Experimental study on the smoke temperature evolution in a polyethylene (PE)-lined compartment on fire

Smoke temperature evolution in the upper layer of compartment fire, which is critical for the prediction of potential flashover, was experimentally investigated in a real building. Three-millimeter polyethylene (PE) slabs attached on the internal walls were employed as the lining material to address the effect of the melting and combustion of the lining material on the smoke temperature. A corner gasoline pool fire was utilized as the fire source. Two thermocouple trees, mounted vertically at the center and the open door, and a high-definition camera were utilized to record the smoke temperature history and experimental video. Meanwhile, some furniture was loaded to study its enhancement feature on fire intensity. Heat release rates (HRRs) at different stages were analyzed based on MQH method (McCaffrey, Quintiere and Harkleroad) and pool fire theory. Smoke temperature was estimated through an improved MQH correlation considering the melting of the PE slabs and an empirical model, BFD curve (Barnett in Fire Saf J 37: 437–463, 2002) combined. The results show that both the maximum HRR and smoke temperature, 925.91 kW and 491.7 °C, are lower than the critical values of flashover. The PE lining greatly intensifies the fire power and the resulting smoke temperature compared with the ones in noncombustible wall scenario. Combustion of the molten PE flowing down from the walls would lead to a secondary peak in smoke temperature curve, which is rarely considered in previous work.

     

Extending the Sensitivity of CEST NMR Spectroscopy to Micro‐to‐Millisecond Dynamics in Nucleic Acids Using High‐Power Radio‐Frequency Fields

Biomolecules undergo motions on the micro‐to‐millisecond timescale to adopt low‐populated transient states that play important roles in folding, recognition, and catalysis. NMR techniques, such as Carr–Purcell–Meiboom–Gill (CPMG), chemical exchange saturation transfer (CEST), and R_1ρ are the most commonly used methods for characterizing such transitions at atomic resolution under solution conditions. CPMG and CEST are most effective at characterizing motions on the millisecond timescale. While some implementations of the R_1ρ experiment are more broadly sensitive to motions on the micro‐to‐millisecond timescale, they entail the use of selective irradiation schemes and inefficient 1D data acquisition methods. Herein, we show that high‐power radio‐frequency fields can be used in CEST experiments to extend the sensitivity to faster motions on the micro‐to‐millisecond timescale. Given the ease of implementing high‐power fields in CEST, this should make it easier to characterize micro‐to‐millisecond dynamics in biomolecules.     

A Hydrolytically Stable Vanadium(IV) Metal–Organic Framework with Photocatalytic Bacteriostatic Activity for Autonomous Indoor Humidity Control

Metal–organic frameworks (MOFs) with long‐term stability and reversible high water uptake properties can be ideal candidates for water harvesting and indoor humidity control. Now, a mesoporous and highly stable MOF, BIT‐66 is presented that has indoor humidity control capability and a photocatalytic bacteriostatic effect. BIT‐66 (V₃(O)₃(H₂O)(BTB)₂), possesses prominent moisture tunability in the range of 45–60 % RH and a water uptake and working capacity of 71 and 55 wt %, respectively, showing good recyclability and excellent performance in water adsorption–desorption cycles. Importantly, this MOF demonstrates a unique photocatalytic bacteriostatic behavior under visible light, which can effectively ameliorate the bacteria and/or mold breeding problem in water adsorbing materials.     

A Phototheranostic Strategy to Continuously Deliver Singlet Oxygen in the Dark and Hypoxic Tumor Microenvironment

Continuous irradiation during photodynamic therapy (PDT) inevitably induces tumor hypoxia, thereby weakening the PDT effect. In PDT‐induced hypoxia, providing singlet oxygen from stored chemical energy may enhance the cell‐killing effect and boost the therapeutic effect. Herein, we present a phototheranostic (DPPTPE@PEG‐Py NPs) prepared by using a 2‐pyridone‐based diblock polymer (PEG‐Py) to encapsulate a semiconducting, heavy‐atom‐free pyrrolopyrrolidone‐tetraphenylethylene (DPPTPE) with high singlet‐oxygen‐generation ability both in dichloromethane and water. The PEG‐Py can trap the ¹O₂ generated from DPPTPE under laser irradiation and form a stable intermediate of endoperoxide, which can then release ¹O₂ in the dark, hypoxic tumor microenvironment. Furthermore, fluorescence‐imaging‐guided phototherapy demonstrates that this phototheranostic could completely inhibit tumor growth with the help of laser irradiation.     

Designing a 0D/2D S‐Scheme Heterojunction over Polymeric Carbon Nitride for Visible‐Light Photocatalytic Inactivation of Bacteria

Constructing heterojunctions between two semiconductors with matched band structure is an effective strategy to acquire high‐efficiency photocatalysts. The S‐scheme heterojunction system has shown great potential in facilitating separation and transfer of photogenerated carriers, as well as acquiring strong photoredox ability. Herein, a 0D/2D S‐Scheme heterojunction material involving CeO₂ quantum dots and polymeric carbon nitride (CeO₂/PCN) is designed and constructed by in situ wet chemistry with subsequent heat treatment. This S‐scheme heterojunction material shows high‐efficiency photocatalytic sterilization rate (88.1 %) towards Staphylococcus aureus (S. aureus) under visible‐light irradiation (λ≥420 nm), which is 2.7 and 8.2 times that of pure CeO₂ (32.2 %) and PCN (10.7 %), respectively. Strong evidence of S‐scheme charge transfer path is verified by theoretical calculations, in situ irradiated X‐ray photoelectron spectroscopy, and electron paramagnetic resonance.     

Precisely Tuning Photothermal and Photodynamic Effects of Polymeric Nanoparticles by Controlled Copolymerization

Cancer possesses normoxic and hypoxia microenvironments with different levels of oxygen, needing different efficacies of photothermal and photodynamic therapies. It is important to precisely tune the photothermal and photodynamic effects of phototherapy nano‐agents for efficient cancer treatment. Now, a series of copolymeric nanoparticles (PPy‐Te NPs) were synthesized in situ by controlled oxidative copolymerization with different ratios of pyrrole to tellurophene by FeCl₃. The photothermal and photodynamic effects of semiconducting nano‐agents under the first near‐infrared (NIR) irradiation were precisely and systematically tuned upon simply varying the molar ratio of the pyrrole to tellurophene. The PPy‐Te NPs were used for cancer treatment in mice, exhibiting excellent biocompatibility and therapeutic effect. This work presents a simple method to tune photothermal and photodynamic therapies effect in semiconducting nano‐agents for cancer treatment.     

Palladium‐Catalyzed Asymmetric [8+2] Dipolar Cycloadditions of Vinyl Carbamates and Photogenerated Ketenes

Higher‐order cycloadditions, particularly [8+2] cycloadditions, are a straightforward and efficient strategy for constructing significant medium‐sized architectures. Typically, configuration‐restrained conjugated systems are utilized as 8π‐components for higher‐order concerted cycloadditions. However, for this reason, 10‐membered monocyclic skeletons have never been constructed via catalytic asymmetric [8+2] cycloaddition with high peri‐ and stereoselectivity. Here, we accomplished an enantioselective [8+2] dipolar cycloaddition via the merger of visible‐light activation and asymmetric palladium catalysis. This protocol provides a new route to 10‐membered monocyclic architectures bearing chiral quaternary stereocenters with high chemo‐, peri‐, and enantioselectivity. The success of this strategy relied on the facile in situ generation of Pd‐containing 1,8‐dipoles and their enantioselective trapping by ketene dipolarophiles, which were formed in situ via a photo‐Wolff rearrangement.     

Solvation Rule for Solid‐Electrolyte Interphase Enabler in Lithium‐Metal Batteries

Despite the exceptionally high energy density of lithium metal anodes, the practical application of lithium‐metal batteries (LMBs) is still impeded by the instability of the interphase between the lithium metal and the electrolyte. To formulate a functional electrolyte system that can stabilize the lithium‐metal anode, the solvation behavior of the solvent molecules must be understood because the electrochemical properties of a solvent can be heavily influenced by its solvation status. We unambiguously demonstrated the solvation rule for the solid‐electrolyte interphase (SEI) enabler in an electrolyte system. In this study, fluoroethylene carbonate was used as the SEI enabler due to its ability to form a robust SEI on the lithium metal surface, allowing relatively stable LMB cycling. The results revealed that the solvation number of fluoroethylene carbonate must be ≥1 to ensure the formation of a stable SEI in which the sacrificial reduction of the SEI enabler subsequently leads to the stable cycling of LMBs.     

Chemical profiling and marker characterization of Huangqin decoction prepared with three types of peony root by liquid chromatography with electrospray ionization mass spectrometry

Clarification of the quality and biological effect equivalence of traditional Chinese medicines containing multi‐origin species is essential to improve their current quality standards, and also is the core problem to clarify the origins of single herbs with multi‐species in Chinese formulas that will guarantee their clinical application. Huangqin decoction is the typical one of multi‐origin formulas frequently used in traditional Chinese medicine and Kampo medicine. An ultra high performance liquid chromatography with electrospray ionization–tandem mass spectrometry was developed for chemical profiling and marker quantification of Huangqin decoction prepared with two different original types of peony root, white and red peony root. Forty‐seven main peaks in chemical profiling of Huangqin decoction prepared with white and red peony root were identified: nine were from peony root, 20 from baical skullcap root, 17 from licorice root, and one from jujubae fruit. The markers characteristics of the respective types of peony root in Huangqin decoction differ from that in single herbs, especially in terms of monoterpenoids and hydrolysable tannins. Subsequently, 17 representative markers in Huangqin decoction prepared with three types of peony root and their chemical characteristics and content distribution were carried out.