近5年化学奥林匹克(初赛)试题的分析及建议

从化学核心素养出发，分析近5年化学奥林匹克（初赛）试题考查的学生知识水平、能力水平、素养水平，并针对培养中学生核心素养的教学实践提出建议。     

甲基丙烯酸二甲氨基乙酯类离子液体 对Q235钢的缓蚀性能

以甲基丙烯酸二甲氨基乙酯为母体、 对氯甲基苯乙烯为季铵化试剂, 合成了一种具有疏水结构的甲基丙烯酸二甲氨基乙酯型离子液体(DEMA). 通过失重实验、 电化学分析、 原子力显微镜(AFM)、 接触角测试和量子化学计算等研究了DEMA在1 mol/L盐酸中对Q235钢的缓蚀性能, 并揭示了其在Q235钢表面的吸附行为和吸附机理. 失重实验结果表明, DEMA在盐酸中对Q235钢具有优异的缓蚀效果, 且在较高温度(60 ℃)下也能保持高效吸附; 电化学实验结果与失重测试结果一致; 接触角测试结果表明, DEMA可明显增强Q235钢表面的疏水性; 分析热力学参数可知, DEMA在Q235钢表面的吸附为自发、 放热过程, 符合Langmuir等温式, 且以化学吸附为主; 量子化学计算结果证实DEMA的结构中包含大量吸附活性位点.     

钒钨酸盐-CdS纳米粒子复合膜的制备与电致变色性能

通过层-层自组装方法制备了由Dawson结构三钒取代型钨酸盐1-K₉P₂W₁₅V₃O₆₂·18H₂O(P₂W₁₅V₃)与CdS纳米粒子构筑的复合膜材料, 研究了CdS纳米粒子添加和复合膜层数对P₂W₁₅V₃多酸复合膜材料电致变色性能的影响. 采用UV, XRD, SEM和循环伏安等测试手段对复合材料的结构和性能进行了表征; 将电化学工作站和紫外-可见吸收光谱联用, 在-1.0~+1.0 V的电压范围内, 对不同层数、 有无CdS纳米粒子复合的的膜材料的电致变色性能进行研究. 研究结果表明, 20层的复合膜材料性能最佳, 光反差为38.05%, 着色时间为3.57 s, 褪色时间为6.94 s, 最大着色效率达到94.04 cm²/C, 实现了从无色、 蓝色到蓝紫色, 再到无色的可逆颜色变化, 相对于单独P₂W₁₅V₃膜, 光反差提高46.07%, 着色效率提高96.53%, 电致变色性能显著提高.     

烷基苯磺酸盐表面活性剂对水合硅酸钙形貌和结构的影响

利用十二烷基苯磺酸钠(SDBS)为模板剂, 研究了SDBS的浓度、 Ca ²⁺和Si {\mathrm{O}}_3^{2-} 离子的浓度、 是否搅拌和反应时间等条件对水合硅酸钙(CSH)形貌特征和分散性能的影响, 并提出了不同CSH球壳形貌特征的形成机理. 结果显示, 溶液中Na₂SiO₃·9H₂O浓度增大、 SDBS浓度增大及反应时间延长均会使CSH的结晶度变好, 聚合度增大, Q ²结构的相对含量增加, 其中Na₂SiO₃·9H₂O和SDBS浓度是主要控制因素. SDBS在溶液中形成的球形胶束具有极强的模板作用, 能有效改变CSH的结晶生长方式; 通过调节SDBS浓度和钙硅比例, 并适当延长CSH的生长时间, 能够获得球壳完整、 分散性好且稳定性强的CSH.     

高师化学微格教学二级指导模式的构建与实施

依据实践共同体和情境学习理论,构建了由研究生辅助指导的高师化学微格教学二级指导模式,并提出了相应的教学策略。研究生担任微格训练组组长,在导师指导下具体负责本科生平时的备课和教学训练。实践研究结果表明,该模式解决了普遍存在的微格训练课时少、师资不足、资源不足等问题,提高了本科生的教学设计能力和课堂教学技能。     

A novel intumescent flame retardant imparts high flame retardancy to epoxy resin

Intumescent flame retardant (IFR) has received the considerable attention ascribed to the inherent advantages including non‐halogen, low toxicity, low smoke release and environmentally friendly. In this work, a novel charring agent poly (piperazine phenylaminophosphamide) named as PPTA was successfully synthesized and characterized by Fourier transform infrared spectra (FTIR) and X‐ray photoelectron spectroscopy (XPS). Then, a series of flame‐retardant EP samples were prepared by blending with ammonium polyphosphate (APP) and PPTA. Combustion tests include oxygen Index (LOI), vertical Burning Test (UL‐94) and cone calorimeter testing,these test results showed that PPTA greatly enhances the flame retardancy of EP/APP. According to detailed results, EP containing 10 wt% APP had a LOI value of 30.2%,but had no enhancement on UL‐94 rating. However, after both 7.5 wt% APP and 2.5 wt% PPTA were added, EP‐7 passed UL‐94 V‐0 rating with a LOI value of 33.0%. Moreover, the peak heat release rate (PHRR) and peak of smoke product rate (PSPR) of EP‐7 were greatly decreased. Meanwhile, the flame‐retardant mechanism of EP‐7 was investigated by scanning electron microscopy (SEM), thermogravimetric analysis/infrared spectrometry (TG‐IR) and X‐ray photoelectron spectroscopy (XPS). The corresponding results presented PPTA significantly increased the density of char layer, resulting in the good flame retardancy.     

Combined effect of chemically compound graphene oxide‐calcium pimelate on crystallization behavior,morphology and mechanical properties of isotactic polypropylene

The combined nucleation effect of graphene oxide (GO) and calcium pimelate (CaPi) which are chemically compound together (expressed in GO ? CaPi) in isotactic polypropylene (iPP) was investigated. Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA) verified that CaPi was chemically compound with GO by chelate bonds. The crystallization behavior and crystalline morphologies of iPP nucleated with different mass ratio of GO and CaPi were investigated. The crystallization peak temperature of iPP nucleated with 0.2 wt% GO ? CaPi with the mass ratio of 1:5 (GO1 ? C5) was increased by 8.3°C when compared with that of pure iPP, and the relative content of β‐crystal reached up to 0.7962. Whereas, the crystallization peak temperature of iPP nucleated with 0.2 wt% GO and CaPi which are blended together by mechanical force (expressed in GO + CaPi) with the mass ratio of 1:5 (GO1 + C5) was only increased by 5.0°C. It was attributed to that the aggregation of GO + CaPi caused the decrease of the crystallization peak temperature, while the GO1 ? C5 uniformly dispersed in the iPP matrix. Unexpectedly, the relative content of β‐crystal of iPP nucleated with 0.02 wt% GO1 ? C5 reached up to 0.8094, and the crystallization peak temperature was increased by 6.7°C compared with that of pure iPP. Meanwhile, the impact strength, tensile strength and heat deflection temperature of iPP nucleated with 0.02 wt% GO1 ? C5 increased by almost 45.86%, 2.03% and 7.7°C, respectively. The iPP nucleated with GO1 ? C5 obtained a balance between stiffness and toughness and the thermo‐mechanical property of nucleated iPP was improved.     

A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries Under Practical Conditions

High‐energy‐density Li metal batteries suffer from a short lifespan under practical conditions, such as limited lithium, high loading cathode, and lean electrolytes, owing to the absence of appropriate solid electrolyte interphase (SEI). Herein, a sustainable SEI was designed rationally by combining fluorinated co‐solvents with sustained‐release additives for practical challenges. The intrinsic uniformity of SEI and the constant supplements of building blocks of SEI jointly afford to sustainable SEI. Specific spatial distributions and abundant heterogeneous grain boundaries of LiF, LiN_xO_y, and Li₂O effectively regulate uniformity of Li deposition. In a Li metal battery with an ultrathin Li anode (33 μm), a high‐loading LiNi_0.5Co_0.2Mn_0.3O₂ cathode (4.4 mAh cm^?2), and lean electrolytes (6.1 g Ah^?1), 83 % of initial capacity retains after 150 cycles. A pouch cell (3.5 Ah) demonstrated a specific energy of 340 Wh kg^?1 for 60 cycles with lean electrolytes (2.3 g Ah^?1).     

Enhancing the Hydrogen Evolution Reaction Activity of Platinum Electrodes in Alkaline Media Using Nickel–Iron Clusters

Herein, we demonstrate an easy way to improve the hydrogen evolution reaction (HER) activity of Pt electrodes in alkaline media by introducing Ni–Fe clusters. As a result, the overpotential needed to achieve a current density of 10 mA cm^?2 in H₂‐saturated 0.1 m KOH is reduced for the model single‐crystal electrodes down to about 70 mV. To our knowledge, these modified electrodes outperform any other reported electrocatalysts tested under similar conditions. Moreover, the influence of 1) Ni to Fe ratio, 2) cluster coverage, and 3) the nature of the alkali‐metal cations present in the electrolyte on the HER activity has been investigated. The observed catalytic performance likely originates from both the improved water dissociation at the Ni–Fe clusters and the subsequent optimal hydrogen adsorption and recombination at Pt atoms present at the Ni–Fe/Pt boundary.     

Achieving Superior Electrocatalytic Performance by Surface Copper Vacancy Defects during Electrochemical Etching Process

Vacancy defects of catalysts have been extensively studied and proven to be beneficial to various electrocatalytic reactions. Herein, an ultra‐stable three‐dimensional PtCu nanowire network (NNW) with ultrafine size, self‐supporting rigid structure, and Cu vacancy defects has been developed. The vacancy defect‐rich PtCu NNW exhibits an outstanding performance for the oxygen reduction reaction (ORR), with a mass activity 14.1 times higher than for the commercial Pt/C catalyst (20 %.wt, JM), which is currently the best performance. The mass activity of the PtCu NNW for methanol oxidation reaction (MOR) is 17.8 times higher than for the commercial Pt/C catalyst. Density‐functional theory (DFT) calculations indicate that the introduction of Cu vacancies enhances the adsorption capacity of Pt atoms to the HO* intermediate and simultaneously weakens the adsorption for the O* intermediate. This work presents a facile strategy to assemble efficient electrocatalysts with abundant vacancy defects, at the same time, provides an insight into the ORR mechanism in acidic solution.