咪唑类离子液体结构与熔点的构效关系及其基本规律

熔点是界定、研究离子液体及其使用过程的一个重要参考指标,因此研究离子液体分子结构与熔点之间的构效关系及其基本规律有特别重要的意义。本文以从近两百遍文献及Beilstein Gmelin网络数据库中收集的约900种咪唑类离子液体中的384种咪唑类离子液体的熔点数据为依据,考察了离子液体分子结构与熔点之间的构效关系及其基本规律,这对离子液体的设计合成及应用有指导作用。     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光     

Preparation and photocatalytic degradability of TiO2/polyacrylamide composite

Based on the unique absorbent characters and three-dimensional network structure of polyacrylamide (PAM) superabsorbent polymer, a photocatalytic degradable TiO₂/PAM composite was synthesized by an aqueous solution polymerization method with N,N′-methylene bisacrylamide as crosslinker, potassium peroxydisulfate as initiator, acrylamide as monomer, and TiO₂ (P-25) as functional filler. The photocatalytic degradability of the composite was evaluated using methyl orange as photodegradation target, and the recovery and reproducibility of the composite was investigated. It was found that TiO₂/PAM composite had a good photocatalytic degradability, the composite also possessed a good reproducibility of photocatalytic degradability, which is possible to be used in practical process.     

长链脂肪酸LB膜的X射线衍射研究

利用Langmuir-Blodgett技术制备了硬脂酸、花生酸及其混合酸的多层LB膜。用低角X射线衍射研究了它们的周期结构,硬脂酸和花生酸的LB膜在2θ=0.8°～23°的范围内分别出现13个和12个布拉格衍射峰,由此计算了它们的等同周期。用模型计算了它们衍射峰的强度,得到了与实验一致的衍射强度奇偶起伏的结果。在混合酸的LB膜中,可以观察到等同周期随混合比变化的规律。     

高折光指数光学树脂的合成——相转移法合成不饱和硫醇酯单体的条件控制

采用正常的低温相转移催化（ＰＴＣ）和反滴碱溶液ＰＴＣ法分别合成了含硫双烯ＭＥＳＤＭＡ和单烯ＭＥＰＳＭＡ．１Ｈ ＮＭＲ分析证明ＭＥＳ中的杂质主要是由原料ＴＤＧ引入的．对含单个巯基的ＭＥＰＳ的正常ＰＴＣ酯化接枝双键，因存在巯基和不饱和双键的加成反应而导致失败．作者最终得到了折光指数在１６２５以上的ＭＥＳＤＭＡ／ＭＥＰＳＭＡ共聚物．     

液晶光定向层材料

本文综述了近10年来液晶显示用光定向层材料领域的研究现状和进展情况，主要概述了光降解型、光致异构型、光交联型以及自组装等材料，并对目前报道的液晶光定向机理进行了总结和归纳。     

Optimization of on-chip elongation for fabricating double-stranded DNA microarrays

The sequence-specific recognitions between DNA and proteins are playing important roles in many biological functions. The double-stranded DNA microarrays (dsDNA microarrays) can be used to study the sequence-specific recognitions between DNAs and proteins in highly parallel way. In this paper, two different elongation processes in forming dsDNA from the immobilized oligonucleotides have been compared in order to optimize the fabrication of dsDNA microarrays: (1) elongation from the hairpins formed by the self-hybridized oligonucleatides spotted on a glass; (2) elongation from the complementary primers hybridized on the spotted oligonucleatides. The results suggested that the dsDNA probes density produced by the hybridized-primer extension was about four times lower than those by the self-hybridized hairpins. Meanwhile, in order to reduce the cost of dsDNA microarrays, we have replaced the Klenow DNA polymerase with Taq DNA polymerase, and optimized the reaction conditions of on-chip elongation. Our experiements showed that the elongation temperature of 50 °C and the Mg²⁺ concentration of 2.5 mM are the optimized conditions in elongation with Taq DNA polymerase. A dsDNA microarray has been successfully constructed with the above method to detect NF-kB protein.     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

Sesquiterpenoids from the Rhizome of Ligularia virgaurea

Two novel sesquiterpene dimers, compounds 1 and 2 , were isolated from the rhizome of Ligularia virgaurea, together with the six known sesquiterpenoids 3 – 8 . Their structures were established by physico‐chemical and spectroscopic methods, especially by means of 1D‐ and 2D‐NMR as well as HR‐MS analyses. A mechanism based on a classical Diels–Alder cyclization is proposed for the formation of the dimer 1 from the precursors 8 and the quinone form of 6 (Scheme).     

玻璃载体表面脱氧核糖核酸的固定及其化学发光检测

用硅烷化偶联剂把ＤＮＡ直接共价固定在载玻片表面，将辣根过氧化物酶标记的探针与之进行核酸杂交，杂交后用增强的化学发光检测。方法的检出限为７５ｐｇ。研究了ＤＮＡ分子固定在玻璃载体表面的各种条件，并建立了在玻璃载体表面进行核酸杂交的体系，为研究光纤ＤＮＡ生物传感器打下了基础。