Crystallization Elution Fractionation and Thermal Gradient Interaction Chromatography. Techniques Comparison

Summary: The chemical composition distribution has been shown to be the most critical and discriminating parameter in understanding the performance of industrial polyolefins with non homogeneous comonomer incorporation. The chemical composition distribution is being analyzed by well known techniques such as temperature rising elution fractionation, TREF, crystallization analysis fractionation, CRYSTAF and crystallization elution fractionation, CEF. These techniques separate according to crystallizability and provide a powerful and predictable separation of components based on the presence of branches, irregularities or tacticity differences, independently of the molar mass. TREF, CRYSTAF and CEF can not be used, however, for the separation of more amorphous resins, and may not always provide the best solution for complex multi-component resins due to the existence of some co-crystallization. The application of high temperature interactive HPLC to polyolefins opened a new route to characterize these types of polymers. The use of solvent gradient HPLC for separation of polyethylene and polypropylene and the developments in HPLC on carbon based columns extended further the application of high temperature HPLC in polyolefins. A new approach has been developed recently using the carbon based column but replacing solvent gradient by a thermal gradient which facilitates the analysis of polyethylene copolymers and provides a powerful tool for the analysis of elastomers. Thermal gradient interaction chromatography (TGIC) is being compared with TREF and CEF with the analysis of model samples. The advantages/disadvantages of each technique are being investigated and discussed. The combination of TGIC and TREF/CEF provides an extended range of separation of polyolefins.     

Simultaneous analysis and retention behavior of major isoflavonoids in Radix Puerariae lobatae and Radix Puerariae thomsonii by high performance liquid chromatography with cyclodextrins as a mobile phase modifier

In order to differentiate two species of Radix Puerariae (Radix Puerariae lobatae and Radix Puerariae thomsonii) and to determine major isoflavonoids (puerarin, daidzin, daidzein and genistein) in the samples, a simple high performance liquid chromatography (HPLC) method with isocratic elution employing cyclodextrins (CDs) as mobile phase additives was developed. Various factors affecting the retention of isoflavonoids in the C₁₈ reversed-phase column, such as the nature of CDs, the concentration of hydroxypropyl-β-cyclodextrin (HP-β-CD) and the methanol percentage in the mobile phase, were studied. Experimental results confirmed that HP-β-CD, as a very effective mobile phase additive, could markedly reduce the retention of isoflavonoids, especially daidzein and genistein. The elution of four isoflavonoids could be achieved on a Kromasil^® C₁₈ column within 56 min by using the methanol–water contained 5 mM HP-β-CD (25/75, v/v) mixture as the mobile phase. The formation of the inclusion complexes between isoflavonoids and HP-β-CD explained the modification of the retention of analytes. The apparent formation constants determined by HPLC confirmed that the stoichiometry of HP-β-CD-isoflavonoid complexes was 1:1, and the stability of the complexes depended on the size and property of isoflavonoids. The optimized method was successfully applied for the simultaneous determination of major isoflavonoids in P. lobatae and P. thomsonii samples. This work provides a useful method for the analysis of traditional Chinese herbs.     

Determination of cadmium(II) using glassy carbon electrodes modified with cupferron, ß-naphthol, and multiwalled carbon nanotubes

We report on a simple and reliable method for the determination of trace cadmium ion using a glassy carbon electrode (GCE) modified with cupferron, ß-naphthol and MWCNTs. The operational mechanism consists of several steps: first, the ligand cupferron on the modified electrode reacts with Cd²⁺ ion to form a chelate compound. Next, this chelate is adsorbed by the carrier ß-naphthol following the principle of organic co-precipitation. Finally, the coprecipitated complex is detected by the GCE. This scheme is interesting because it combines preconcentration and electrochemical detection. Two linear responses are obtained, one in the concentration range of 5.0?×?10^?11 to 1.6?×?10^?8 M, the other in the range of 1.6?×?10^?8 to 1.42?×?10^?6 M, with a lower detection limit of 1.6?×?10^?11 M. This modified GCE does not suffer from significant interferences by Cu(II), Hg(II), Ag(I), Fe(III), Pb(II), Cr(III), Zn(II), NO^3?, Cl^?, SO ₄ ^2? ions and EDTA. The response of the electrode remained constant for at least 3 weeks of successive operation. The method presented here provides a new way for the simultaneous separation, enrichment, and electrochemical detection of trace cadmium ion.

Efficient Non-sterilized Fermentation of Biomass-Derived Xylose to Lactic Acid by a Thermotolerant Bacillus coagulans NL01

Xylose is the major pentose and the second most abundant sugar in lignocellulosic feedstock. Its efficient utilization is regarded as a technical barrier to the commercial production of bulk chemicals from lignocellulosic biomass. This work aimed at evaluating the lactic acid production from the biomass-derived xylose using non-sterilized fermentation by Bacillus coagulans NL01. A maximum lactic acid concentration of about 75 g/L was achieved from xylose of 100 g/L after 72 h batch fermentation. Acetic acid and levulinic acid were identified as important inhibitors in xylose fermentation, which markedly reduced lactic acid productivity at 15 and 1.0 g/L, respectively. But low concentrations of formic acid (<2 g/L) exerted a stimulating effect on the lactic acid production. When prehydrolysate containing total 25.45 g/L monosaccharide was fermented with B. coagulans NL01, the same preference for glucose, xylose, and arabinose was observed and18.2 g/L lactic acid was obtained after 48 h fermentation. These results proved that B. coagulans NL01 was potentially well-suited for producing lactic acid from underutilized xylose-rich prehydrolysates.     

Controlling the properties of poly(amino ester urethane)–poly(ethylene glycol)–poly(amino ester urethane) triblock copolymer pH/temperature-sensitive hydrogel

A series of triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(β-amino ester urethane) (PAEU) was synthesized and characterized. Its aqueous solution can be used as a non-cytotoxic, biodegradable, and pH/temperature-sensitive hydrogel system. The copolymer solutions exhibited sol-to-gel and gel-to-sol transitions with increasing pH and temperature, respectively. The properties of this hydrogel system, such as its sol–gel transition diagram, mechanical properties, and degradation rate, can be controlled by modulating the PEG molecular weight, PAEU block length, copolymer concentration, or structure of the monomers. The presence of urethane groups and ionized tertiary amine groups in the copolymer solution at lightly acidic pH may lead to a strong interaction of the copolymer with formulated bioactive therapeutic agents, while the existence of the gel state under physiological conditions (37 °C, pH 7.4) may enable this copolymer hydrogel to be applicable as a drug/protein carrier.     

Synthesis,Structure, Photoluminescence and Thermal Properties of Sodium Ethene‐Bis‐Nitrobenzenesulfonate

Abstract. Sodium ethene‐bis‐nitrobenzenesulfonate, [Na₂(ENS) · 6H₂O]_n( 1 ) was synthesized through coupling reaction of o‐nitrotoluenesulfonic acid in NaOH solution and characterized by single crystal X‐ray diffraction, elemental analysis, IR and ¹H NMR spectroscopy, XRPD, DSC and TGA (where ENS^2– = ethene‐bis‐nitrobenzenesulfonate). The asymmetrical unit of ( 1 ) consists of two octahedral Na^I ions, and the neighboring metal centers are bridged by μ₂ water molecules resulting in the formation of an inorganic tetranuclear unit. The tetranuclear units were connected through the ENS^2– ligands into a 2D topology net. The weak π–π stacking and H‐bonding interactions further stabilized the structure. The crystals of (C₇H₆NO₅S)^– · (H₅O₂)⁺ ( 2 ) were obtained by post‐processing the unreacted raw material to recycle. Furthermore, the rigidity and the conjugation effect of the aromatic system in compound 1 were increased through the coordination interactions of metal atoms to ligands, resulting in the emission coming from ligand enhanced with red‐shifting about 9 nm of the maximal wavelength. The conjugation effects and the steric arrangement of the substituent groups play the main role to the luminescence intensity and red‐shift effect.     

Synthesis of benzoxazine and 1,3-oxazine derivatives via ligand-free copper(I)-catalyzed one-pot cascade addition/cyclization reaction

A novel and efficient synthesis of benzoxazine and 1,3-oxazine derivatives via ligand-free copper(I)-catalyzed one-pot cascade addition/cyclization reaction has been developed. A variety of carbodiimides coupled with o-halophenylmethanols and/or substituted (Z)-3-iodoprop-2-en-1-ols to give the corresponding products in moderate to excellent yields under the mild condition.     

Neutron diffraction study of unusual phase separation in the antiperovskite nitride Mn3ZnN

The antiperovskite Mn(3)ZnN is studied by neutron diffraction at temperatures between 50 and 295 K. Mn(3)ZnN crystallizes to form a cubic structure at room temperature (C1 phase). Upon cooling, another cubic structure (C2 phase) appears at around 177 K. Interestingly, the C2 phase disappears below 140 K. The maximum mass concentration of the C2 phase is approximately 85% (at 160 K). The coexistence of C1 and C2 phase in the temperature interval of 140-177 K implies that phase separation occurs. Although the C1 and C2 phases share their composition and lattice symmetry, the C2 phase has a slightly larger lattice parameter (Δa ≈ 0.53%) and a different magnetic structure. The C2 phase is further investigated by neutron diffraction under high-pressure conditions (up to 270 MPa). The results show that the unusual appearance and disappearance of the C2 phase is accompanied by magnetic ordering. Mn(3)ZnN is thus a valuable subject for study of the magneto-lattice effect and phase separation behavior because this is rarely observed in nonoxide materials.     

Amperometric enzyme electrodes of glucose and lactate based on poly(diallyldimethylammonium)-alginate-metal ion-enzyme biocomposites

Sodium alginate (AlgNa) and poly(diallyldimethylammonium chloride) (PDDA) were mixed to obtain an interpenetrating polymer composite via electrostatic interaction and then cast on an Au electrode surface, followed by incorporation of metal ions (e.g. Fe³⁺ or Ca²⁺, to form AlgFe or AlgCa hydrogel) and glucose oxidase (GOx) (or lactate oxidase (LOx)), to prepare amperometric enzyme electrodes. The interactions of PDDA, Alg, and Fe³⁺ are studied by visual inspection as well as microscopic and electrochemical methods. Under optimized conditions, the PDDA-AlgFe-enzyme/Au and PDDA-AlgCa-enzyme/Au electrodes can give good analytical performance (e.g. nM-scale limit of detection of glucose or lactate, and sensitivities > 50 μA cm⁻² mM⁻¹) in the first-generation biosensing mode, which are better than the reported analogs using typical polysaccharide biopolymers as enzyme-immobilization matrices. The enzyme electrodes also worked well in the second-generation biosensing mode in the coexistence of p-benzoquione or ferrocene monocarboxylic acid artificial mediator. Biofuel cells (BFCs) with the enzyme electrodes as the bioanodes and glucose (or lactate) as the biofuel were also fabricated with satisfactory results. The proposed protocols for preparation of high performance Alg-based biocomposites may find wide applications in bioanalysis.     

Correlation of Oscillation Cycles and Crystallization in HDPE Blends with Small Amounts of HMWPE Prepared by Dynamic-Packing Injection Molding

The effect of oscillation cycles on crystal morphology was investigated for high-density polyethylene (HDPE) in blends with 4 wt% high molecular weight polyethylene (HMWPE) (labeled B4) in samples prepared through dynamic-packing injection molding (DPIM). With the aid of differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), a weblike shish-kebab morphology that markedly increased stiffness and toughness was found at a specific oscillation cycle. The DSC and SEM results showed that crystal morphology was altered with changes in the oscillation cycle. The SEM and TEM results showed that a much better weblike shish-kebab structure, in which most of the lamellae connect different columns compared with conventional shish-kebabs, was formed in the B4 samples when the oscillation cycle was 10s. These results show that a proper oscillation cycle favors the improvement of crystal structures in HDPE blends induced by a small amount of HMWPE.