A new C21-steroidal glycoside from Cynanchum stauntonii

A new C21-steroidal glycoside with two known compounds were isolated from the root of Cynanchum Stauntonii.Based on thespectral analysis,including MS,1H NMR,13C NMR,DEPT,1H-1H COSY,13C-1H COSY,HMQC and HMBC,their chemicalstructures were determinated as glaucogenin-C 3-O-a-L-cymaropyranosyl-(1→4)-b-D-digitoxopyranosyl-(1→4)-β-D-canaropyranoside(1),stigmasterol(2)and ursolic acid(3).     

选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

Activation of Carbon Dioxide and Synthesis of Propylene Carbonate

Cycloaddition of carbon dioxdie and propylene oxide to propylene carbonate catalyzed by tetra-tert-butyl metal phthalocyanine in the presence of tributylamine(TBA) shows higher yield than catalyzed by unsubstituted metal phthalocyanine.Comparing different catalysts of diverse metals,(t-Bu)4PcMg is more active than (t-Bu)PcFe ,But(t-Bu)4PcCo and (t-Bu)4PcNi only have low catalytic activities towards the reaction.Moreover,the yield will increase as the temperature increases.     

Host-guest complexes of cucubit[8]uril with phenanthrolines and some methyl derivatives

Cucurbituril a molecular container (or host) has a rigid hollow interior cavity which is large enough to accommodate, one or more, smaller molecules (or guests). The cavity is accessible through two carbonyl portal openings. Molecules or guests enter the …     

Synthesis and Characterization of Tetraosmium Carbonyl Complexes Containing a Bridging CO2 Ligand

Treatment of (thd)H (thd=2,2,6,6-tetramethyl-3,5-heptandionate) with excess Os₃(CO)₁₂ in an autoclave at 180°C gives the formation of a brown metal chain complex [Os₂(CO)₅(thd)₂]₂ (1) and a yellow CO₂ cluster complex [Os₄(-H)(-CO₂)(thd)(CO)₁₃] (2) in low yields. Complex 2 was fully identified by a combination of spectroscopic methods and X-ray diffraction study, showing a unique CO₂ ligand bridging a triosmium metal fragment, Os₃(-H)(CO)₁₀ and a monometallic osmium fragment, Os(CO)₃(thd). Upon treatment of 1 with Me₃NO at an elevated temperature, oxidation of the CO ligand occurred at the position trans to the unique CO₂ ligand on the Os(CO)₃(thd) fragment, giving the formation of a second CO₂ cluster [Os₄(-H)(-CO₂)(thd)(CO)₁₂(NCMe)] (3), which is stabilized by a weakly coordinated acetonitrile molecule.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.     

CuO／活性炭和Fe2O3／活性炭催化还原NO

ＣｕＯ／活性炭和Ｆｅ_２Ｏ_３／活性炭催化还原ＮＯ高志明，赵震，杨向光，吴越（中国科学院长春应用化学研究所长春１３００２２）关键词活性炭，还原，ＮＯ，氧化铜，氧化铁目前，对固定源的ＮＯ处理是采用Ｖ２Ｏ５／ＴｉＯ２作催化剂，ＮＨ３作还原剂的选择催化还原方...     

新疆阿克提什坎金矿床稀土元素地球化学研究

研究了新疆阿尔泰特地区阿克提什坎金矿床的稀土元素及矿区二长花岗岩平衡的热液中稀土元素的组成特征及配分模型，并应用Grang等位线方法讨论了热液蚀变作用过程中稀土元素的行为。研究表明，在热液蚀变作用过程中，稀土元素保持惰性，成矿热液与岩浆热液关系不大，成矿物质主要来源于围岩。