Preparation of 9,13-dicis double bonds locked retinoids

Synthesis of two retionids in which the 9, 13-dicis double bonds were locked in cycloalkene or thiophene was described. The key steps were the Wittig olefination of phosphonium salt 3 and 23 with aldehyde 14, followed by carbonylation of vinyl bromide 17 and 24 with carbon monoxide in the presence ofPd(PPh3)4.     

共价有机骨架功能材料及其在糖肽选择性富集中的应用

蛋白质糖基化是生物体中最重要的翻译后修饰手段之一,糖蛋白/糖肽的有效分离和富集成为目前糖蛋白组学研究的首要问题.对于复杂的生物样本,糖蛋白的数量较少,酶解后大量高丰度非糖基化修饰肽的存在,使得低丰度糖肽的检测更加困难.因此,需要一些手段来有效地富集糖肽以提高其检测丰度,发展高选择性的糖肽富集材料及方法就成为在分子水平上...     

改性硅藻土负载亚铁氰化铜复合物的制备及其对Cs+的吸附性能

采用水热法、以氯化铝为铝源对硅藻土(De)进行改性,通过浸渍法将亚铁氰化铜(KCu HCF)纳米颗粒负载于改性De表面,制备出γ-Al OOH/De-KCu HCF和γ-Al₂O₃/De-KCu HCF两种复合吸附剂,对所制备的吸附剂进行了表征,并研究了其对Cs⁺的吸附性能。结果表明,所制备吸附剂具有优异的Cs⁺吸附性能,γ-Al OOH/De-KCu HCF和γ-Al₂O₃/De-KCu HCF最高吸附容量分别可达75.44、84.02 mg·g^-1,γ-Al₂O₃/De-KCu HCF对模拟卤水中Cs⁺的吸附率高达97.55%;以3 mol·L^-1NH₄NO₃为脱附剂,经3级连续脱附后,γ-Al₂O₃/De-KCu HCF的Cs⁺脱附率...     

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

Aseries of Ni catalysts supported on alumina with different Ce contents(1.0%-6.0%, mass fraction) was prepared by the impregnation method and used for dry reforming of methane(DRM) at a relatively low temperature of 650 ^oC. The promotion effect of Ce with different loading amounts on the physicochemical properties of the catalysts was systematically characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD), N₂ adsorption-desorption, thermo elemental IRIS Intrepid inductively coupled plasma atomic emission spectrometer (ICP-AES), UV-visible diffuse reflectance spectroscopy(UV-Vis DRS), Fourier transformation infrared(FTIR) spectra, H₂-temperature programmed reduction(H₂-TPR) analysis, H₂-temperature programmed desorption(H₂-TPD), and the X-ray photoelectron spectroscopy(XPS) techniques. The results indicate that all the catalysts mainly exist in the NiAl₂O₄ phase after being calcined at 750 ^oC with small Ni particle sizes due to the strong metal-support interaction derived from the reduction of the NiAl₂O₄ phase. The Ce-promoted catalysts show better catalytic performance as well as the resistance against sintering of Ni particles and deposition of carbon compared to the Ni/Al₂O₃ catalyst. The Ni-6Ce/Al₂O₃ exhibits the best catalytic stability and coke resistance among the four catalysts studied, which is due to its small Ni nanoparticles sizes, excellent reducibility as well as high amount of active oxygen species. In a 400 h stability test for DRM reaction at 650 ^oC, Ni-6Ce/Al₂O₃ exhibits less coke deposition and small growth of Ni nanoparticles. This work provides a simple way to preparing the Ni-Ce/Al₂O₃ catalyst with enhanced catalytic performance in DRM. The Ni-6Ce/Al₂O₃ catalyst has great potential for industrial application due to its anti-sintering ability and resistance to carbon deposition.     

采用配备GPC纯化装置的GC/MS进行农产品中农药残留的快速分析

本文采用GPC-GC／MS在线连接系统和固相萃取的方法快速测定农产品中的农药残留。该方法首先用液-液分配法从均化的食物样品中提取农药,然后用PSA结合相进行固相萃取,最后进行GPC-GC／MS分析。GPC-GC／MS系统包括一套GPC净化装置,可以简化样品前处理步骤。把浓度为0．1 μg／g的97种农药添加到马铃薯、甘蓝和胡萝卜中,得到了比较好的回收率。整个分析过程大约需要50 min。     

Synthesis of 5,7-Dimethyl-2-(5-Substituted-1,3,4-Oxadiazole-2-yl)- Methylenethio-1,2,4-Triazolo[1,5-a]Pyrimidines as Potential Fungicides

New challenging problems in plant protection technology have promoted research to discover more efficient pesticides. In recent years, many chemists have paid much attention to compounds bearing 1,2,4-triazolo [1,5-a] pyrimidine rings due to their broad spectrum of biological activities such as herbicidal and fungicidal effects1-7. Up to now, a great variety of these kinds of compounds have been synthesized, among which some commercially herbicides have been developed including metosulam, f…     

炭化过程对铁基费托合成催化剂强度和结构的影响

以模型费托合成Fe基催化剂为研究对象,在纯CO气氛中对催化剂进行不同时间的预处理,采用多种手段对预处理后催化剂的物理化学性质和抗磨损能力进行了表征。结果表明,在预处理初期,随着预处理时间的延长,催化剂的炭化程度显著提高,伴随着催化剂比表面积的降低和颗粒粒径的减小,而催化剂的抗磨损能力逐渐提高。当预处理时间超过72 h后,继续延长预处理时间,催化剂的炭化程度不再增加,而积炭程度逐渐增加,伴随着催化剂比表面积和颗粒粒径的增加,催化剂的质量也同时增加,并导致催化剂的抗磨损能力逐渐降低。     

基于挥发性组分的气相色谱指纹图谱评价沉香化气片质量

建立了沉香化气片的气相色谱指纹图谱,并结合化学模式识别评价20批沉香化气片的质量。乙醇超声提取20批沉香化气片的挥发性成分,以正十八烷为内标,分析了3个主要组分的含量,且以内标计算其他各组分的相对峰面积,建立了沉香化气片的气相色谱指纹图谱,确定了11个共有峰,得到了各批次样品的相似度,并通过气相色谱-质谱法和对照品比对对10个共有峰进行了指认。将获得的峰面积指纹图谱采用系统聚类分析和主成分分析进行化学模式识别研究,实现了不同批次沉香化气片的区分,发现了造成不同批次样品差异的主要标记物。该方法有效且综合性强,为科学评价与有效控制沉香化气片的质量提供了可靠的参考。     

A UNIFIED ISOSTATIC DATUM AND ITS APPLICATION IN SEA LEVEL CHANGE RESEARCH

The necessity of establishing a Unified Isostatic Datum (UID) for studying the sea levelchanges along the coast of China is discussed in this paper. A so-called Coastal Land Ver-tical Movement Isostatic Datum (CLVMID) is established based on precise releveling dataperformed from the 1950s to 1980s and some coniunction releveling data with tide stations.All the data consists of about 250,000 km releveling lines and covers the whole mainland ofChina. As examples, datum corrections for sea level changes derived from two tide stationsand recent crustal vertical movement in the Yangtse Delta area relative to the datum aregiven to explain the significance of the isostatic datum in the research of the sea levelchange trend.     

PAR螯合树脂相光度法测定钯

树脂相光度法是一种灵敏、快速、简单的分离富集与测定同时进行的新型方法[1 ,2 ] 。该方法以离子交换树脂作载体 ,直接对显色树脂进行光度测定 ,避免了洗脱、分离等复杂过程 ,使灵敏度得到了很大提高 ,迄今为众多研究者关注[3] 。铂族金属钯的光度分析法报道较多[4] ,但迄今少见用树脂相光度法测定钯的报道。星野仁等[5 ,6] 指出在ＥＤＴＡ ＮａＯＨ 硼砂介质中 ,ＰＡＲ Ｐｄ(Ⅱ )配合物与十四烷基二甲基苄基氯化铵形成离子缔合物 ,该缔合物能被ＣＨＣｌ3定量萃取 ,其摩尔吸光系数为 3.2 9× 1 0 4 ,方国桢等[7] 确定了在ＥＤ ＴＡ ＮａＯ…