One-Pot Synthesis of 1-Alkynylphosphonates

1-Alkynylphosphonates 3 are prepared in a one-pot procedure from diethyl phosphorochloridates 2 and alkynyllithiums 1, which are readily generated by the reaction of 1-alkynes with n-BuLi.     

Synthesis and properties of near IR induced self-healable polyurethane/graphene nanocomposites

A series of self-healable polyurethane (SHPU)/modified graphene (MG) nanocomposites were synthesized from poly(tetramethylene glycol) (PTMG) and 4,4′-methylene diphenyl diisocyanate (MDI) with minute amounts (0–1 wt%) of MG which was chemically modified graphene oxide (GO) with phenyl isocyanate and reduced in the presence of phenylhydrazine.     

Detailed study of a two component smectic 4TPB–8OCB system with a nematic gap. Phase diagram and viscosity study

Abstract

The phase diagram of a two component system composed of two smectic compounds: 4-octyloxy-4′-cyanobiphenyl (8OCB) and 4-isothiocyanatophenyl 4-butylbenzoate (4TPB) was investigated. Three Miesowicz viscosity coefficients η₁, η₂, η₃ and the refractive indices at different temperatures as well as the enthalpies of the phase transitions were measured. It was stated, that the properties of the induced nematic phase, for example, the nematic phase existing between two smectic regions, are the same as the ones observed in the case of low viscosity nematic mesogens.     

A p‐Quinodimethane‐Bridged Porphyrin Dimer

A p‐quinodimethane (p‐QDM)‐bridged porphyrin dimer 1 has been prepared for the first time. An unexpected Michael addition reaction took place when we attempted to synthesize compound 1 by reaction of the cross‐conjugated keto‐linked porphyrin dimers 8 a and 8 b with alkynyl/aryl Grignard reagents. Alternatively, compound 1 could be successfully prepared by intramolecular Friedel–Crafts alkylation of the diol‐linked porphyrin dimer 14 with concomitant oxidation in air. Compound 1 shows intense one‐photon absorption (OPA, λ_max=955 nm, ε=45400 M ^?1 cm^?1) and a large two‐photon absorption (TPA) cross‐section (σ⁽²⁾_max=2080 GM at 1800 nm) in the near‐infrared (NIR) region due to its extended π‐conjugation and quinoidal character. It also exhibits a short singlet excited‐state lifetime of 25 ps. The cyclic voltammogram of 1 displays multiple redox waves with a small electrochemical energy gap of 0.86 eV. The ground‐state geometry, electronic structure, and optical properties of 1 have been further studied by density functional theory (DFT) calculations and compared with those of the keto‐linked dimer 8 b . This research has revealed that incorporation of a p‐QDM unit into the porphyrin framework had a significant impact on its optical and electronic properties, leading to a novel NIR OPA and TPA chromophore.     

How the Generalized Anomeric Effect Influences the Conformational Preference

The generalized anomeric effect refers to the conformational preference of a gauche structure over an anti structure for molecules with a R‐X‐C‐Y moiety. Whereas there are conflicting reports regarding the origin of this ubiquitous effect, a general consensus is that both the steric (more specifically electrostatic) and hyperconjugative interactions contribute. Here we employed the block‐localized wavefunction (BLW) method, which is the simplest variant of ab initio valence bond (VB) theory and can define reference electron‐localized states self‐consistently, to evaluate the magnitude of the hyperconjugation effect in a number of acyclic molecules exhibiting the generalized anomeric effect. The BLW‐based energy decomposition analysis revealed that both the steric and hyperconjugation effects contribute to the conformational preferences of methoxymethyl fluoride and methoxymethyl chlorides. But for the other systems under investigation, including methanediol, methanediamine, aminomethanol and dimethoxymethane, the hyperconjugative interactions play a negative role in the conformational preferences and the steric effect is solely responsible for the generalized anomeric effect.     

Epitope Mapping of Monoclonal Antibodies using Synthetic Oligosaccharides Uncovers Novel Aspects of Immune Recognition of the Psl Exopolysaccharide of Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic Gram‐negative bacterium that can cause life‐threatening infections in critically ill and cystic fibrosis patients. The Psl exopolysaccharide of P. aeruginosa offers an attractive serotype‐independent antigen for the development of immunotherapies. Here, the first chemical synthesis of a panel of oligosaccharides derived from the exopolysaccharide of P. aeruginosa by a synthetic strategy that efficiently deals with the stereoselective installation of several β‐mannosides and the formation of a mannoside that is extended by saccharide moieties at C‐1, C‐2, and C‐3 in a crowded 1,2,3‐cis configuration is described. The approach was employed to prepare tetra‐, penta‐, and hexa‐ and decasaccharide part structures. The compounds were employed to define the epitope requirements of several functionally active monoclonal antibodies (mAbs) that can bind three distinct epitopes of Psl (class I, II, and III). The class II mAb reacted potently with each oligosaccharide indicating its epitope resides within the tetrasaccharide and does not require the branched mannoside of Psl. The class III antibody did not bind the tetra‐ or pentasaccharide; however, it did react potently with the hexasaccharide and weakly with the decasaccharide, suggesting a terminal glucoside is required for optimal binding. Unexpectedly, the class I mAb did not bind any of the oligosaccharides indicating that Psl contains a yet to be elucidated sub‐stoichiometric isoform. This study demonstrates that functional activity of a mAb does not only depend on the avidity of binding but also on the location of an epitope within a bacterial polysaccharide. The results also provide a strong impetus to analyze further the structure of Psl to identify the class I epitope, that is expected to provide an attractive target for the development of a synthetic vaccine for P. aeruginosa.     

超声波辅助木质素磺酸钠烷基化合成表面活性剂

以木质素磺酸钠(LS)和1-溴十二烷为原料,吡啶为催化剂,在碱性醇水混合溶液中,利用超声波辅助烷基化反应制备生物基表面活性剂.通过GPC,UV,FTIR和1H-NMR对木质素磺酸钠及其直接烷基化产物(ALS)、超声烷基化产物(UALS)进行结构表征,结果表明超声活化使木质素磺酸钠的分子量从154200下降到106000,酚羟基的含量从0.65%提高到1.55%,活化效率达139%.1H-NMR谱中甲氧基的峰面积占总面积的比值由超声前的36.0%下降到超声后的21.0%.烷基化反应位点是LS的酚羟基,超声波活化烷基化效率明显高于直接烷基化效率.1%质量浓度的UALS的表面张力为28.2 mN/m,相同质量浓度的ALS和LS的表面张力分别为34.1 mN/m和41.5 mN/m.UALS的临界胶束浓度(CMC)是5×10-2g/L,比LS的低近两个数量级.超声烷基化效果较直接烷基化好的原因在于超声波处理一方面提高了酚羟基的含量,一方面破坏了大分子的三维网状结构,强化了体系的传质和传热效率.     

PdII Complexes of [44]‐ and [46]Decaphyrins: The Largest Hückel Aromatic and Antiaromatic,and Möbius Aromatic Macrocycles

Reductive metalation of [44]decaphyrin with [Pd₂(dba)₃] provided a Hückel aromatic [46]decaphyrin Pd^II complex, which was readily oxidized upon treatment with DDQ to produce a Hückel antiaromatic [44]decaphyrin Pd^II complex. In CH₂Cl₂ solution the latter complex underwent slow tautomerization to a Möbius aromatic [44]decaphyrin Pd^II complex which exists as a mixture of conformers in dynamic equilibrium. To the best of our knowledge, these three Pd^II complexes represent the largest Hückel aromatic, Hückel antiaromatic, and Möbius aromatic complexes to date.     

Development and validation of a LC/TOF MS method for the determination of carboplatin and paclitaxel in nanovesicles

Carboplatin and paclitaxel co-loaded nanovesicles (CPT-PTX-CLV), a novel intravenous formulation void of cremophor EL, may have significant advantages over conventional carboplatin and paclitaxel formulations with respect to tumor targeting, sustained drug release, reduced toxicity, and synergistic efficacy profiles. The aim of this study was to develop and validate a rapid, specific, sensitive, and reliable liquid chromatography–time of flight–mass spectrometry (LC/TOF MS)-based bioanalytical method for the simultaneous quantification of CPT and PTX in a fetal bovine serum (FBS) vehicle containing the dispersed nanovesicles. The analytes were extracted from FBS by simple protein precipitation, with subsequent separation of CPT and PTX on a Waters HPLC SunFire C₁₈ column at a flow rate of 0.25 ml/min using gradient elution mode. The total analytical time was only 12 min. Detection and quantitation was performed by electrospray ionization (ESI) in the positive ionization mode with selective ion monitoring (SIM) at m/z 310.0152 for CPT and 876.3224 for PTX. The calibration curves were linear over the concentration range of 10–4,000 ng/ml for CPT and 5–2,000 ng/ml for PTX (r ² ?>?0.99), with the respective lower limit of quantification (LLOQ) at 10 and 5 ng/ml. The intra- and inter-day precision and accuracy of analysis of the quality control samples at low, medium, and high concentration levels were ≤13.6 % relative standard deviation (RSD) and ≤14.6 % relative errors (RE). The rapid, sensitive, and reproducible LC/TOF MS method may be used to support preclinical and clinical pharmacological studies of the CPT-PTX-CLV administered by injection in animal and human cancer models.