TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.     

担载液相催化剂的研究——Ⅳ.催化剂的原位红外光谱表征

本文利用原位红外光谱方法对铑基担载液相催化剂(SLPC)在接近于实际反应条件下进行了表征。结果表明,新鲜催化剂上,铑膦络合物主要以二聚物的形式存在,如Rh_2(CO)_2(PPh_3)_4而在合成气或反应气氛中,催化剂铑膦络合物以单核络合物HRh(CO)_2(PPh_3)_2的形式存在。文中还对SLPC在CO,H_2,C_2-H_4,空气和HCl中处理时铑络合物种的变化进行了原位观察。实验结果表明,SLPC上活性铑络合物与对应的均相过程完全一致,进一步证实了SLPC催化在微观上就是一个均相催化过程。     

Stereospecific rearrangements during the synthesis of pyrrolidines and related heterocycles from cyclizations of amino alcohols with vinyl Sulfones

Conjugate additions of amino alcohols derived from alpha-amino acids to vinyl sulfones, followed by N-benzylation, chlorination, and intramolecular alkylation, provide a convenient route to substituted pyrrolidines. The process is accompanied by the stereospecific rearrangement of substituents from the alpha-position of the amine to the beta-position of the product and takes place via the corresponding aziridinium ion intermediates. Another type of rearrangement was observed during the reaction of (2-piperidine)methanol or 2-(2-piperidine)ethanol with phenyl trans-1-propenyl sulfone, in which the methyl group appears to migrate from the beta- to the alpha-position of the sulfone moiety. This process involves the isomerization of phenyl trans-1-propenyl sulfone to phenyl 2-propenyl sulfone by the addition-elimination of catalytic benzenesulfinate anion to the former vinyl sulfone, followed by conjugate addition of the amino group to the latter sulfone. Chlorination and intramolecular alkylation then afford the corresponding rearranged indolizidine and quinolizidine derivatives, respectively.     

羰基过渡金属异核原子簇(PPh3)2CuFe2Co(CO)8(μ3-S)和(PPh3)3AuFe2Co(CO)7(μ3-S)的合成与表征

本文利用高压法制备HFe₂Co(CO)₉(μ₃-S),作为原料,经脱质子化作用,再分别与(PPh₃)₂Cu(NO₃)和PPh₃AuCl反应,将Ph₃Cu-或Ph₃Au-联接到原始簇合物的中心骨架上,使簇核扩大,得到了组成为(PPh₃)₂CuFe₂Co(CO)₈(μ₃-S)和(PPh₃)₃AuFe₂Co(CO)₇(μ₃-S)的化合物.文中对此两个新化合物进行了IR,UV,¹H和³¹P NMR.元素分析、熔点测定等性质表征,并对(PPh₃)₂CuFe₂Co(CO)₇(μ₃-S)进行了单晶X-射线衍射分析.两个化合物具有类似的中心骨架,在Fe₂和Co原子三角形的上面和下面分别键联着Cu和S,或Au和S原子,构成了三角双锥结构.其中一个簇合物由二个三苯基膦和八个羰基配位,另一个则由三个三苯基膦和七个羰基配位.     

钴膦簇合物的催化环丙烷化反应

本文首次利用碳基钴簇合物ＰｈＰＣｏ_３（ＣＯ）_９催化剂，在常压和－２０℃－０℃，用苯乙烯和重氮乙酸乙酯进行环丙烷化反应，合成了菊酸酯，重氮乙酸乙酯可全部转化，酯的选择性可达８５％。产物经减压分馏后，由ＩＲ和￣１ＨＮＭＲ分析，确证了产物为菊酸酯，表明了羰基钴簇合物对苯乙烯的环丙烷化反应有良好的催化性能，为四面体异核簇合物用于不对称催化反应打下了基础。     

硅胶担载四核羰基钴催化剂的EXAFS和IR研究

本文以透射法EXAFS和IR等手段研究了四核羰基钴金属簇Co_4(CO)_(10)(PPh)_2担载在SiO_2上以后及用于烯烃醛化反应前后的变化,确定了相应的结构参数并探讨了催化活性与结构的关系。     

膦取代的羰基铂簇的合成,结构和性质

Pt(PPh_3)_2Cl_2在碱性介质中,与一氧化碳直接进行还原及羰基化反应,得到五种膦取代的羰基铂配合物:Pt_5(μ_2-CO)_5(CO)(PPh_3)_4 1,Pt_3(μ_2-CO)_3(PPh_3)_3 2,Pt_3(μ_2-CO)_3(PPh_3)_4 3,Pt_4(μ_2-CO)_5(PPh_3)_4 4,以及Pt(Cl)(PPh_3)_2(COOCH_3) 5。经X-射线单晶衍射分析,确定了新的三核铂羰基簇2以及配合物5的分子结构。还讨论了1和5的生成机理。     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

SXI route to mesostructured materials from Fau and Beta zeolite precursors: A comparative study of their assembly behaviors in extremely acidic media

Mesoporous molecular sieves were synthesized from Beta and Fau zeolite precursors through S⁺X⁻I⁺ route under extremely acidic conditions in parallel (designated as M_Beta and M_Fau, respectively). The textural properties of M_Fau were different from its M_Beta counterpart but resembled normal MCM-41 silica from TEOS. Al content in M_Beta was almost equivalent to that in the initial Beta zeolite precursors, whereas only trace Al species was present in M_Fau from elemental analysis results. The hydrothermal stability of M_Beta after post-synthesis ammonia treatment was considerably improved compared with normal MCM-41 aluminosilicates, whereas the M_Fau after the same procedure was as unstable as normal MCM-41 silica. Thus, the assembly behaviors of Beta and Fau zeolite precursors were comparatively studied based on these results. The microstructure of Fau zeolite precursors were degraded by the extremely acidic condition, and Al species was dissolved into the synthesis mixture. However, Beta zeolite precursors survived the chemical attack of extremely acidic media and were incorporated into mesostructured framework as primary building units.