体积排阻色谱-电感耦合等离子体质谱分析富硒大米含硒蛋白组成

建立体积排阻色谱-电感耦合等离子体质谱(SEC-HPLC-ICP-MS)联用技术分析富硒大米含硒蛋白组成方法。通过水提、盐提、碱提和醇提方法提取,并用丙酮沉淀蛋白,硒的回收率分别为9.6%,16.8%,48.2%和14.9%,纯化后的蛋白结合硒的量由大到小依次为碱溶谷蛋白>球蛋白>醇溶蛋白>清蛋白。蛋白液经SEC-HPLC-ICP-MS检测,通过蛋白色谱峰(λ=280 nm)和ICP-MS硒峰(78Se)对比分析,利用分子量标准曲线测定出4类蛋白中含硒蛋白的分子量。结果表明,富硒大米中清蛋白和醇溶蛋白并不是硒的主要存在蛋白。硒主要存在于>7 kDa的碱溶谷蛋白和球蛋白,其中碱溶含硒蛋白主要组分F1分子量为199.8 kDa。     

SAPO-11分子筛晶化过程研究

采用X射线衍射、X射线荧光光谱、扫描电镜和固体核磁等方法研究了SAPO-11分子筛的水热晶化过程.结果表明,晶化初期,SAPO-11和一种具有磷硅铝组成的未知晶相同时生成;随着晶化的进行,中间相溶解,SAPO-11的生成速率大大增加,呈现快速晶化的特征;至2.33h后,SAPO-11的结晶度接近100%,并保持至晶化结束.硅从晶化初期即参与了SAPO-11的形成,它在晶体中的含量随晶化时间的延长而逐渐增加.硅原子主要以硅岛的形式分布于SAPO-11分子筛骨架中,从而导致多种硅配位环境的存在.分析显示,SAPO-11分子筛呈现外表面富硅的特点,结合晶化过程的分析可推测,硅在SAPO-11分子筛晶体中的分布不均匀,其含量从内向外递增.     

Efficient white emitting copolymers based on bipolar fluorene-co-dibenzothiophene-S,S-dioxide-co-carbazole backbone

Efficient white light emitting polymers were synthesized based on poly(9,9-dioctylfluorene-co-dibenzothiophene-S,S-dioxide) as blue emitter and a bisphenylamine functionalized 2,1,3-benzothiadiazole (DPABT) as red emitter. It was found that the incorporation of hole-transporting carbazole moiety into polymer main chain could effectively reduce the hole injection barriers, which can lead to distinctly improved charge balance in the emissive layer. Additionally, the hole-transporting carbazole units may form efficient bipolar host with electron-transporting dibenzothiophene-S,S-dioxide units. The white light emitting diodes based on single polymer PFSOCzDPABT showed the maximum luminous efficiency of 3.3 cd/A with the maximum luminance of 10282 cd/m2 , and the luminous efficiency showed only 24% roll off at current density of 400 mA/cm2 . These Commission Internationale d’Enclairage (CIE) coordinates of the devices changed slightly with the driving voltages increasing from 8 V to 12 V, and were very close to National Television System Committee (NTSC) standard white light emission of (0.33, 0.33). The results indicated that the incorporating bipolar host and low band gap DPABT unit was a promising way to achieve efficient single white light emitting copolymers.     

碳纳米管担载纳米Ir催化生物质基乙酰丙酸合成γ-戊内酯

以碳纳米管(CNTs)担载Ir纳米粒子为催化剂进行生物质基平台化合物乙酰丙酸(LA)选择加氢制备γ-戊内酯(GVL)的研究,并利用X射线衍射、X射线光电子能谱和透射电镜表征了使用前后的Ir/CNT催化剂,探讨了影响LA催化加氢制GVL反应性能的因素和该反应的可能路径.结果表明,与Ru,Rh和Pd等传统铂族金属相比,Ir/CNT催化剂不但可在温和条件下(50℃,2.0 MPa,H₂)实现LA至GVL的完全转化,且可对多类直接源于生物质水解的含等量LA/甲酸的“真实”体系实现GVL的高效选择合成.     

Synthesis and Crystal Structure of Novel Mixed-metal Alkoxide Clusters of Ytterbium and Sodium: Yb4O4（OiPr）16Na12

The mixed-metal cluster Yb4O4(OiPr)16Na12 has been synthesized and structurally determined by IR, elemental analysis, and single-crystal X-ray diffraction. The crystal belongs to the cubic system, space group P23 with a = b = c = 13.9788(3), V = 2731.55(10)3 , Z = 1, Dc = 1.202 g/cm 3 , Mr = 1977.42, = 3.480 mm-1 , F(000) = 972, the final R = 0.0288 and wR = 0.1511 for 1677 observed reflections with Ⅰ > 2σ(Ⅰ). X-ray analysis reveals that Yb4O4 (OiPr)16Na12 is centrosym-metric and the structure contains four ytterbium metals and twelve sodium metals, and each ytterbium atom is coordinated by six oxygen atoms. In addition, an ancillary computational analysis of the optimized molecular unit was provided. The large energy gap (3.31 eV) between HOMO and LUMO indicates that the structure framework is particularly stable.     

Preparation of single-hole hollow polymer nanospheres by raspberry-like template method

Single-hole hollow polymer nanospheres were fabricated by raspberry-like template method using "graft-from" strategy through atom transfer radical polymerization (ATRP). Nanometer-sized silica spheres were covalently attached onto the surfaces of micrometer-sized silica spheres. Crosslinked polymer shells on the nano-sized spheres outside the attached area were formed by "graft-from" strategy through ATRP. After removal of the silica cores, single-hole hollow crosslinked polymer nanospheres were obtained. In this strategy, most of ATRP monomers may be used and thus many functional groups can be easily incorporated into the single-hole hollow crosslinked polymer nanospheres.     

Oriented polymer dispersed discotic liquid crystals

Polymer dispersed discotic liquid crystals (PDDLCs) were prepared using the hexa-n-octanoate of rufigallol (RHO) and three polymer matrices: polystyrene (PS), poly(methyl methacrylate) (PMMA) and poly(ethyl methacrylate) (PEMA). The molecular orientation of RHO in stretched PDDLC films was characterized by means of infrared dichroism. It was found that the stretching of films that contain RHO in both the columnar D1 and crystalline phase can effectively align columns of RHO along the stretching direction, with the short axes of the rigid cores lying in the plane of the film. By contrast with stretched polymer dispersed nematic liquid crystals, no orientation of RHO is induced for films stretched with RHO in the isotropic phase, followed by rapid cooling to room temperature. However, if stretched films are cooled under strain into the columnar D1 phase, orientation of RHO can develop with time.     

Silaffin Peptides as a Novel Signal Enhancer for Gravimetric Biosensors

Application of biomimetic silica formation to gravimetric biosensors has been conducted for the first time. As a model system, silaffin peptides fused with green fluorescent protein (GFP) were immobilized on a gold quartz crystal resonator for quartz crystal microbalances using a self-assembled monolayer. When a solution of silicic acid was supplied, silica particles were successfully deposited on the Au surface, resulting in a significant change in resonance frequency (i.e., signal enhancement) with the silaffin–GFP. However, frequency was not altered when bare GFP was used as a control. The novel peptide enhancer is advantageous because it can be readily and quantitatively conjugated with sensing proteins using recombinant DNA technology. As a proof of concept, this study shows that the silaffin domains can be employed as a novel and efficient biomolecular signal enhancer for gravimetric biosensors.     

Controlled radical emulsion polymerization of polystyrene

In this paper, a new water-soluble initiator system, 2-bromopropane/CuSO₄/sodium ascorbate, was used as the initiator for emulsion polymerization. Radical emulsion polymerization of styrene was successfully carried out at 80 °C by using sodium dodecylbenzenesulfonate as the emulsifier. The 2-bromopropane/CuSO₄/sodium ascorbate-initiated emulsion polymerization shows the controlled free-radical polymerization features with linear growth of molecular weight. Polystyrene with a relatively high molecular weight and a narrow molecular weight distribution can be synthesized by this method. On the other hand, stable polystyrene latex can be obtained, and the size of the polystyrene latex increased with the increase in monomer conversion.     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.