Study of decay mechanisms in B--->Lambdac+ppi- decays and observation of low-mass structure in the Lambdac+p system

Using a sample of 152 x 10(6) BB pairs accumulated with the Belle detector at the KEKB e+e- collider, we study the decay mechanism of three-body charmed decay B- --> Lambdac+ ppi-. The intermediate two-body decay B--->Sigmac (2455)0 p is observed for the first time with a branching fraction of (3.7 +/- 0.7 +/- 0.4 +/- 1.0) x 10(-5) and a statistical significance of 8.4sigma. We also observe a low-mass enhancement in the (Lambdac+p) system, which can be parametrized as a Breit-Wigner function with a mass of (3.35(-0.02)(+0.01) +/-0.02) GeV/c2 and a width of (0.07(-0.03)(+0.04) +/-0.04) GeV/c2. We measure its branching fraction to be (3.9(-0.7)(+0.8) +/- 0.4 +/- 1.0) x 10(-5) with a statistical significance of 6.2sigma. The errors are statistical, systematic, and that of the Lambdac+-->pK- pi+ decay branching fraction.     

Improved constraints on D0-D0 mixing in D0 --> K+ pi- decays from the Belle detector

We report the results of a search for D0-D0 mixing in D0 --> K+ pi- decays based on 400 fb(-1) of data accumulated by the Belle detector at KEKB. Both assuming CP conservation and allowing for CP violation, we fit the decay-time distribution for the mixing parameters x and y, as well as for the parameter R(D), the ratio of doubly Cabibbo-suppressed decays to Cabibbo-favored decays. The 95% confidence level region in the (x'2,y') plane is obtained using a frequentist method. Assuming CP conservation, we find x'2 < 0.72 x 10(-3) and -9.9 x 10(-3) < y' < 6.8 x 10(-3) at the 95% confidence level; these are the most stringent constraints on the mixing parameters to date. The no-mixing point (0,0) has a confidence level of 3.9%. Assuming no mixing, we measure R(D) = (0.377 +/- 0.008 +/- 0.005)%.     

基于Parzen窗的油液原子光谱数据半监督FCM聚类研究

提出了一种基于Parzen窗的半监督模糊C-均值(Semi-supervised Fuzzy C-Means Based on Parzen window,PSFCM)聚类算法。根据训练样本确定出模糊C-均值(Fuzzy C-Means,FCM)的初始聚类中心;利用Parzen窗法计算出测试样本对各类状态的隶属度后,重新定义了隶属度迭代公式。通过齿轮箱磨损实验台模拟了齿轮箱的2种典型磨损故障并采集了油样。选取实验油样光谱分析数据中代表性元素Fe,Si,B的浓度值作为分析数据集的3维特征量,分别进行了FCM聚类和PSFCM聚类分析。聚类结果为:FCM聚类的正确率为48.9%,而融入了监督信息的PSFCM聚类的正确率为97.4%。实验说明,将PSFCM算法引入到油液原子光谱分析,降低了对人为经验和大量故障数据的依赖,提高了齿轮箱磨损故障诊断的准确度。     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

基于遗传LM算法的涂层目标光谱偏振BRDF建模分析

通过比较测量方法测量得到绿漆涂层木板探测目标在400～720 nm的光谱偏振二向反射分布函数值,从获得的户外试验测量数据入手,分析与探测角、波长之间的关系,通过有限探测条件得到的光谱偏振二向反射分布函数值(BRDF)建立光谱偏振BRDF模型,来描述探测目标的偏振二向反射特性。其中利用基于小面元的模型建立光谱偏振BRDF模型,利用遗传算法和Levenberg-Marquardt(LM)算法相结合的优化算法来获得非线性模型参数。仿真实验结果表明采用的遗传LM优化算法具有较好的性能,能较快较准确得到非线性的模型参数。真实实验数据证明了基于小面元模型的正确性,表明光谱偏振二向反射分布函数建模方法结果的可靠性。最后与绿漆涂层铁板目标的模型反演参数进行比较得出：2种不同材质、相同颜色涂层的目标,具有较为接近的折射率,其较小差别可以理解为由涂层的厚度、均匀程度的不同导致,而非不同的材质所引起。     

Efficiency enhancement of InGaN based blue light emitting diodes with InGaN/GaN multilayer barriers

The advantages of InGaN based light-emitting diodes with InGaN/GaN multilayer barriers are studied.It is found that the structure with InGaN/GaN multilayer barriers shows improved light output power,lower current leakage,and less efficiency droop over its conventional InGaN/GaN counterparts.Based on the numerical simulation and analysis,these improvements on the electrical and the optical characteristics are mainly attributed to the alleviation of the electrostatic field in the quantum wells(QWs) when the InGaN/GaN multilayer barriers are used.     

不同氮源制备CNx纳米管薄膜及其低场致电子发射性能

采用高温热解法,分别以氯化铵(NH4Cl)和乙二胺(C2H8N2)为氮源在洁净的硅片上沉积生长CNx纳米管薄膜.利用扫描电子显微镜、高分辨率透射电子显微镜和拉曼光谱对CNx纳米管进行形貌观察和表征.结果显示不同氮源制备出的CNx纳米管薄膜的洁净度、有序度以及纳米管的结构明显不同.热解乙二胺(C2H8N2)/二茂铁(C10H10Fe)制备出的结晶度较低的"竹节状"结构CNx纳米管平行基底表面有序生长,而且低场致电子发射性能优越,开启电场1.0V/μm,外加电场达到2.89V/μm时发射电流密度为860μA/cm2.     

光腔模式及光束传输的特征向量算法

发展了一种新颖的适用于光腔模式及光束传输模拟计算的特征向量法.该方法的核心是基于菲涅耳-基尔霍夫衍射积分理论构造了一种新的光腔传输矩阵,通过求解激光谐振腔的本征积分方程,即可一次求解得到表征腔镜上多个光场模式振幅及相位分布的特征向量组;而谐振腔内或腔外任意地方的光场分布,也可采用该方法进行光束传输模拟而求得.对与该方法有关的单元划分、形函数选取、误差及稳定性分析等问题进行了论述,分析表明:合适的单元划分和形函数选取有利于提高计算速度、精度和稳定性.     

研究堆慢正电子源构建中的关键机理问题

研究堆慢正电子源是获得高强度慢正电子束流的有效方式,国际上己建成多座装置并获得广泛应用.与常规同位素慢正电子源相比,研究堆慢正电子源的物理过程复杂,影响末端束流强度的因素众多,对其进行深入研究与合理建模是未来在中国绵阳研究堆(CMRR)上构建慢正电子源的基础.本文厘清了研究堆慢正电子产生的关键过程与物理机理,建立了预测末端正电子束流强度的理论模型,找到了影响其末端强度的主要物理量:快正电子体产生率、慢化体有效表面积、慢化体扩散距离、慢正电子从表面被提取到靶环末端的效率、及束流系统提取效率.用多种实验结果对模型进行校验,包括多个同位素慢正电子源的效率测量值,以及PULSTAR研究堆慢正电子源测量结果,充分验证了模型正确性.根据模型对各物理量的影响因素进行了分析,找到了需着重关注的影响因素,对未来源/靶结构的设计给出建议.