Bioinspired Design of a Giant [Mn86] Nanocage-Based Metal-Organic Framework with Specific CO2 Binding Pockets for Highly Selective CO2 Separation

Adsorption-based removal of carbon dioxide (CO₂) from gas mixtures has demonstrated great potential for solving energy security and environmental sustainability challenges. However, due to similar physicochemical properties between CO₂ and other gases as well as the co-adsorption behavior, the selectivity of CO₂ is severely limited in currently reported CO₂-selective sorbents. To address the challenge, we create a bioinspired design strategy and report a robust, microporous metal–organic framework (MOF) with unprecedented [Mn₈₆] nanocages. Attributed to the existence of unique enzyme-like confined pockets, strong coordination interactions and dipole-dipole interactions are generated for CO₂ molecules, resulting in only CO₂ molecules fitting in the pocket while other gas molecules are prohibited. Thus, this MOF can selectively remove CO₂ from various gas mixtures and show record-high selectivities of CO₂/CH₄ and CO₂/N₂ mixtures. Highly efficient CO₂/C₂H₂, CO₂/CH₄, and CO₂/N₂ separations are achieved, as verified by experimental breakthrough tests. This work paves a new avenue for the fabrication of adsorbents with high CO₂ selectivity and provides important guidance for designing highly effective adsorbents for gas separation.     

Separation and purification of quinolyridine alkaloids from seeds of Thermopsis lanceolata R. Br. by conventional and pH-zone-refining counter-current chromatography

In this work, the preparative separation of quinolyridine alkaloids from seeds of T. lanceolata by conventional and pH-zone-refining counter-current chromatography. Traditional counter-current chromatography separation was performed by a flow-rate changing strategy with a solvent system of ethyl acetate-n-butanol-water (1:9:10, v/v) and 200 mg sample loading. Meanwhile, the pH-zone-refining mode was adopted for separating 2.0 g crude alkaloid extracts with the chloroform-methanol-water (4:3:3, v/v) solvent system using the stationary and mobile phases of 40 mM hydrochloric acid and 10 mM triethylamine. Finally, six compounds, including N-formylcytisine (two conformers) ( 1 ), N-acetycytisine (two conformers) ( 2 ), (-)-cytisine ( 3 ), 13-β-hydroxylthermopsine ( 4 ), N-methylcytisine ( 5 ), and thermopsine ( 6 ) were successfully obtained in the two counter-current chromatography modes with the purities over 96.5%. Moreover, we adopted nuclear magnetic resonance and mass spectrometry for structural characterization. Based on the obtained findings, the pH-zone-refining mode was the efficient method to separate quinolyridine alkaloids relative to the traditional mode.     

Improved Electrocatalytic Activity and Stability by Single Iridium Atoms on Iron-based Layered Double Hydroxides for Oxygen Evolution

Full understanding to the origin of the catalytic performance of a supported nanocatalyst from the points of view of both the active component and support is significant for the achievement of high performance. Herein, based on a model electrocatalyst of single-iridium-atom-doped iron (Fe)-based layered double hydroxides (LDH) for oxygen evolution reaction (OER), we reveal the first completed origin of the catalytic performance of such supported nanocatalysts. Specially, besides the activity enhancement of Ir sites by LDH support, the stability of surface Fe sites is enhanced by doped Ir sites: DFT calculation shows that the Ir sites can reduce the activity and enhance the stability of the nearby Fe sites; while further finite element simulations indicate, the stability enhancement of distant Fe sites could be attributed to the much low concentration of OER reactant (hydroxyl ions, OH⁻) around them induced by the much fast consumption of OH⁻ on highly active Ir sites. These new findings about the interaction between the main active components and supports are applicable in principle to other heterogeneous nanocatalysts and provide a completed understanding to the catalytic performance of heterogeneous nanocatalysts.     

Host–Guest Doping in Flexible Organic Crystals for Room-Temperature Phosphorescence

Organic single crystals (OSCs) with excellent flexibility and unique optical properties are of great importance due to their broad applicability in optical/optoelectronic devices and sensors. Nevertheless, fabricating flexible OSCs with room-temperature phosphorescence (RTP) remains a great challenge. Herein, we propose a host–guest doping strategy to achieve both RTP and flexibility of OSCs. The single-stranded crystal is highly bendable upon external force application and can immediately return to its original straight shape after removal of the stress, impressively emitting bright deep-red phosphorescence. The theoretical and experimental results demonstrate that the bright RTP arises from Förster resonance energy transfer (FRET) from the triphenylene molecules to the dopants. This strategy is both conceptually and synthetically simple and offers a universal approach for the preparation of flexible OSCs with RTP.     

Synthesis of Fibrous Phosphorus Micropillar Arrays with Pyro-Phototronic Effects

The bottom-up preparation of two-dimensional material micro-nano structures at scale facilitates the realisation of integrated applications in optoelectronic devices. Fibrous Phosphorus (FP), an allotrope of black phosphorus (BP), is one of the most promising candidate materials in the field of optoelectronics with its unique crystal structure and properties.^[1] However, to date, there are no bottom-up micro-nano structure preparation methods for crystalline phosphorus allotropes.^{[1c, 2]} Herein, we present the bottom-up preparation of fibrous phosphorus micropillar (FP-MP) arrays via a low-pressure gas-phase transport (LP-CVT) method that controls the directional phase transition from amorphous red phosphorus (ARP) to FP. In addition, self-powered photodetectors (PD) of FP-MP arrays with pyro-phototronic effects achieved detection beyond the band gap limit. Our results provide a new approach for bottom-up preparation of other crystalline allotropes of phosphorus.     

Insight into Iron Leaching from an Ascorbate-Oxidase-like Fe−N−C Nanozyme and Oxygen Reduction Selectivity**

Ascorbate (H₂A) is a well-known antioxidant to protect cellular components from free radical damage and has also emerged as a pro-oxidant in cancer therapies. However, such “contradictory” mechanisms underlying H₂A oxidation are not well understood. Herein, we report Fe leaching during catalytic H₂A oxidation using an Fe−N−C nanozyme as a ferritin mimic and its influence on the selectivity of the oxygen reduction reaction (ORR). Owing to the heterogeneity, the Fe-N_x sites in Fe−N−C primarily catalyzed H₂A oxidation and 4 e⁻ ORR via an iron-oxo intermediate. Nonetheless, trace O₂⋅⁻ produced by marginal N−C sites through 2 e⁻ ORR accumulated and attacked Fe-N_x sites, leading to the linear leakage of unstable Fe ions up to 420 ppb when the H₂A concentration increased to 2 mM. As a result, a substantial fraction (ca. 40 %) of the N−C sites on Fe−N−C were activated, and a new 2+2 e⁻ ORR path was finally enabled, along with Fenton-type H₂A oxidation. Consequently, after Fe ions diffused into the bulk solution, the ORR at the N−C sites stopped at H₂O₂ production, which was the origin of the pro-oxidant effect of H₂A.     

钾改性氧化铝基羰基硫水解催化剂及其失活机理

天然气、油田伴生气、高炉煤气等化工生产过程中伴生COS气体,不仅会腐蚀管道和毒害催化剂,还会严重污染环境并危害人类健康。COS催化水解反应可在温和条件下高效的将COS脱除,是最具应用前景的COS脱除技术之一。碱金属元素因其具有独特的电子供体性质、表面碱性和静电吸附等特性,常被用作助催化剂以提高Al₂O₃的COS催化水解性能。近年来,以钾为助剂改性的Al₂O₃催化剂(K₂CO₃/Al₂O₃)在COS催化水解反应中得到广泛的应用,但由于负载在Al₂O₃上的K物种的组成复杂,目前研究者对K₂CO₃/Al₂O₃催化剂上COS水解机理的理解仍存在一定的困惑和争议。本论文通过湿法浸渍法合成出一系列钾盐和钠盐改性的Al₂O₃催化剂,并利用各类先进的表征技术对这些催化剂进行分析。活性测试表明,以K₂CO₃、K₂C₂O₄、NaHCO₃、Na₂CO₃和NaC₂O₄改性Al₂O₃催化剂均有助于COS的水解。其中K₂CO₃/Al₂O₃拥有最佳的COS水解性能,连续运行20 h后其COS转化率仍高于~93%,远远优于未改性的Al₂O₃ (~58%)。我们利用原位红外光谱和X射线光电子能谱探明了反应过程中催化剂的化学结构特征,阐明了H₂O分子在K₂CO₃/Al₂O₃上的水解作用机制。原位红外表明COS在K₂CO₃/Al₂O₃上的水解过程中形成了硫代碳酸氢盐中间产物。X射线光电子能谱表征证明催化剂的失活主要是因为催化剂表面积累了硫酸盐和单质硫。此外,我们还研究了水蒸气含量对COS水解性能的影响,研究发现,由于H₂O和COS分子在催化剂表面存在竞争吸附,过量的H₂O会引起催化活性的下降。上述研究表明,K₂CO₃/Al₂O₃催化剂上COS水解性能的提高主要是形成了HO-Al-O-K界面活性位。更为重要的是,所制备的催化剂都是在模拟工业工况条件下进行的,这为后续的工业应用提供了宝贵理论指导。本工作为理解助剂钾在Al₂O₃催化剂上COS水解活性的增强提供了新的见解,这为未来设计稳定高效的COS水解催化剂打开了新的发展方向。     

Visible-Light Photoredox-Catalyzed Acyl Lactonization of Alkenes with Acyl Chlorides

A photocatalytic acyl lactonization of unsaturated carboxylic acids using simple and inexpensive acyl chlorides has been developed for a modular synthesis of acyl lactones. Significantly, the simple protocol could allow an efficient construction of biologically important phthalide framework. The transformation could be extended to a wide variety of unsaturated carboxylic acids, including substituted 2-vinyl benzoic acids and different types of alkenoic acids. Moreover, a series of aroyl, heteroaroyl chlorides could serve as coupling partners. Notably, functional groups including MeO, F, Cl and Br could survive. It is believed that acyl radicals generated from acyl chlorides under photoredox catalysis reacted with alkenes via atom-transfer radical addition (ATRA) and triggered subsequent lactonization in the process. Preliminary mechanistic investigations revealed that the transformation probably proceeded through a free radical pathway.     

Facile synthesis of ordered mesoporous molybdenum carbide electrocatalysts for high-performance hydrogen evolution reaction

In this study, a simple method was designed to prepare ordered mesoporous carbons embedded with molybdenum without any extreme conditions. We prepared three different ordered molybdenum carbide materials with mesoporous structures to explore the influence of the structure of molybdenum-based materials on the HER catalytic efficiency. The ordered mesoporous molybdenum carbide catalysts (CMK-3-MoCx, fCMK-3-MoCx, CMK-8-MoCx) were characterized by SEM, TEM, XRD, nitrogen adsorption-desorption and XPS. The HER is catalyzed efficiently on the three electrocatalysts, fCMK-3-MoCx shows the best HER electro-catalytic performance with a small onset potential of −0.06 V vs. RHE, a low tafel slope of 66 mV dec⁻¹ and a small over-potential value of 89 mV at 10 mA cm⁻². This excellent performance on HER is due to its high specific surface area and highly ordered mesoporous structure that resulted in excellent proton transport efficiency and high electron transfer rate. Our results provide a new research direction for the application of flat ordered mesoporous structures in catalysis.     

Rapid extraction of bioactive compounds from gardenia fruit using new and recyclable deep eutectic solvents

The utilization of deep eutectic solvent as an alternative and environmentally friendly option has gained significant attention. This study first proposed a series of benzylammonium chloride based-deep eutectic systems for the extraction of bioactive compounds from Gardenia jasminoides Ellis. Through the implementation of response surface methodology, the optimal solvent was determined to be dodecyldimethylbenzylammonium chloride–levulinic acid (1:3, mol/mol) with 35% (v/v) water, specifically tailored to extract geniposide, genipin-1-β-d -gentiobioside, crocin-1, and crocin-2 from gardenia fruits with the ratio of solid to liquid of 1:20 at 86°C for 16 min. Their total extraction yields could reach 70.6 mg/g, outperforming those obtained by other solvents and corresponding techniques. Furthermore, the eutectic system was retrieved after first-cycle extraction, and then applied in the subsequent extraction progress, yielding a consistent extraction efficiency of 97.1%. As compared to previous traditional methods, a quick, high-yielding, and green extraction procedure was achieved through simple heating settings that did not constrain the instrument. Therefore, dodecyldimethylbenzylammonium chloride–levulinic acid could serve as a sustainable and reusable solvent for efficient extraction of natural bioactive compounds from plant-based raw materials. The application of deep eutectic solvents has demonstrated their potential as designable solvents with stronger extraction capabilities than traditional organic solvents.