partial poisoning catalytic active centers.It was found that the variations in deactivation power were in the order of methanol>acetone>ethyl acetate.The kinetic investigation via stopped-flow polymerization showed that poisoning compounds caused...     

Neutron powder diffraction study of the crystal and magnetic structures of BiNiO3 at low temperature

The crystal and magnetic structures of the charge ordered perovskite BiNiO₃ have been studied at temperatures from 5 to 300 K using neutron diffraction. Rietveld analysis of the data shows that the structure remains triclinic (space group ) throughout the whole temperature range. Bond-valence sum calculations based on the Bi-O and Ni-O bond distances confirm that the charge distribution is Bi³⁺_0.5Bi⁵⁺_0.5Ni²⁺O₃ down to 5 K. The magnetic cell is identical to that of the triclinic superstructure and a G-type antiferromagnetic model gives a good fit to the magnetic intensities, with an ordered Ni²⁺ moment of 1.76(3) μ_B at 5 K. However, BiNiO₃ is ferrimagnetic due to the inexact cancellation of opposing, inequivalent moments in the low symmetry cell.     

Observing the Stimulated Raman Gain Spectra of Solutions Using an Infrared Pump Pulse with Narrow Linewidth and a Low-Noise CW Probe Laser

Stimulated Raman gain (SRG) spectroscopy using infrared pump pulses with narrow linewidth and a low-noise cw probe infrared laser was proposed. High-resolution Raman spectra of solutions were obtained. The SRG spectra of crystal GaP, benzene, and toluene were measured to confirm the spectral resolution and sensitivity over the terahertz (THz) region. We discuss the polarization dependence of the spectral measurement of carbon tetrachloride. Our system can detect organic molecules in aqueous solutions.     

Development of rapid plutonium analysis for environmental samples by isotope dilution/inductively coupled plasma mass spectrometry with on-line column.

This paper describes our development of a rapid on-line column/ID-ICP-MS technique for the analysis of plutonium (Pu) in environmental samples using an UTEVA extraction chromatograph resin (UTEVA resin) column. It took only 40 min to separate and measure Pu in the sample solution, including the time for conditioning the resin column for the next analysis. In our method, Pu in a 3 M nitric acid solution was fed to the UTEVA resin, and then eluted from the resin by reducing Pu to Pu(III) with 3 M nitric acid mixed with 0.01 M ascorbic acid after washing the resin. The outflow from the resin column was directly introduced to an ICP-MS system. The low concentration of ascorbic acid and the small volume of the eluting solution (0.6 mL) made successive stable analysis possible without any skimmer cone clogging. The chemical recovery of Pu during column operation was 70%, and typical lower detection limits for 239Pu, 240Pu and 242Pu were 9.2, 4.3 and 7.5 fg (21, 36 and 1.1 microBq), respectively. We analyzed five international standard materials for Pu, and obtained good results.     

Kinetic Studies Prove High Catalytic Activity of a Diene–Rhodium Complex in 1,4‐Addition of Phenylboronic Acid to α,β‐Unsaturated Ketones

In the 1,4‐addition of phenylboronic acid to α,β‐unsaturated ketones, [Rh(OH)(cod)]₂ has a much higher catalytic activity than [Rh(OH)(binap)]₂ (cod=1,5‐cyclooctadiene, binap=2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl). Kinetic studies revealed that the rate‐determining transmetalation step in the catalytic cycle has a large rate constant when [Rh(OH)(cod)]₂ is used.     

Rotaxane Formation of Multicyclic Polydimethylsiloxane in a Silicone Network: A Step toward Constructing “Macro-Rotaxanes” from High-Molecular-Weight Axle and Wheel Components

Rotaxanes consisting of a high-molecular-weight axle and wheel components (macro-rotaxanes) have high structural freedom, and are attractive for soft-material applications. However, their synthesis remains underexplored. Here, we investigated macro-rotaxane formation by the topological trapping of multicyclic polydimethylsiloxanes (mc-PDMSs) in silicone networks. mc-PDMS with different numbers of cyclic units and ring sizes was synthesized by cyclopolymerization of a α,ω-norbornenyl-functionalized PDMS. Silicone networks were prepared in the presence of 10–60 wt % mc-PDMS, and the trapping efficiency of mc-PDMS was determined. In contrast to monocyclic PDMS, mc-PDMSs with more cyclic units and larger ring sizes can be quantitatively trapped in the network as macro-rotaxanes. The damping performance of a 60 wt % mc-PDMS-blended silicone network was evaluated, revealing a higher tan δ value than the bare PDMS network. Thus, macro-rotaxanes are promising as non-leaching additives for network polymers.