Kinetic parameters from thermogravimetric study of used rubber granulates–polyurethane composites

From the TG data of rubber granulates, different polyurethane and composites it can be seen that the thermal decomposition for the rubber granulate and all of the composites start above 520 K. Two major mass losses for the rubber granulates and majority of the composites were observed and thermal decomposition is essentially complete by ~820 K. The changes of activation energies of lower and higher temperature decomposition, calculated according to the different equations were observed for a priori assumed first-order reaction for devolatilisation. Differences between determined and calculated results could suggest a possible reaction between polyurethane agents and rubber granulate during the composites formations.     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.     

Electronic structures of 4d transition metal monoxides by density functional theory

Bond distances, dissociation energies, ionization potentials and electron affinities of 4d transition metal monoxides from YO to CdO and their positive and negative ions were studied by use of density functional methods B3LYP, BLYP, B3PW91, BPW91, B3P86, BP86, SVWN, MPW1PW91 and PBE1PBE. It was found that calculated properties are highly dependent on the functionals employed, especially for dissociation energy. For most neutral species, pure density functionals BLYP, BPW91 and BP86 have good performance in predicting dissociation energy than hybrid density functionals B3LYP, B3PW91 and B3P86. In addition, BLYP gives the largest bond distance compared with other density functional methods, while SVWN gives shortest bond distance, largest dissociation energy and electron affinity. For the ground state, the spin multiplicity of the charged species can be obtained by ± 1 of their corresponding neutral species.     

Miscibility and transesterification in ternary blends of poly(ethylene naphthalate)/poly(trimethylene terephthalate)/poly(ether imide)

Miscibility and morphology of poly(ethylene 2,6-naphthalate)/poly(trimethylene terephthalate)/poly(ether imide) (PEN/PTT/PEI) blends were investigated by using a differential scanning calorimeter (DSC), optical microscopy (OM), wide-angle X-ray diffraction (WAXD), and proton nuclear magnetic resonance (¹H-NMR). In the ternary blends, OM and DSC results indicated immiscible properties for polyester-rich compositions of PEN/PTT/PEI blends, but all compositions of the ternary blends were phase homogeneous after heat treatment at 300 °C for more than 30 min. An amorphous blend with a single T _g was obtained in the final state, when samples were annealed at 300 °C. Experimental results from ¹H-NMR identified the production of PEN/PTT copolymers by so-called “transesterification”. The influence of transesterification on the behaviors of glass transition and crystallization was discussed in detail. Study results identified that a random copolymer promoted the miscibility of the ternary blends. The critical block lengths for both PEN and PTT hindered the formation of crystals in the ternary blends. Finally, the transesterification product of PEN/PTT blends, ENTT, was blended with PEI. The results for DSC and OM demonstrated the miscibility of the ENTT/PEI blends.     

Fingerprint quality control of Tianjihuang by high-performance liquid chromatography-photodiode array detection

A novel, simple and accurate fingerprint method was developed using high-performance liquid chromatography-photodiode array detection (HPLC-DAD) for the quality control of Hypericum japonicum thunb (Tianjihuang), a Chinese herbal medicine used for the treatment of several bacterial diseases, infectious hepatitis, gastrointestinal disorder, internal hemorrhage and tumors. For the first time, the feasibility and advantages of employing chromatographic fingerprint were investigated and demonstrated for the evaluation of Tianjihuang by systematically comparing chromatograms with a professional analytical software recommended by State Food and Drug Administration (SFDA). Our results revealed that the chromatographic fingerprint combining similarity evaluation could efficiently identify and distinguish raw herbs of Tianjihuang from different sources. The effects resulted from collecting locations, harvesting time and storage time on herbal chromatographic fingerprints were also examined.     

Decarbopalladation of pi-allylpalladium intermediates formed from palladium-catalyzed arylations of 3-allen-1-ols

[reaction: see text] Unusual palladium-catalyzed arylative fragmentations of acyclic 3-allen-1-ols were observed. Oxidative addition of Pd(0) to aryl halides would form the arylpalladium halides, which added to the central carbon of allenes via carbopalladation to form the pi-allylpalladium intermediates. The pi-allylpalladium intermediates would be reductively eliminated via carbon-carbon cleavage to give the arylated dienes and the alpha-hydroxyalkylpalladium intermediates, which were further reductively eliminated to the corresponding aldehydes.     

Mono- and dinuclear five-coordinate cyclometalated palladium(II) compounds

Reaction of cyclometalated halide-bridged Pd(II) complexes 1-4 with the tertiary triphosphine ligand (Ph2PCH2CH2)2PPh (triphos) yielded complexes [((Ph2PCH2CH2)2PPh-P,P,P)Pd(N(Cy)=(H)C)C6H2(C(H)=N(Cy))Pd((Ph2PCH2CH2)2PPh-P,P,P)][ClO4]2 5, [Pd(C6H4-N=NC6H5)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] 6, and [Pd(R-C6H3C(H)=NCy)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] (7; R = 4-CHO, 8; 3-CHO). Spectroscopic and analytic data suggest five-coordination on the palladium atom, which, for complexes 5, 6, and 7, was confirmed by X-ray crystallography. The geometry around palladium may be view as a distorted trigonal bipyramid, with the palladium, nitrogen, and terminal phosphorus atoms in the equatorial plane. Compound 5 is the first doubly cyclometalated palladium(II) compound with two pentacoordinated metal centers. The structure of 6 comprises two discrete cations with slightly different geometries, showing the importance of crystal packing forces in order to determine the coordination arrangement.     

Ruthenium-based Conjugated Polymer and Metal-organic Framework Nanocomposites for Glucose Sensing

Many studies have focused on effective ways to exploit enzyme immobilization on an electrode surface to help improve the performance of enzymatic electrochemical biosensors. Herein, a novel glucose sensor was fabricated by immobilizing glucose oxidase (GOx) onruthenium-based conjugated polymer (CP) and metal-organic framework (MOF) nanocomposites. This has not only reduced the applied potential to 0.2 V (vs. Ag/AgCl), but also improved the effective surface area for enzyme immobilization.PPG@Ru@UiO-66-NH₂ was tailored by controlled chemical synthesis from a pre-synthesized water-soluble conjugated polymer (poly(N-phenylglycine)) and metal-organic framework (UiO-66-NH₂). The resulting nanocomposites were characterized using Fourier transform infrared spectroscopy, X-ray fluorescence, scanning electron microscopy, and cyclic voltammetry. The PPG@Ru@UiO-66-NH₂/GOx coated electrodedisplayed a linear measurementrange for glucose from 1 mM to 10 mM, with a sensitivity of 45.92 μA ⋅ mM⁻¹cm⁻¹ and limit of detection of5 μM( ). Furthermore, the practical application of the fabricatedglucosesensor was tested in simulative blood samples with satisfactoryaccuracy. This approach alsoopens a new door for applications regarding both enzymatic electrochemical biosensors and enzymatic biofuel cells (EBFCs).     

Rational design of an “all-in-one” phototheranostic

We report here porphodilactol derivatives and their corresponding metal complexes. These systems show promise as “all-in-one” phototheranostics and are predicated on a design strategy that involves controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation. The requisite balance was achieved by tuning the aromaticity of these porphyrinoid derivatives and forming complexes with one of two lanthanide cations, namely Gd³⁺ and Lu³⁺. The net result led to a metalloporphodilactol system, Gd-trans-2, with seemingly optimal ISC efficiency, photothermal conversion efficiency and fluorescence properties, as well as good chemical stability. Encapsulation of Gd-trans-2 within mesoporous silica nanoparticles (MSN) allowed its evaluation for tumour diagnosis and therapy. It was found to be effective as an “all-in-one” phototheranostic that allowed for NIR fluorescence/photoacoustic dual-modal imaging while providing an excellent combined PTT/PDT therapeutic efficacy in vitro and in vivo in 4T1-tumour-bearing mice.

We report here porphodilactol derivatives and their corresponding metal complexes as “all-in-one” phototheranostics by controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation.     

Chains, ladders and sheets of d metal–organic polymers generated from the flexible bipyridyl ligands

By use of the three-layer diffusion method, reactions of flexible bipyridyl ligands (4,4′-bpp or 3,3′-bpp) with M(II) salts (M = Zn, Cd) and multi-carboxylate ligands resulted in the formation of four interesting d¹⁰ metal–organic coordination polymers: [Zn(μ-4,4′-bpp)Br₂]_n (1), [Zn(μ-4,4′-bpp)(1,2-bdc)]_n · nH₂O (2), [Zn(μ-3,3′-bpp)(1,3-bdc)]_n · nCH₃OH · 2nH₂O (3) and [Cd(μ-3,3′-bpp)(C₄H₂O₄)]_n · 3nH₂O (4) (4,4′-bpp = 2,2′-bis(4-pyridylmethyleneoxy)-1,1′-biphenylene; 3,3′-bpp = 2,2 ′-bis(3-pyridylmethyleneoxy)-1,1′-biphenylene; bdc=benzenedicarboxylate, C₄H₄O₄ = fumaric acid). Complex 1 has a 2D sheet structure consisting of two unusual zigzag Zn(II) chains which are nearly perpendicular to each other. Complex 2 is comprised of two-leg ladders, in which [Zn(4,4′-bpp)] chains serve as the side rails and 1,2-bdc ligands serve as the cross rungs. In complex 3, every two 1,3-bdc ligands connect the neighbouring Zn(II)-3,3′-bpp dimetallic rings in η¹ coordination modes into an interesting chain structure. Complex 4 consists of an anionic macrocycle-containing cadmium dicarboxylate sheets that are separated by 3,3′-bpp. These d¹⁰ metal complexes exhibit high thermal stabilities and strong luminescence efficiencies.