A novel dimeric procyanidin glucoside from Polygonum aviculare

A novel dimeric procyanidin glucoside,catechin 3-O-acetate-(4 α→8)-catechin 3-O-acetate-3’-O- β-D-glucopyranoside(1), along with five flavonoids and one lignan were isolated from the aerial parts of Polygonum aviculare.Their structures were elucidated by spectroscopic analyses including 1D,2D NMR,MS and CD methods.     

Crystallization Elution Fractionation and Thermal Gradient Interaction Chromatography. Techniques Comparison

Summary: The chemical composition distribution has been shown to be the most critical and discriminating parameter in understanding the performance of industrial polyolefins with non homogeneous comonomer incorporation. The chemical composition distribution is being analyzed by well known techniques such as temperature rising elution fractionation, TREF, crystallization analysis fractionation, CRYSTAF and crystallization elution fractionation, CEF. These techniques separate according to crystallizability and provide a powerful and predictable separation of components based on the presence of branches, irregularities or tacticity differences, independently of the molar mass. TREF, CRYSTAF and CEF can not be used, however, for the separation of more amorphous resins, and may not always provide the best solution for complex multi-component resins due to the existence of some co-crystallization. The application of high temperature interactive HPLC to polyolefins opened a new route to characterize these types of polymers. The use of solvent gradient HPLC for separation of polyethylene and polypropylene and the developments in HPLC on carbon based columns extended further the application of high temperature HPLC in polyolefins. A new approach has been developed recently using the carbon based column but replacing solvent gradient by a thermal gradient which facilitates the analysis of polyethylene copolymers and provides a powerful tool for the analysis of elastomers. Thermal gradient interaction chromatography (TGIC) is being compared with TREF and CEF with the analysis of model samples. The advantages/disadvantages of each technique are being investigated and discussed. The combination of TGIC and TREF/CEF provides an extended range of separation of polyolefins.     

Simultaneous analysis and retention behavior of major isoflavonoids in Radix Puerariae lobatae and Radix Puerariae thomsonii by high performance liquid chromatography with cyclodextrins as a mobile phase modifier

In order to differentiate two species of Radix Puerariae (Radix Puerariae lobatae and Radix Puerariae thomsonii) and to determine major isoflavonoids (puerarin, daidzin, daidzein and genistein) in the samples, a simple high performance liquid chromatography (HPLC) method with isocratic elution employing cyclodextrins (CDs) as mobile phase additives was developed. Various factors affecting the retention of isoflavonoids in the C₁₈ reversed-phase column, such as the nature of CDs, the concentration of hydroxypropyl-β-cyclodextrin (HP-β-CD) and the methanol percentage in the mobile phase, were studied. Experimental results confirmed that HP-β-CD, as a very effective mobile phase additive, could markedly reduce the retention of isoflavonoids, especially daidzein and genistein. The elution of four isoflavonoids could be achieved on a Kromasil^® C₁₈ column within 56 min by using the methanol–water contained 5 mM HP-β-CD (25/75, v/v) mixture as the mobile phase. The formation of the inclusion complexes between isoflavonoids and HP-β-CD explained the modification of the retention of analytes. The apparent formation constants determined by HPLC confirmed that the stoichiometry of HP-β-CD-isoflavonoid complexes was 1:1, and the stability of the complexes depended on the size and property of isoflavonoids. The optimized method was successfully applied for the simultaneous determination of major isoflavonoids in P. lobatae and P. thomsonii samples. This work provides a useful method for the analysis of traditional Chinese herbs.     

Efficient Non-sterilized Fermentation of Biomass-Derived Xylose to Lactic Acid by a Thermotolerant Bacillus coagulans NL01

Xylose is the major pentose and the second most abundant sugar in lignocellulosic feedstock. Its efficient utilization is regarded as a technical barrier to the commercial production of bulk chemicals from lignocellulosic biomass. This work aimed at evaluating the lactic acid production from the biomass-derived xylose using non-sterilized fermentation by Bacillus coagulans NL01. A maximum lactic acid concentration of about 75 g/L was achieved from xylose of 100 g/L after 72 h batch fermentation. Acetic acid and levulinic acid were identified as important inhibitors in xylose fermentation, which markedly reduced lactic acid productivity at 15 and 1.0 g/L, respectively. But low concentrations of formic acid (<2 g/L) exerted a stimulating effect on the lactic acid production. When prehydrolysate containing total 25.45 g/L monosaccharide was fermented with B. coagulans NL01, the same preference for glucose, xylose, and arabinose was observed and18.2 g/L lactic acid was obtained after 48 h fermentation. These results proved that B. coagulans NL01 was potentially well-suited for producing lactic acid from underutilized xylose-rich prehydrolysates.     

Controlling the properties of poly(amino ester urethane)–poly(ethylene glycol)–poly(amino ester urethane) triblock copolymer pH/temperature-sensitive hydrogel

A series of triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(β-amino ester urethane) (PAEU) was synthesized and characterized. Its aqueous solution can be used as a non-cytotoxic, biodegradable, and pH/temperature-sensitive hydrogel system. The copolymer solutions exhibited sol-to-gel and gel-to-sol transitions with increasing pH and temperature, respectively. The properties of this hydrogel system, such as its sol–gel transition diagram, mechanical properties, and degradation rate, can be controlled by modulating the PEG molecular weight, PAEU block length, copolymer concentration, or structure of the monomers. The presence of urethane groups and ionized tertiary amine groups in the copolymer solution at lightly acidic pH may lead to a strong interaction of the copolymer with formulated bioactive therapeutic agents, while the existence of the gel state under physiological conditions (37 °C, pH 7.4) may enable this copolymer hydrogel to be applicable as a drug/protein carrier.     

Synthesis,Structure, Photoluminescence and Thermal Properties of Sodium Ethene‐Bis‐Nitrobenzenesulfonate

Abstract. Sodium ethene‐bis‐nitrobenzenesulfonate, [Na₂(ENS) · 6H₂O]_n( 1 ) was synthesized through coupling reaction of o‐nitrotoluenesulfonic acid in NaOH solution and characterized by single crystal X‐ray diffraction, elemental analysis, IR and ¹H NMR spectroscopy, XRPD, DSC and TGA (where ENS^2– = ethene‐bis‐nitrobenzenesulfonate). The asymmetrical unit of ( 1 ) consists of two octahedral Na^I ions, and the neighboring metal centers are bridged by μ₂ water molecules resulting in the formation of an inorganic tetranuclear unit. The tetranuclear units were connected through the ENS^2– ligands into a 2D topology net. The weak π–π stacking and H‐bonding interactions further stabilized the structure. The crystals of (C₇H₆NO₅S)^– · (H₅O₂)⁺ ( 2 ) were obtained by post‐processing the unreacted raw material to recycle. Furthermore, the rigidity and the conjugation effect of the aromatic system in compound 1 were increased through the coordination interactions of metal atoms to ligands, resulting in the emission coming from ligand enhanced with red‐shifting about 9 nm of the maximal wavelength. The conjugation effects and the steric arrangement of the substituent groups play the main role to the luminescence intensity and red‐shift effect.     

Synthesis of benzoxazine and 1,3-oxazine derivatives via ligand-free copper(I)-catalyzed one-pot cascade addition/cyclization reaction

A novel and efficient synthesis of benzoxazine and 1,3-oxazine derivatives via ligand-free copper(I)-catalyzed one-pot cascade addition/cyclization reaction has been developed. A variety of carbodiimides coupled with o-halophenylmethanols and/or substituted (Z)-3-iodoprop-2-en-1-ols to give the corresponding products in moderate to excellent yields under the mild condition.     

Correlation of Oscillation Cycles and Crystallization in HDPE Blends with Small Amounts of HMWPE Prepared by Dynamic-Packing Injection Molding

The effect of oscillation cycles on crystal morphology was investigated for high-density polyethylene (HDPE) in blends with 4 wt% high molecular weight polyethylene (HMWPE) (labeled B4) in samples prepared through dynamic-packing injection molding (DPIM). With the aid of differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), a weblike shish-kebab morphology that markedly increased stiffness and toughness was found at a specific oscillation cycle. The DSC and SEM results showed that crystal morphology was altered with changes in the oscillation cycle. The SEM and TEM results showed that a much better weblike shish-kebab structure, in which most of the lamellae connect different columns compared with conventional shish-kebabs, was formed in the B4 samples when the oscillation cycle was 10s. These results show that a proper oscillation cycle favors the improvement of crystal structures in HDPE blends induced by a small amount of HMWPE.     

Influence of Carbon Nanotubes on the Crystallization and Directional Tensile Behavior of High-Density Polyethylene Prepared by Dynamic-Packing Injection Molding

The influence of multi-walled carbon nanotubes (MWCNTs) on the crystallization and directional tensile properties of high-density polyethylene (HDPE) was studied for samples prepared by dynamic-packing injection molding (DPIM). Oscillatory shear was imposed on the gradually cooled melt during the packing solidification stage of DPIM. For the oriented composites containing 1.8 wt% MWCNTs, the tensile fracture behavior showed typical brittle features along the flow direction (FD) and perpendicular direction (PD), which were almost the same as those that occurred in oriented pure HDPE. The elongation at break along both directions decreased due to the incorporation of MWNCTs in the oriented composites compared with the oriented pure HDPE. However, the tensile strength of the oriented HDPE/MWCNT composites was greatly improved along the FD due to the presence of carbon nanotubes; meanwhile, it was not weakened along the PD. In scanning electron microscopy observations, it was found that there were some oriented hybrid shish-kebab structures in a nanometre scale in the oriented HDPE/MWCNT composites, but not in its isotropic composites. This suggests that MWCNTs were involved in the shear-induced crystallization of HDPE. Differential scanning calorimetry measurements confirmed that the crystallinity of oriented HDPE composites with 1.8 wt% MWCNTs was higher than those of isotropic HDPE and isotropic composites, but was not obviously higher than that of oriented pure HDPE. These findings demonstrate that MWCNTs indeed affected the formation of crystalline structures, but did not greatly influence the crystallinity of HDPE under shear flow. The transition of crystalline morphology might be the reason for change in tensile behavior for the oriented HDPE/MWCNT composites compared with the oriented pure HDPE.     

Advantages of Surface‐Initiated ATRP (SI‐ATRP) for the Functionalization of Electrospun Materials

Surface‐initiated atom transfer radical polymerization (SI‐ATRP) is successfully applied to electrospun constructs of poly(L ‐lactide). ATRP macroinitiators are adsorbed through polyelectrolyte complexation following the introduction of negative charges on the polyester surface through its blending with a six‐armed carboxy‐terminated oligolactide. SI‐ATRP of glycerol monomethacrylate (GMMA) or 2‐(N,N‐diethylamino)ethyl methacrylate (DEAEMA) allows then to grow surface films with controllable thickness, and in this way also to control the wetting and interactions of the construct.