Tuneable Sagnac comb filter including two wave retarders

In this paper we study theoretically and experimentally a wavelength-tuneable Sagnac birefringence filter. The device is a Sagnac interferometer including a symmetric fibre coupler and a length of high-birefringence fibre in the loop. A wave retarder is inserted at each end of the birefringent fibre for absolute wavelength tuning. We show theoretically that wavelength tuning through wave plate orientation ensuring constant amplitude of the filtering function is possible only if a minimum of two wave retarders are included in the setup. The position of the transmission peaks then varies linearly with the angle of one of the retarders and can be adjusted over one entire channel spacing. This happens only when a quarter-wave retarder and a half-wave retarder are used, if the former is oriented at 45° with respect to the fibre birefringence axes, while the orientation of the latter serves as the adjustment parameter. The theoretical predictions are confirmed by the experimental results.     

Excellent electrochemical performance of nitrogen-enriched hierarchical porous carbon electrodes prepared using nano-CaCO3 as template

Recently, tremendous research efforts have been concentrated on developing high-performance electrode materials to meet the ever-increasing energy and power demands in supercapacitors. Herein, we presented a high-capacity supercapacitor material based on nitrogen-enriched hierarchical porous carbons (NHPCs) synthesized by the carbonization of melamine formaldehyde resins using eco-friendly and inexpensive nano-CaCO₃ as template. The effects of carbonization temperature and template content on the porous structure and electrochemical characteristics were compared and discussed in detail. The prepared NHPCs possessed large surface area up to 834 m² g^?1 and high nitrogen content up to 20.94 wt %. As electrode material for supercapacitors, NHPCs exhibited superior electrochemical performances with high specific capacitance (190 F g^?1 at 20 A g^?1), outstanding rate capability (80 %), and excellent cycling stability (over 2,000 cycles at 5 A g^?1) in 1 M sulfuric acid media. The excellent electrochemical performances are due to the synergic effects of unique hierarchical porous microstructure, abundant nitrogen and oxygen functionalities, as well as high degree of graphitization framework.     

Asymmetric Synthesis of Novel Axially Chiral 2,2'-Bipyridine N,N'-Dioxides Bearing α-Amino Acid Residues and Their Applications in Enantioselective Allylation of Aromatic Aldehydes with Allyltrichlorosilane

A series of novel axially chiral 2,2′‐bipyridine N,N′‐dioxides bearing C₁ or C₂‐symmetry have been synthesized by the use of enantiopure α‐amino acids as chiral sources. The absolute stereochemistry of the axial chirality of these organocatalysts has been clearly assigned by means of CD measurements together with literature protocols. The reactivities and enantioselectivities of these organocatalysts have been examined in the reactions of aromatic aldehydes with allyltrichlorosilane, thus providing the desired products with moderate yields and enantioselectivies.     

Promotion effect of adsorbed water/OH on the catalytic performance of Ag/activated carbon catalysts for CO preferential oxidation in excess H2

Activated carbon (AC) supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation (PROX) in excess H₂ was evaluated. Ag/AC catalysts, after reduction in H₂ at low temperatures (≤200 °C) following heat treatment in He at 200 °C (He200H200), exhibited the best catalytic properties. Temperature-programmed desorption (TPD), X-ray diffraction (XRD) and temperature-programmed reduction (TPR) results indicated that silver oxides were produced during heat treatment in He at 200 °C which were reduced to metal silver nanoparticles in H₂ at low temperatures (≤200 °C), simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 °C. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H₂00 treatment displayed similar PROX of CO reaction properties to Ag/SiO₂. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.     

Morphology-controlled electrochemical sensing amaranth at nanomolar levels using alumina

Different-shaped aluminas were readily prepared via hydrothermal reaction. It was found that the morphology and the electrochemical sensing properties of alumina were heavily dependent on the reaction time. When extending the reaction time from 6 h to 24 h, the obtained alumina samples changed from amorphous bumps to regular microfibers in diameter of 200 nm, as confirmed by scanning electron microscopy. Transmission electron microscopy observation revealed that longer reaction time was beneficial for the formation of porous and uniform fiber-like structures. Electrochemical tests proved that alumina microfibers were more active for the oxidation of amaranth and exhibited much higher enhancement effect, compared with alumina bumps. On the surface of alumina microfibers, the oxidation peak currents of amaranth increased remarkably. The influences of pH value, amount of alumina microfibers, and accumulation time on the signal enhancement of amaranth were discussed. As a result, a novel electrochemical method was developed for the detection of amaranth. The linear range was from 1 to 150 nM, and the detection limit was 0.75 nM after 1-min accumulation. The analytical application in drink samples was investigated, and the results consisted with the values that obtained by high-performance liquid chromatography.     

Experimental Evidence for Ion Accumulation Time Affecting Qualitative and Quantitative Analysis of Ophiopogons in Ophiopogon Extract by Hybrid Ion Trap Time-of-Flight Mass Spectrometry

The qualitative and quantitative capability of the ion trap mass analyzer could be greatly affected by the accumulation time. However, the importance of the accumulation time has not so far been thoroughly explored. Here, the influence of ion accumulation time on qualitative and quantitative analysis of complicated components was systematically investigated based on the case study of 40 ophiopogonins in Ophiopogon extract by hybrid ion trap time-of-flight mass spectrometry (LCMS-IT-TOF). In this process, the accumulation time was set at 10, 25, 50, 100, and 200 ms, respectively. The effect of accumulation time on qualitative analysis of ophiopogonins was studied by comparing the total ion current (TIC) of MS¹, TIC of MS², and the number and signal of fragmental ions. The results demonstrated that the signal could be greatly influenced by varying the accumulation time. The number and signal of the fragmental ions were increased significantly with a longer accumulation time in the range of 10–100 ms. Also, the effect of accumulation time on quantitative analysis of ophiopogonins was investigated by comparing the linearity, accuracy, and precision measured on LCMS-IT-TOF. Importantly, quantitative parameters could all be significantly improved by choosing an appropriate accumulation time.

     

Responsive polymers for analytical applications: A review

Stimuli-responsive polymers are capable of translating changes in their local environment to changes in their chemical and/or physical properties. This ability allows stimuli-responsive polymers to be used for a wide range of applications. In this review, we highlight the analytical applications of stimuli-responsive polymers that have been published over the past few years with a focus on their applications in sensing/biosensing and separations. From this review, we hope to make clear that while the history of using stimuli-responsive polymers for analytical applications is rich, there are still a number of directions to explore and exciting advancements to be made in this flourishing field of research.     

Total Synthesis of α-Elvucitabine

Total synthesis of α-elvucitabine was achieved in 26% overall yield by a concise nine-step procedure starting from L-lyxose, with trimethylsilyl trifluoromethaneoulfonate (TMSOTf)–mediated stereocontrolled α-N-glycosidation and olefination through Barton–McCombie deoxygenation being the key steps, and the stereochemistry of the product was determined by nuclear Overhauser effect spectroscopy.