拉压性能不同材料的几种结构的极限分析

给出了拉压性能不同材料（简称具有Ｓ－Ｄ效应的材料）的几种结构的极限载荷公式。揭示出材料的拉压性能不同对几种结构承载能力的影响规律。所给出的极限载荷公式可供工程设计人员参考。     

拉压性能不同材料全量型本构关系及厚壁筒的应力分析

将经典全量理论作了推广，考虑了应力状态及塑性体积变形对拉压性能不同材料的塑性行为的影响。应用该本构模型分别计算了厚壁筒在内压和外压作用下的应力分布。给出了径向应力、环向应力和轴向应力沿壁厚的分布图。将本文的计算解与拉压性能相同(不考虑体积变形、强化曲线唯一)的幂函数强化材料的厚壁筒的理论解进行了比较。结果表明，材料的拉压性能不同对厚壁筒的环向应力和轴向应力影响较大。因此，对于拉压性能不同材料，考虑到其对应力状态及塑性体积变形敏感时，是不能将其简化成拉压性能相同、体积不可压缩、强化曲线唯一的理想材料。     

Statistical Analysis of the Effect of Intensity Pattern Noise on the Displacement Measurement Precision of Digital Image Correlation Using Self-correlated Images

This paper discusses the effect of intensity pattern noise on the displacement measurement precision of digital image correlation (DIC). Through mathematical deduction, a formula is presented to estimate the displacement measurement error caused by intensity pattern noise. The resulting formula synthetically reflects the effects of the variance of noise, the intensity variance and the subset size on the displacement measurement precision. To verify the correctness of the resulting formula, two experiments are done. The first one is a real self-correlation experiment, and aims to analyze the effect of the subset size, while the second is a numerical self-correlation experiment, and is to analyze to the effect of the different noise levels. The experimental results are in good agreement with the theoretical predictions. The project is supported by the National Science Foundation of China (10572103).     

Uniform persistence and flows near a closed positively invariant set

In this paper, the behavior of a continuous flow in the vicinity of a closed positively invariant subset in a metric space is investigated. The main theorem in this part in some sense generalizes previous results concerning classification of the flow near a compact invariant set in a locally compact metric space which was described by Ura-Kimura (1960) and Bhatia (1969). By applying the obtained main theorem, we are able to prove two persistence theorems. In the first one, several equivalent statements are established, which unify and generalize earlier results based on Liapunov-like functions and those about the equivalence of weak uniform persistence and uniform persistence. The second theorem generalizes the classical uniform persistence theorems based on analysis of the flow on the boundary by relaxing point dissipativity and invariance of the boundary. Several examples are given which show that our theorems will apply to a wider varity of ecological models.     

Determination of diflubenzuron and chlorbenzuron in fruits by combining acetonitrile‐based extraction with dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography

In this study, a simple and low‐organic‐solvent‐consuming method combining an acetonitrile‐partitioning extraction procedure followed by “quick, easy, cheap, effective, rugged and safe” cleanup with ionic‐liquid‐based dispersive liquid–liquid microextraction and high‐performance liquid chromatography with diode array detection was developed for the determination of diflubenzuron and chlorbenzuron in grapes and pears. Ionic‐liquid‐based dispersive liquid–liquid microextraction was performed using the ionic liquid 1‐hexyl‐3‐methylimidazolium hexafluorophosphate as the extractive solvent and acetonitrile extract as the dispersive solvent. The main factors influencing the efficiency of the dispersive liquid–liquid microextraction were evaluated, including the extractive solvent type and volume and the dispersive solvent volume. The validation parameters indicated the suitability of the method for routine analyses of benzoylurea insecticides in a large number of samples. The relative recoveries at three spiked levels ranged between 98.6 and 109.3% with relative standard deviations of less than 5.2%. The limit of detection was 0.005 mg/kg for the two insecticides. The proposed method was successfully used for the rapid determination of diflubenzuron and chlorbenzuron residues in real fruit samples.     

High-internal-phase-emulsion polymeric monolith coupled with liquid chromatography–electrospray tandem mass spectrometry for enrichment and sensitive detection of trace cytokinins in plant samples

High-internal-phase-emulsion polymers (polyHIPEs) show great promise as solid-phase-extraction (SPE) materials because of the tremendous porosity and highly interconnected framework afforded by the high-internal-phase-emulsion (HIPE) technique. In this work, polyHIPE monolithic columns as novel SPE materials were prepared and applied to trace enrichment of cytokinins (CKs) from complex plant samples. The polyHIPE monoliths were synthesized via the in-situ polymerization of the continuous phase of a HIPE containing styrene (STY) and divinylbenzene (DVB) in a stainless column, and revealed highly efficient and selective enrichment ability for aromatic compounds. Under the optimized experimental conditions, a method using a monolithic polyHIPE column combined with liquid chromatography–electrospray tandem mass spectrometry (LC–MS–MS) was developed for the simultaneous extraction and sensitive determination of trans-zeatin (tZ), meta-topolin (mT), kinetin (K), and kinetin riboside (KR). The proposed method had good linearity, with correlation coefficients (R ²) from 0.9957 to 0.9984, and low detection limits (LODs, S/N?=?3) in the range 2.4–47 pg mL^?1 for the four CKs. The method was successfully applied to the determination of CKs in real plant samples, and obtained good recoveries ranging from 68.8 % to 103.0 % and relative standard deviations (RSDs) lower than 16 %.     

A consensus successive projections algorithm – multiple linear regression method for analyzing near infrared spectra

The successive projections algorithm (SPA) is widely used to select variables for multiple linear regression (MLR) modeling. However, SPA used only once may not obtain all the useful information of the full spectra, because the number of selected variables cannot exceed the number of calibration samples in the SPA algorithm. Therefore, the SPA-MLR method risks the loss of useful information. To make a full use of the useful information in the spectra, a new method named “consensus SPA-MLR” (C-SPA-MLR) is proposed herein. This method is the combination of consensus strategy and SPA-MLR method. In the C-SPA-MLR method, SPA-MLR is used to construct member models with different subsets of variables, which are selected from the remaining variables iteratively. A consensus prediction is obtained by combining the predictions of the member models. The proposed method is evaluated by analyzing the near infrared (NIR) spectra of corn and diesel. The results of C-SPA-MLR method showed a better prediction performance compared with the SPA-MLR and full-spectra PLS methods. Moreover, these results could serve as a reference for combination the consensus strategy and other variable selection methods when analyzing NIR spectra and other spectroscopic techniques.     

Experimental Investigation on Binary Phase Diagram of the Thermotropic Phase Transitions Compounds (n‐CnH2n+1R3)2ZnCl4

The thermotropic phase transitions compounds (n‐C_nH_2n+1R₃)₂ZnCl₄ as well as a series of their binary mixtures were prepared by a solution reflux method from their ethanol solutions. The experimental subsolidus binary phase diagram of [n‐C₁₈H₃₇N(CH₃)₃]₂ZnCl₄‐[n‐(C₁₈H₃₇)₂N(CH₃)₂]₂ZnCl₄ is constructed over the entire composition range by differential scanning calorimetry(DSC) and X‐ray. Experi‐ mental results indicate one stable intermediate phase [n‐C₁₈H₃₇N(CH₃)₃] [n‐(C₁₈H₃₇)₂N(CH₃)₂]ZnCl₄ at W_C18C3Zn %=59.75 %, and two invariant three phase equilibria, which shows two eutectoid temperatures: Te₁ at 310±1 K for eutectoid point W_C18C3Zn %=36.24 %, Te₂ at 313±1 K for eutectoid point W_C18C3Zn %=80.17 %. These three noticeable solid‐solution ranges are α‐phase at the left, ?‐phase at the right, and ψ‐phase in the middle of the phase diagram. It is (n‐C_nH_2n+1R₃)₂ZnCl₄ systems as phase change materials that are characterized the phase transition temperatures T in the range of 310 to 340 K, the transition enthalpies ΔH in the range of 38.40 and 168.72 J/g between two polymorphic forms.     

Development and validation of polymerized high internal phase emulsion monoliths coupled with HPLC and fluorescence detection for the determination of trace tetracycline antibiotics in environmental water samples

A polymerized high internal phase emulsion monolith was used as a novel sorbent for solid‐phase extraction coupled with high‐performance liquid chromatography and fluorescence detection for the determination of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline in environmental water samples. The polymerized high internal phase emulsion monolithic column was prepared by the in situ polymerization of the continuous phase of a high internal phase emulsion containing glycidyl methacrylate, styrene, and divinylbenzene in pipette tips, and then functionalized with iminodiacetic acid. The resulting monolith exhibited highly interconnected porosity and large surface areas, making it an excellent candidate as an solid‐phase extraction sorbent for the enrichment of trace tetracycline antibiotics. Several factors affecting the extraction performance of polymerized high internal phase emulsion monoliths, including the pH of sample solution, the eluting solvents, the sample loading flow rate and volume, were investigated, respectively. Under the optimized conditions, the mean recoveries of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline spiked in pond and farm wastewater samples ranged from 78.1 to 119.3% with relative standard deviation less than 15%. The detection limits (S/N = 3) of the proposed method were in the range of 51–137 pg/mL. This study demonstrated that the monolithic polymerized high internal phase emulsion would be promising solid‐phase extraction sorbents in the extraction and proconcentration of trace analytes from complex samples.