丙烯环氧化反应的高活性钼催化剂

在钼(Ⅵ),钒(Ⅴ)和钛(Ⅳ)等化合物存在下,丙烯与烷基过氧化氢的环氧化反应比传统的氯醇法有很多优点,其中以钼催化剂的性能最优,但目前报道的催化剂在反应过程中因易分解而降低了活性,并且丙烯与烷基过氧化氢的投料比过大(>3:1),丙烯循环次数过多。前文报道了钼烷基醇胺化合物对环已烯的环氧化反应,本文考察了钼烷基醇胺化合物对丙烯与叔丁基过氧化氢环氧化反应的催化性能。     

Selective Determination of Trace Mercury (II) after Preconcentration with 4-(2-Pyridylazo)-Resorcinol-Modified Nanometer-Sized SiO2 Particles from Sample Solutions

A rapid, selective method that utilize 4-(2-Pyridylazo)-resorcinol (PAR)-modified nanometer SiO₂ (nanometer SiO₂–PAR) as a new solid-phase extractant for preconcentration of trace mercury (II) has been developed. The adsorption property of nanometer SiO₂–PAR for metal ions was studied by selectively extracting different metal ions from aqueous solutions. The results revealed an excellent affinity of the nanometer SiO₂–PAR for mercury (II) in presence of interfering metal ions at pH 4. The main parameters of solid-phase extraction such as shaking time, elution and sample dilution effect were studied. The extractant shows rapid kinetic sorption, and the adsorption equilibrium of mercury (II) on nanometer SiO₂–PAR was achieved in less than 2 min. The adsorbed mercury (II) was easily eluted by 4 mL of 6 mol L⁻¹ HCl. The maximum preconcentration factor was 50. The maximum static adsorption capacity was 276 μmol g⁻¹ at pH 4. The detection limit (3σ) was 0.43 μg L⁻¹ for cold vapor atomic absorption spectrometry (CVAAS), and the relative standard deviation of the eight replicate determinations was 2.4% for the determination of 2.0 μg of Hg(II) in 100 mL water sample. The method was applied to the determination of trace mercury (II) in sample solutions with satisfactory results.     

Voltammetric studies of the effect of Cisplatin-liposome on Hela cells

In this paper, the voltammetric method was used for the first time to study the effect of Cisplatin-liposome on Hela cells. The results showed the voltammetric behavior of Hela cells was irreversible and the peak current had linear relationship with the cell number. With both Cisplatin-liposome concentration and treating time increasing, the peak current decreased. The peak current decreasing was in accordance with the nuclear damage and loss of mitochondrial membrane potential revealed by two-photon laser scanning microscopy and confocal laser scanning microscopy. This voltammetric method may provide a simple way to study the electron-transfer mechanism in drug-treating cells.     

Targeting apoptosis via chemical design: inhibition of bid-induced cell death by small organic molecules

Bid is a key member of the Bcl-2 family proteins involved in the control of the apoptotic cascade in cells, leading to cell death. Uncontrolled cell death is associated with several human pathologies, such as neurodegenerative diseases and ischemic injuries. Therefore, Bid represents a potential yet unexplored and challenging target for strategies aimed at the development of therapeutic agents. Here we show that a multidisciplinary NMR-based approach that we named SAR by ILOEs (structure activity relationships by interligand nuclear Overhauser effect) allowed us to rationally design a series of 4-phenylsulfanyl-phenylamine derivatives that are capable of occupying a deep hydrophobic crevice on the surface of Bid. These compounds represent the first antiapoptotic small molecules targeting a Bcl-2 protein as shown by their ability to inhibit tBid-induced SMAC release, caspase-3 activation, and cell death.     

Novel carboxylated oligothiophenes as sensitizers in photoelectric conversion systems

Novel carboxylated oligothiophenes with different thiophene units were designed and synthesized as photosensitizers in dye-sensitized solar cells (DSSCs) for efficient opto-electric materials. The introduction of -COOH into thiophene molecules can lead to a red shift of UV-visible absorption, increase light-harvesting efficiency, and enhance photoinduced charge transport by forming efficient covalent bonds to the substrate surface. A red shift of the absorption spectrum of oligothiophene is also achieved by the increase in the number of thiophene units. The DSSCs based on the oligomers have excellent photovoltaic performances. Under 100 mW cm(-2) irradiation a short-circuit current of 10.57 mA cm(-2) and an overall energy conversion efficiency of 3.36 % is achieved when pentathiophene dicarboxylated acid was used as a sensitizer. The incident photo-to-current conversion efficiency (IPCE) has a maximum as high as 80 %. In addition, photovoltage and photocurrent transients show that slow charge recombination in DSSCs is important for efficient charge separation and excellent photoelectric conversion properties of the oligomers. These initial and promising results suggest that carboxylated oligothiophenes are efficient photosensitizers.     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

粗糙化银电极上氰基钴胺素的电化学行为

比较研究氰基钴胺素在光滑和粗糙化银电极上的电化学行为，发现在光滑银电极上氰基钴胺素的还原为一个二电子过程，而在粗糙化银电极上则为两个一电子过程，其原因是由于粗糙化银电极对氰根的强吸附作用。     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

铝酸钠和含硅铝酸钠溶液结构和性质的研究

本文通过对铝酸钠和硅铝酸钠溶液的红外光谱、拉曼光谱、粘度、表面张力、丁达尔现象和聚沉等光谱和物理化学性质的研究测定,分析了硅在铝酸钠溶液中的行为.认为硅主要是取代Al-O-Al结构中的Al,形成Al-O-Si结构和Al-O-Si-O-Al-O结构等多种形式硅氧铝键以及由氢键相连的大分子结构.这种结构直接影响其物理化学性质,表现为随硅含量增加表面张力增加,粘度上升,具有丁达尔现象等.说明含硅铝酸钠溶液中存在大分子的胶性基团,属于无机高分子溶液,这种网络状"大分子"结构是硅铝酸钠溶液稳定的原因.