TEXTURE AND CRYSTALLINITY EVOLUTION IN ISOTACTIC POLYPROPYLENE INDUCED BY ROLLING AND THEIR INFLUENCE ON MECHANICAL PROPERTIES

The orientation and crystallinity evolution of isotactic polypropylene （iPP） induced by rolling were studied using wide angle X-ray scattering with an area detector. The tensile mechanical properties of rolled isotactic polypropylene sheets were also measured in this work. The texture component method was used to analyze the rolling texture. The rolling texture consists mainly of （010）[001], （130）[001] and [001]//RD fiber components in the sample with a rolling true strain of 1.5. The results reveal that crystallinity drastically decreases during rolling. It is suggested that amorphization is a deformation mechanism which takes place as an alternative to crystallographic intralamellar slip depending on the orientation of the lamellae. Both the orientation and crystallinity affect the tensile mechanical properties of rolled polypropylene. Crystallinity influences the elastic modulus on both directions and yield strength on transverse direction at the first stage of deformation. Orientation is the main reason for the changes of mechanical properties, especially at the latter part of deformation. The changes of both tensile strength and elongation percentage on rolling direction are larger than those on transverse direction, which results from the orientation. At last, the anisotropic mechanical properties occur on the rolling and transverse direction： high tensile strength with low elongation percentage on rolling direction and low tensile strength with high elongation percentage on transverse direction.     

Ab initio study of (13)C(alpha) chemical shift anisotropy tensors in peptides

This study reports magnitudes and the orientation of the (13)C(alpha) chemical shift anisotropy (CSA) tensors of peptides obtained using quantum chemical calculations. The dependency of the CSA tensor parameters on the energy optimization of hydrogen atom positions and hydrogen bonding effects and the use of zwitterionic peptides in the calculations are examined. Our results indicate that the energy optimization of the hydrogen atom positions in crystal structures is necessary to obtain accurate CSA tensors. The inclusion of intermolecular effects such as hydrogen bonding in the calculations provided better agreement between the calculated and experimental values; however, the use of zwitterionic peptides in calculations, with or without the inclusion of hydrogen bonding, did not improve the results. In addition, our calculated values are in good agreement with tensor values obtained from solid-state NMR experiments on glycine-containing tripeptides. In the case of peptides containing an aromatic residue, calculations on an isolated peptide yielded more accurate isotropic shift values than the calculations on extended structures of the peptide. The calculations also suggested that the presence of an aromatic ring in the extended crystal peptide structure influences the magnitude of the delta(22) which the present level of ab initio calculations are unable to reproduce.     

Neutron activation analysis of extractable organohalogens in milk from China

Instrumental neutron activation analysis (INAA) has been used for the determination of extractable organohalogens (EOX) in milk. The detection limits are 50 ng, 8 ng and 3.5 ng for Cl, Br and I, respectively. The EOX concentrations in milk samples from various regions of China were determined. Meanwhile, organochlorine pesticides residues were detected by gas chromatography. The concentrations of the EOX in the milk samples are decreasing in the order of EOCl >> EOBr > EOI, and EOCl accounts for 95% of the total EOX. The average concentration of EOCl in milk is 4.44 ·g/g expressed as fat weight basis, with the highest value of 17.6 ·g/g from South China. The mean concentrations of total HCH and DDT are 0.038 ·g/g and 0.046 ·g/g, respectively. Organochlorine pesticides account only for 1.6% of the EOCl, indicating the very high proportion of the unknown EOCl in the milk sample. This revised version was published online in August 2006 with corrections to the Cover Date.     

AIBN-initiated radical addition of gem-difluorinated alkyl iodides to alkynes and the Pd-catalyzed Sonogashira coupling reaction of E-phenyl difluoromethylene vinylic iodides with terminal alkynes

The addition of gem-difluorinated alkyl iodides to alkynes initiated by AIBN neatly gave the corresponding difluoromethylene vinyl iodides among which the stereoselectivity of aromatic acetylenes was high. The further coupling reaction of E-phenyl difluoromethylene vinyl iodides with terminal alkynes in the presence of catalytic palladium afforded the substituted difluorinated enynes.     

Mechanical properties and stability measurement of cholesterol-containing liposome on mica by atomic force microscopy

The micromechanical properties of pure and cholesterol modified egg yolk phosphatidylcholine (EggPC) vesicles prepared by sonication were studied by atomic force microscopy (AFM) on mica surface. The force curves between an AFM tip and an unruptured vesicle were obtained by contact mode. During approach, two repulsion regions with two breaks were observed. The slopes of the two repulsive force regimes for the pure EggPC vesicles are determined to be several times lower than that of EggPC/cholesterol vesicles. The elastic properties from force plot analysis based on the Hertzian model showed that Young's modulus (E) and the bending modulus (kc) of cholesterol-modified vesicles increased several-fold compared with pure EggPC vesicles. The significant difference is attributed to the enhanced rigidity of the EggPC vesicles as a result of the incorporation of cholesterol molecules. The behavior of cholesterol-modified vesicles upon adsorption is different from that in solution as revealed by mechanical properties. The results indicate that AFM can provide a direct method to measure the mechanical properties of adsorbed small liposomes and to detect the stability change of liposomes.     

Copper-catalysed photoinduced decarboxylative alkynylation: a combined experimental and computational study

Redox-active esters (RAEs) as alkyl radical precursors have demonstrated great advantages for C–C bond formation. A decarboxylative cross-coupling method is described to afford substituted alkynes from various carboxylic acids using copper catalysts CuCl and Cu(acac)₂. The photoexcitation of copper acetylides with electron-rich NEt₃ as a ligand provides a general strategy to generate a range of alkyl radicals from RAEs of carboxylic acids, which can be readily coupled with a variety of aromatic alkynes. The scope of this cross-coupling reaction can be further expanded to aliphatic alkynes and alkynyl silanes using a catalytic amount of preformed copper-phenylacetylide. In addition, DFT calculations revealed the favorable reaction pathway and that the bidentate acetylacetonate ligand of the copper intermediate plays an important role in inhibiting the homo-coupling of the alkyne.

Redox-active esters (RAEs) as alkyl radical precursors have demonstrated great advantages for Cu-catalysed C–C bond formation.     

Increased throughput in quantitative bioanalysis using parallel-column liquid chromatography with mass spectrometric detection

The feasibility of quantitative bioanalysis by parallel-column liquid chromatography in conjunction with a conventional single-source electrospray mass spectrometer has been investigated using plasma samples containing a drug and its three metabolites. Within a single chromatographic run time, sample injections were made alternately onto each of two analytical columns in parallel at specified intervals, with a mass spectrometer data file opened at every injection. Thus, the mass spectrometer collected data from two sample injections into separate data files within a single chromatographic run time. Therefore, without sacrificing the chromatographic separation or the selected reaction monitoring (SRM) dwell time, the sample throughput was increased by a factor of two. Comparing the method validation results obtained using the two-column system with those obtained using the corresponding conventional single-column approach, the methods on the two systems were found to be equivalent in terms of accuracy and precision. The parallel-column system is simple and can be implemented using existing laboratory equipment with no additional capital outlays. A parallel-column system configured in this manner can be used not only for the within-a-run analysis of two samples containing two different sets of chemical entities, but also for the within-a-run analysis of two samples containing the same set of chemical entities.     

1—酰基—4—氯环己烷与取代芳烃的区域与立体选择性反应

从环己烯合成了１－酰基－４－氯环己烷，发现在其在ＡｌＣｌ３催化与苯，氯苯，溴苯等优先生成反式１－芳基－４－酰基环己烷，与联苯反应时选择性较差。     

羟丙基醋酸纤维素的合成及其膜的反渗透性

研究了羟丙基纤维素和羟丙基醋酸纤维素的合成。制备羟丙基纤维素的较佳反应温度为40℃左右和2小时或稍长,羟丙基含量随环氧丙烷浓度的增加而增加。在制备羟丙基醋酸纤维素时,随羟丙基含量的增加,所需醋化和水解的时间减少。以甘油-正丙醇或磷酸为添加剂,丙酮为溶剂经30～60s蒸发后制得了羟丙基醋酸纤维素反渗透膜。后者在20kg/cm~2下对氯化钠脱盐率可达95～98％,水通量1.0～2.1mL/cm~2·h,其使用温度上限比醋酸纤维素反渗透膜提高10℃以上。     

New Nitrogenous Bisabolene‐Type Sesquiterpenes from a Hainan Sponge Axinyssa aff. variabilis

Two new uncommon nitrogenous sesquiterpenes, 11‐ethoxy‐3‐formamidotheonellin ( 1 ) and 7‐ethoxy‐3‐formamidobisabolane‐8,10‐diene ( 2 ), together with two known related sesquiterpenes, 3‐formamidotheonellin (=theonellin formamide; 3 ) and theonellin isothiocyanate ( 4 ), were isolated from the Hainan sponge Axinyssa aff. variabilis. Their structures were determined on the basis of extensive spectroscopic analysis and by comparison of their NMR data with those of known compounds.