The potential energy surface of singlet cyclobutadiene and substituted analogs: a coupled-cluster study

Coupled-cluster investigations (CCSD/cc-pVDZ and CCSD/cc-pVQZ//CCSD/cc-pVDZ) of singlet cyclobutadiene and fifteen-substituted analogs were conducted. A local minimum with a square frame does not exist on their potential surfaces. The well-known rectangular D_2h minimum, the square D_4h transition state, and two additional stationary points were found on cyclobutadiene’s potential surface. This included a transition state with a rhombic carbon ring and C_2h symmetry, separating two equivalent puckered C_2v local minima. The predicted barriers were 19.7 and 19.8 kcal/mol at the CCSD/cc-pVDZ and CCSD/cc-pVQZ//CCSD/cc-pVDZ levels, respectively. The relative strain energies of rectangular D_2h cyclobutadiene and all fifteen-substituted analogs were obtained from isodesmic reactions. Progressive substitution with methyl or BH₂ groups continuously lowers ring strain while increasing substitution with fluorines or trifluoromethyl groups steadily increases ring strain. C₄(BH₂)₄ is 16.6 and 13.3 kcal/mol less strained than cyclobutadiene while C₄F₄ is 17.7 and 21.5 kcal/mol more strained at the levels above. Cyclobutadiene is more strained than both cyclopropene and cyclobutene by 12.2 and 37.0 kcal/mol, respectively. Electron density contours indicate that fluorine substitution raised the electron density especially in the short C=C ring bonds above/below the ring plane (π-electrons) but not in the ring plane (σ-electrons). BH₂-substitutions lower the ring π-electron density with little effect in the ring plane. Methyl substituents have little effect on electron densities. All rings retain a strong bond alternation tendency (rectangular) whether substituted with electron-donating or -attracting groups. One-bond coupling constants and the percent p-character in ring C-to-C and C-to-substituent bonds are described.     

Development and Investigation of a Mesh-Electrode Linear Ion Trap (ME-LIT) Mass Analyzer

A mesh-electrode linear ion trap (ME-LIT) mass analyzer was developed and its performance was primarily characterized. In conventional linear ion trap mass analyzers, the trapped ions are mass-selected and then ejected in a radial direction by a slot on a trap electrode. The presence of slots can strongly affect the electric field distribution in the ion trapping region and distort the mass analysis performance. To compensate for detrimental electric field effects, the slot is usually designed and fabricated to be as small as possible, and also has very high mechanical accuracy and symmetry. A ME-LIT with several mesh electrodes was built to compensate for the effects caused by slots. Each mesh electrode was fabricated from a plate electrode with a relatively large slot and the slot was covered with a conductive mesh. Our preliminary experimental results show that the ME-LIT could considerably diminish the detrimental electric field effects caused by slots, and increase the mass resolving power and ion detection efficiency. Even with 4-mm-wide slots, a mass resolution in excess of 600 was obtained using the ME-LIT. Mass resolution could be remarkably improved using mesh electrodes in ion traps with asymmetric electrodes. The stability diagram of the ME-LIT was mapped, and highly efficient tandem mass spectrometry was demonstrated. The ME-LIT was qualified as a LIT mass analyzer. The ME-LIT can improve the mass resolution and decrease the requirements of mechanical accuracy and symmetry of slots, so it shows potential for a wide range of practical uses.

Differentiation and Distributions of DNA/Cisplatin Crosslinks by Liquid Chromatography-Electrospray Ionization-Infrared Multiphoton Dissociation Mass Spectrometry

Liquid chromatography-electrospray ionization-infrared multiphoton dissociation (IRMPD) mass spectrometry was developed to investigate the distributions of intrastrand crosslinks formed between cisplatin and two oligodeoxynucleotides (ODNs), d(A₁T₂G₃G₄G₅T₆A₇C₈C₉C₁₀A₁₁T₁₂) (G3-D) and its analog d(A₁T₂G₃G₄G₅T₆T₇C₈C₉C₁₀A₁₁T₁₂) (G3-H), which have been reported to adopt different secondary structures in solution. Based on the formation of site-specific fragment ions upon IRMPD, two isobaric crosslink products were differentiated for each ODN. The preferential formation of G₃G₄ and G₄G₅ crosslinks was determined as a function of reaction conditions, including incubation temperature and presence of metal ions. G3-D consistently exhibited a greater preference for formation of the G₄G₅ crosslink compared with the G3-H ODN. The ratio of G₃G₄:G₄G₅ crosslinks increased for both G3-D and G3-H at higher incubation temperatures or when metal salts were added. Comparison of the IRMPD fragmentation patterns of the unmodified ODNs and the intramolecular platinated crosslinks indicated that backbone cleavage was significantly suppressed near the crosslink.

Phase‐controlled crystallization of amorphous calcium carbonate in ethanol‐water binary solvents

The evolution of amorphous calcium carbonate (ACC) into crystals in ethanol/water binary solvents under ambient temperature was investigated, and it was found to depend on the volume ratio of ethanol to water (R). Calcite remained dominant when the amount of water was high (R = 1/3). A slight change in the amount of ethanol (R = 3/1) could lead to a dramatic change in the polymorph from calcite to aragonite. However, when poly (allylamine hydrochloride) (PAH) was added at R = 3/1, almost pure vaterite could be obtained, which has a specific morphological variation (from hollow microspheres to cloud‐like). This study provides an alternative polymorphic route for the CaCO₃ mineral by using the evolution of ACC in different solvent environments, which provides some useful clues for understanding the importance of kinetic control of the morphologies and polymorphs of a wide range of inorganic materials. In addition, this simple mild phase‐controlled synthetic method could be scaled up as a green chemistry route for the industrial production of different polymorphs of CaCO₃.     

Using cone calorimeter to study thermal degradation of flexible PVC filled with zinc ferrite and Mg(OH)2

Flame-retarded poly(vinyl chloride) (PVC) materials have been prepared by using zinc ferrite (ZnFe₂O₄ (ZFO)) combined with magnesium hydroxide (Mg(OH)₂ (MH)). The effects of these additives on the combustion and thermal degradation of PVC samples were studied using the limiting oxygen index test, the smoke density rating test, thermogravimetric–differential thermogravimetry, and the cone calorimeter test. The results showed that ZFO and MH were good synergists for improving the flame retardancy and smoke-suppressing of PVC/MH/ZFO blends. ZFO can significantly improve the maximum mass loss velocity in the first stage, and reduce the initial decomposition temperature and the decomposition range in the PVC/MH/ZFO blends. The char yield at 700 °C of flame-retarded PVC clearly decreased below theoretical values due to the cationic cracking reactions in the presence of ZFO. Furthermore, the PVC/10MH/10ZFO showed strong flame-retarding synergism since the decreased average heat release rate value. And the PVC/19MH/1ZFO presented a significant smoke-suppressing effect by the least average specific extinction area, peak smoke production rate, and total smoke produce. Moreover, the CO and CO₂ production was increased because of a large amount of fragment of char residue in contact air in the presence of ZFO.     

Microcalorimetric investigation on antibacterial activity of the peptide from Plutella xylostella

The antibacterial activities of a kind of novel peptide from Plutella xylostella (pxCECA1) on methicillin-resistant staphylococcus aureus (MRSA) and Escherichia coli (E. coli) growth were investigated by microcalorimetry. The heat flow power–time curves of MRSA and E. coli growth in the presence of pxCECA1 were recorded using the 3114/3115 Thermal Activity Monitor Air Isothermal Calorimeter based on ampoule mode at 37 °C. Some parameters including growth rate constant k, maximum power output P _max, total heat output Q_t, generation time t _g, growth inhibitory ratio I, and half-inhibitory concentration of the drugs IC₅₀ were obtained to elucidate the antibacterial activity of pxCECA1. The results showed that k, P _max, and Q _t decreased, but I and t _g increased or delayed with the increase in pxCECA1 concentration. The IC₅₀ of pxCECA1 on E. coli was 6.122 μg mL^?1 and MRSA was 7.809 μg mL^?1. It could be concluded that pxCECA1 had stronger inhibitory effect on E. coli than MRSA. In vivo test was simultaneously performed using an E. coli and MRSA infection model to validate the antibacterial activity of pxCECA1. The results revealed that pxCECA1 with broad spectrum antimicrobial activities hopefully represented a class of promising substitute of antimicrobial agents.     

Preparation and thermal properties of poly[acrylonitrile-co-(β-methylhydrogen itaconate)] used as carbon fiber precursor

In order to replace terpolymer with bipolymer, a bifunctional comonomer β-methylhydrogen itaconate (MHI) containing carboxyl group and ester group was synthesized to prepare poly[acrylonitrile-co-(β-methylhydrogen itaconate)] [P(AN-co-MHI)] bipolymers used as carbon fiber precursor for improving the stabilization and spinnability at the same time. The P(AN-co-MHI) bipolymers with different monomer feed ratios were characterized by elemental analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The results show that both the polymerization conversion and molecular mass of P(AN-co-MHI) reduce with the increasing MHI amounts in the feed due to the larger molecular volume of MHI than acrylonitrile (AN). The monomer reactivity ratios were calculated by Fineman–Ross and Kelen–Tüdõs methods, the results show good agreement and MHI possesses higher reactivity than AN. Two parameters $ E_{\text{s}} = A_{{1,629\,{\text{cm}}^{ - 1} }} /A_{{2,244\,{\text{cm}}^{ - 1} }} $ and $ SI = (I_{0} - I_{\text{S}} )/I_{0} $ were defined to evaluate the extent of stabilization, and the activation energy (E _a) of the cyclization was calculated by Kissinger method and Ozawa method. The FTIR, XRD, and DSC results show that P(AN-co-MHI) bipolymers exhibit significantly improved stabilization characteristics than PAN homopolymer, such as larger extent of stabilization, lower initiation temperature, and smaller E _a of cyclization, which is attributed to the ionic initiation by MHI comonomer and it is beneficial to preparing high-performance carbon fiber.     

Pyrolysis and combustion model of oil sands from non-isothermal thermogravimetric analysis data

Thermogravimetric (TG) data of oil sand obtained at Engineering Research Center of Oil Shale Comprehensive Utilization were studied to evaluate the kinetic parameters for Indonesian oil sand samples. Experiments were carried out at heating rates of 5, 15, and 25 °C min^?1 in nitrogen, 10, 20, and 50 °C min^?1 in oxygen atmosphere, respectively. The extent of char combustion was found out by relating TG data for pyrolysis and combustion with the ultimate analysis. Due to distinct behavior of oil shale during pyrolysis, TG curves were divided into three separate events: moisture release, devolatilization, and evolution of fixed carbon/char, where for each event, kinetic parameters, based on Arrhenius theory, were calculated. Coats–Redfern method, Flynn–Wall–Ozawa method, and distributed activation energy model method have been used to determine the activation energies of degradation. The methods are compared with regard to their characteristics and the ease of interpretation of the thermal kinetics. Activation energies of the samples were determined by three different methods and the results are discussed.     

Electrospinning synthesis and photocatalytic property of CaFe2O4/MgFe2O4 heterostructure for degradation of tetracycline

CaFe₂O₄/MgFe₂O₄ nanowires with heterostructure had been successfully synthesized by electrospinning method. The obtained samples were systematically characterized by scanning electron microscopy (SEM), X‐Ray diffraction (XRD), UV–Vis diffuse reflectance spectra (UV‐Vis DR) and Environment scanning electron microscopy (ESEM). The novel CaFe₂O₄/MgFe₂O₄ nanowires exhibit an enhanced photocatalytic activity for degrading of tetracycline (TC) under visible light. Compared with bare CaFe₂O₄ or MgFe₂O₄ samples, the prepared CaFe₂O₄/MgFe₂O₄ (Ca:Mg:Fe = 3:2:10) composited nanowires show the best photocatalytic performance with a degradation efficiency of 40% after 150 min reaction time. This enhancement is attributed to the heterostructure of CaFe₂O₄/MgFe₂O₄ nanowires, which effectively repress the recombination of photo‐generated electrons and holes. Based on heterostructure and energy band positions, the enhancement of mechanism under visible‐light enhances the photocatalytic activity.     

Investigation of a Photochromic Diarylethene with Electron-acceptor Attached

In this contribution, an electron acceptor attached diarylethene derivative was synthesized and fully characterized. The photochromic behavior was investigated in THF. Under exposure of UV and visible light cycles, the solution color can be switched between colorless and yellow smoothly. Fatigue resistance measurements could be repeated 50 times with an acceptable degradation. Due to the electron acceptor attached to the framework of diarylethene, the photo- and thermal-stability were enhanced both. A full-photo mode switch can be established based on the well-defined states by external excitation. The molecular structures of ring-open and ring-closed form were optimized by Dmol³. The distance between photocyclizing atoms in aptiparallel conformation meets the requirement for photochromic reaction. And the calculated absorption wavelengths were also in agreement with the experimental values.