关于双重时序AR-MA模型的相关结构及与ARMA模型的比较

本文在文［４］的基础上讨论了双重时序ＡＲ（１）－ＭＡ（ｑ）模型的相关结构，在不假定白噪声序列为正态的情况下，证明了安鸿志［２］关于模型的相关结构的猜想是正确的，具体地构造了ＡＲ（１）－ＭＡ（３）模型的相关结构，并与ＡＲＭＡ模型进行了初步的比较，给出了一些抛砖引玉的讨论．     

鸟嘌呤和次黄嘌呤的铜络合物的吸附作用和伏安特性研究

本文研究了鸟瞟呤(Gua)和次黄嘌呤(Hxa)铜络合物在悬汞电极(HMDE)上的吸附作用和电极反应机理,溶液中形成的1:1络合物有强烈吸附性,通过分子结构的比较,推断出Cu~(2+)与Gua和Hxa的咪唑环N(7)和外环氧O(6)原子结合形成封闭的五元环。嘌呤环的π-电子有使分子呈平面吸附的趋势,但是Gua络合物分子优先取“倾斜”定向;随着表面吸附浓度增加,Hxa络合物分子存在从“平面”向“垂直”的再定向作用。本文测定了单层吸附浓度、包含的电量和每个分子占据的面积。络合物吸附得到S形等温线,它与Frumkin吸附等温线接近。本文还列出有关吸附参数B、a、△G_A~O和θ~*的计算结果。     

一类泛函微分方程周期解的存在性与应用

本文给出了一类滞后型泛函微分方程有一个周期解的四个充分性定理，其结果明显地优于著名的Ｙｏｓｈｉｚａｗａ周期解定理，最后给出了应用实例。     

化学发光分析法测定绿原酸

本文基于碱性介质中绿原酸对鲁米诺-铁氰化钾化学发光体系的抑制作用,首次建立了绿原酸的化学发光分析法,并探讨了其作用机理。方便简便、迅速、重复性好、灵敏度高。采用该法可测定1.0×10-8g/ml～1.0×10-5g/ml范围内的绿原酸,其检出限达到5.2×10-9g/ml,回收率为104%.     

SPE电极上Pt单组分及Pt-Au双组分还原态CO_2阳极剥离电化学氧化行为研究

采用循环伏安法，对ＳＰＥＰｔ电极以及ＳＰＥＡｕ－Ｐｔ电极上还原态ＣＯ２的电化学氧化行为研究表明，此类电极的电化学特性与光滑Ｐｔ电极一致：ＣＯ２在氢原子吸附电位区０～２５０ｍＶ（ｖｓ．ＲＨＥ）处，可与电极上化学吸附的氢反应，生成还原态的ＣＯ２，通过线性扫描，还原态ＣＯ２即发生一不可逆电化学氧化过程（阳极剥离）．在ＳＰＥＰｔ系列及ＳＰＥＡｕ－Ｐｔ系列上ＣＯ２的电化学行为表明，当ＳＰＥＰｔ系列上Ｐｔ的载量为２．５ｍＬ的０．０１ｍｏｌ·Ｌ－１Ｈ２ＰｔＣｌ６的Ｐｔ时，对还原态ＣＯ２的电催化活性最好，当Ｐｔ的载量相同时，在ＳＰＥＡｕ－Ｐｔ上，催化剂对还原态ＣＯ２的电化学氧化行为比ＳＰＥＰｔ电极更强，这是由于预先沉积的Ａｕ对后沉积的Ｐｔ有调制作用．     

On the Kauffman skein modules

 Let k be a subring of the field of rational functions in α, s which contains α ^±1 ,s ^±1 . Let M be a compact oriented 3-manifold, and let K(M) denote the Kauffman skein module of M over k. Then K(M) is the k-module freely generated by isotopy classes of framed links in M modulo the Kauffman skein relations. In the case of , the field of rational functions in α, s, we give a basis for the Kauffman skein module of the solid torus and a basis for the relative Kauffman skein module of the solid torus with two points on the boundary. We then show that K(S ¹ × S ² is freely generated by the empty link, i.e., . Received: 20 October 2001 / Revised version: 20 March 2002     

Enhanced hardness in B-doped ZnO thin films on fused quartz substrates by pulsed-laser deposition

B-doped ZnO thin films have been fabricated on fused quartz substrates using boron-ZnO mosaic target by pulsed-laser deposition technique, and the mechanical properties have been studied by nanoindentation continuous stiffness measurement technique and transmission electron microscope (TEM). Nanoindentation measurement revealed that the hardness of B-doped ZnO films, 9.32 ± 0.90 to 12.10 ± 1.00 GPa, is much greater than that of undoped ZnO films and very close to that of traditional semiconductor Si. The mean transmittance (%) is larger than 81% in the visible range (380-780 nm) for all the films, and the Hall effect measurement showed that the carrier density is around 2 × 10²⁰ cm⁻³ and the resistivity lower than 3 × 10⁻³ Ω cm. TEM characteristics show undoped thin films have more amorphous area between grains while the B-doped ZnO films have thin grain boundaries. We suggest that the grain boundaries act as the strain compensation sites and the decrease in thickness of grain boundaries enhances the hardness of the B-doped ZnO films.     

First Total Synthesis of 12-Hydroxy-13-methylpodocarpa-9, 11, 13-trien-3-one

12-Hydroxy-13-methylpodocarpa-9, 11, 13-trien-3-one 9 was isolated from the twigs ofCroton salutaris1. Many diterpenes exhibit significant bioactivities, such as antibac-terial and antitumour and 9 has a rare structure. In order to study the relationshipb…     

The application of Hölder exponent to traffic congestion warning

In this paper, we applied multifractal modeling techniques to analyze the traffic data collected from the Beijing Yuquanying. The results indicated that multifractal characteristics obviously exist in the traffic system; the degree of fractality of these traffic data tends to increase as the traffic system becomes congested; the Hölder exponent that measures the local rate of fractality may be used as indicators to predict the presence of the traffic congestion.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.