In situ measurement on nonuniform velocity distributionin external detonation exhaust flow by analysis ofspectrum features using TDLAS

Instantaneous and precise velocity sensing is a critical part of research on detonation mechanism and flow evolution.This paper presents a novel multi-projection tunable diode laser absorption spectroscopy solution,to provide a real-time and reliable measurement of velocity distribution in detonation exhaust flow with obvious nonuniformity.Relations are established between overlapped spectrums along probing beams and Gauss velocity distribution phantom according to the frequency shifts and tiny variations in components of light-of-sight absorbance profiles at low frequencies analyzed by the fast Fourier transform.With simulated optical measurement using H2O feature at 7185.6 cm-1 carried out on a phantom generated using a simulation of two-phase detonation by a two-fluid model,this method demonstrates a satisfying performance on recovery of velocity distribution profiles in supersonic flow even with a noise equivalent absorbance up to 2×10^-3.This method is applied to the analysis of rapidly decreasing velocity during a complete working cycle in the external flow field of an air-gasoline detonation tube operating at 25 Hz,and results show the velocity in the core flow field would be much larger than the arithmetic average from traditional tunable diode laser doppler velocimetry.This proposed velocity distribution sensor would reconstruct nonuniform velocity distribution of high-speed flow in low cost and simple operations,which broadens the possibility for applications in research on the formation and propagation of external flow filed of detonation tube.     

二维表面浮雕结构的矢量衍射分析

利用等效介质理论,通过严格的耦合波理论计算和分析了二维表面浮雕结构的反射效率与各种因素的关系,给出了不同情况下的变化曲线;同时计算出了该结构在正入射情况下的等效折射率系数。明确提出：不管是对称的还是非对称的二维表面浮雕结构,方位角和极化角的变化对其反射率的影响都不明显;从而得出二维表了雕结构可以实现消偏振、减反的特性。分析了该结构的带宽限制,给出了在给定结构下受限的带宽;同时对浮雕高度加工误差对反射率的影响作了分析,对实际工作有一定的指导意义。     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

Facile synthesis of sulfenyl-substituted isocoumarins,heterocycle-fused pyrones and 3-(inden-1-ylidene)isobenzofuranones by FeCl3-promoted regioselective annulation of o-(1-alkynyl)benzoates and o-(1-alkynyl)heterocyclic carboxylates with disulfides

Reported herein is the FeCl₃-promoted intermolecular sulfoesterification of o-(1-alkynyl)benzoates with disulfides, which provides a convenient and efficient method for synthesis of 4-sulfenylisocoumarins. Various functional groups such as methoxy, halides, ester, cyano and silicon groups in the substrates are tolerated, and heterocycle-fused chalcogenylpyrones are also successfully achieved directly from the corresponding heterocyclic precursors under the same reaction conditions. In addition, starting from diynylbenzoate, this reaction sequence can be combined with a bicyclization step leading to the tetracyclic (E)-3-(2-phenyl-3-phenylchalcogenylinden-1-ylidene)isobenzofuranone frameworks with high regiospecificity and exclusive trans stereoselectivity.     

An appraisal of the Suzuki cross-coupling reaction for the synthesis of novel fluorescent coumarin derivatives

We report the chemical design and development of 3-aryl-substituted 7-alkoxy-4-methylcoumarins with enhanced fluorogenic properties. The 3-aryl substituents are installed via an optimized Suzuki–Miyaura cross-coupling (SMC) reaction between a 7-alkoxy-3-bromo-4-methylcoumarin and aryl boronic MIDA esters using Pd(OAc)₂/XPhos in a catalytic system with K₂CO₃ in aqueous THF. Under these conditions, an exocyclic ester functionality is found to be unaffected. Subsequent saponification revealed a carboxylic acid functionality that is suitable for conjugation reactions. Evaluation of their fluorescence properties indicated that the installed 3-heteroaryl substituent, particularly benzofuran-2-yl, resulted in a significant red shift of both the excitation and emission wavelengths.     

Efficient cross polarization with simultaneous adiabatic frequency sweep on the source and target channels

In this work, we propose a new and efficient heteronuclear cross polarization scheme, in which adiabatic frequency sweeps from far off-resonance toward on-resonance are applied simultaneously on both the source and target spins. This technique, which we call as Simultaneous ADIabatic Spin-locking Cross Polarization (SADIS CP), is capable of efficiently locking both the source and target spins with moderate power even in the presence of large spectral distribution and fast relaxation. It is shown that by keeping the time-dependent Hartmann-Hahn mismatch minimal throughout the mixing period, polarization transfer can be accelerated. Experiments are demonstrated in a powder sample of L-alanine.     

介质材料二次电子发射特性对微波击穿的影响

以介质填充的平行板放电结构为例,本文主要研究了介质填充后微波低气压放电和微放电的物理过程.为了探究介质材料特性对微波低气压放电和微放电阈值的影响,本文采用自主研发的二次电子发射特性测量装置,测量了7种常见介质材料的二次电子发射系数和二次电子能谱.依据二次电子发射过程中介质表面正带电的稳定条件,计算了介质材料稳态表面电位与二次电子发射系数以及能谱参数的关系.在放电结构中引入与表面电位相应的等效直流电场后,依据电子扩散模型和微放电中电子谐振条件,分别探讨了介质表面稳态表面电位的大小对微波低气压放电和微放电阈值的影响.结果表明,介质材料的二次电子发射系数以及能谱参数越大,介质材料的稳态表面电位也越大,对应的微波低气压放电和微放电阈值也越大.所得结论对于填充介质的选择有一定的理论指导价值.     

HIRFL-CSR外靶装置上的放射性束实验数据分析方法研究

开发了HIRFL-CSR外靶实验装置的大型数据分析程序(ANAETF),并成功应用于核物理实验数据分析。详细阐述了该程序中的数据分析流程、漂移室寻迹算法、粒子鉴别方法和反应截面提取技术。利用本程序分析了240 MeV/u能量下12C次级束流打碳靶的实验数据,实现了清楚的碳和硼剩余核的粒子鉴别,总探测效率达到 ~90%,本工作提取的反应截面与已有的实验结果符合较好。     

Highly oxidized graphene with enhanced fluorescence and its direct fluorescence visualization

We prepared hyper-oxidized graphene (HOG) as a form of graphene derivative by additional oxidation of graphene oxide (GO) sheets. HOG, which formed more functional groups and isolated conjugated clusters on the sheets, accordingly showed high solubility in water and alcohols, high transmittance and film transparence, longer fluorescence decay constant time, and enhanced fluorescence in states of solution and solid. By contrast, GO has much weaker fluorescence in solution and its fluorescence is totally quenched in solid. The influences of concentration, metallic ions, and pH on HOG fluorescence in aqueous solution were also investigated in detail. Due to HOG’s strong fluorescence, direct visualization was realized on substrates and in solution. In addition, direct 3D fluorescence visualizations of HOG phase in polymer composites were achieved. These results show the great potential of HOG in a broad range of applications, from biological labeling, probes, and drug carriers to high-performance composites and nanomanipulation.