Anodic Stripping Voltammetric Determination of Lead in Tap Water at an Ordered Mesoporous Carbon/Nafion Composite film Electrode

A sensitive mercury‐free lead (Pb²⁺) sensor has been proposed based on an ordered mesoporous carbon and Nafion composite film (OMC/Nafion) coated glassy carbon electrode. The analysis of Pb²⁺ using anodic stripping voltammetry (ASV) includes two steps. Pb²⁺ ions are firstly reduced and deposited on the electrode surface in a Pb²⁺ solution (10 mL) during a preconcentration step biased at ?1.0 V, followed by a measurement step by differential pulse voltammetry (DPV) within the potential range of ?0.8 to ?0.3 V (scan rate: 20 mV/s, frequency: 20 Hz, amplitude: 50 mV, pulse width: 50 ms). Linear calibration curve was found to be from 20 nM to 2 μM for Pb²⁺ with a sensitivity of 17.4±1.38 μA/μM after a 5‐min of preconcentration. The detection limit was estimated to be around 4.60±0.12 nM at the signal to noise ratio of 3. Reproducibility (RSD%) was found to be 3.0% for a single sensor with eight measurements and 4.3% for five sensors prepared with identical procedures. The practical application of the proposed lead sensor was verified by determination of trace level of Pb²⁺ in tap water sample.     

One-step assembly of functionalized gamma-butyrolactones from benzoins or benzaldehydes via an N-heterocyclic carbene-mediated tandem reaction

We describe here a direct, efficient, one-step construction of gamma,gamma-difunctionalized gamma-butyrolactones from benzoins or benzaldehydes via a tandem reaction promoted by 1,3-dimethyl imidazolin-2-ylidene, an N-heterocyclic carbene (NHC). [reaction: see text]     

Structural and orientational studies of chiral N-[4(1-pyrene)butyroyl]-phenylalanine in cast film

Cast films of chiral material N-[4(1-pyrene)butyroyl]-l-phenylalanine (Py-l-Phe) and the racemic modification (the 1:1 mixture of Py-l-Phe and Py-d-Phe) have been investigated in the present study. The microscopic structure, molecular orientation and the aggregation in the film have been studied by using ultraviolet-visible (UV-vis) and infrared (IR) spectroscopy. When a cast film is formed from the chloroform solution at room temperature, the J-aggregates of Py-l-Phe and Py-d-Phe are observed by UV-vis spectra. A comparison of Fourier transform infrared (FT-IR) transmission and reflection-absorption (RA) spectroscopy has been applied to reveal the orientation and structural characterization of the cast films. It has been found that the pyrenyl ring in the cast film of Py-l-Phe assumes a nearly vertical orientation with respect to the surface of the solid substrate. And there are two different hydrogen bonding species, cyclic dimer and linear dimer, exist in carboxyl groups in cast films. The detailed analysis of the OH and NH stretching modes of Py-l-Phe and Py-d-Phe allows us to reveal the hydrogen bonds existing in the films.     

Coacervation of copolymer of diallyldimethylammonium chloride and sodium styrenesulfonate aqueous solution

Coacervate behavior of polyelectrolyte complexes has been studied by many papers. Few studies have focused on the coacervate behavior of amphoteric polymer. In this study, amphoteric copolymer of diallyldimethylammonium chloride (DM) and sodium styrenesulfonate (SS) (the copolymer was noted as DMS) was synthesized with the mole content of SS to DM ranged from 0 to 10%. Firstly, DMS was characterized by static light scattering, FTIR, ¹H-NMR, TGA and DSC. Then, its phase and coacervate behaviors were studied. Turbidity was utilized as an indicator for the coacervate formation. It was found that when the SS content was more than 4 mol%, DMS coacervate would be formed in deionized water at a certain concentration. Temperature and pH have no effect on the formation of DMS coacervate. Meanwhile, salts has a great influence on the DMS coacervation. Unlike the results of the other polyelectrolyte complexes, Na₂SO₄, Na₂HPO₄, NaCOOCH₃, sodium citrate and NaI cannot prevent the DMS coacervate formation. However, the addition of NaCl, NaNO₃, NaBr and NaSCN can prevent the coacervate formation. The influence cannot be described by Hofmeister-like behavior. Results of surface tension and fluorescence spectrum presented that the driving forces to formation of DMS coacervate are the electrostatic interaction and the intermolecular hydrophobic interaction.     

A theoretical prediction about harnessing ESPT process for HBO derivatives

The different excited-state behaviors involved in excited-state proton transfer (ESPT) process of a series of 2-(2-hydroxyphenyl)benzoxazole (HBO) derivatives have been theoretically investigated. The primary bond lengths and bond angles were analyzed. Coupling with the infrared (IR) vibrational spectra, we confirmed that the intramolecular hydrogen bond O–H···N should be strengthened in the S₁ state, which might provide the possibility for ESPT reaction, whereas introducing the fused rings may weaken the hydrogen bond in excited state. By investigating the vertical excitation process, the charge redistribution was explored. It is found that the electron-accepting –NO₂ and –COOH would facilitate the ESPT reaction. With adding fused rings to HBO, less charge transfer exists in the transition process, which can reasonably explain the weakening hydrogen bond phenomenon in excited states. Via constructing the potential energy curves of both S₀ and S₁ states, we further confirm that electron-accepting substitutions could promote the ESPT process for HBO systems. And fused rings do inhibit ESPT reaction to a great extent. We believe this work not only elaborates the different excited-state proton transfer behaviors for a series of HBO derivatives but also presents a new harnessing ESPT process through substitutional effects.     

Synthesis and red electroluminescence of a dimesityl-functionalized bistetracene

The single crystal analysis of the as-prepared 8,16-dimesityltetraceno[2,1,12,11-opqra]tetracene (DMTA) suggests that the parent bistetracene backbone is almost in a plane without any intermolecular p-stacking interaction. The fabricated devices based on DMTA as an emitter exhibit a maximum brightness of 632 cd/m² at 14.7 V with the CIE coordinate of (0.623, 0.349).     

Potassium Amide‐Catalyzed Benzylic C−H Bond Addition of Alkylpyridines to Styrenes

The benzylic functionalization of alkylpyridines is an important pathway for pyridine derivatives synthesis. The reaction partners, however, were mostly limited to highly reactive polar electrophiles. Herein, we report a potassium amide‐catalyzed selective benzylic C?H bond addition of alkylpyridines to styrenes. Potassium bis(trimethylsilyl)amide (KHMDS), a readily available Brønsted base, showed excellent catalytic activity and chemoselectivity. A series of alkylpyridine derivatives, including benzylic quaternary carbon substituted pyridines, were obtained in good to high yield. Preliminary mechanistic studies revealed that the deprotonation equilibrium is probably responsible for the excellent selectivity.     

1999-2016年期刊《绿色化学》载文的计量分析

绿色化学是新兴的学科交叉领域,了解其知识体系的发展及研究态势,有助于讨论当代学科的发展特点。本文选取该领域的权威期刊《绿色化学》(Green Chemistry)作为研究对象,运用Cite Space与VOSviewer等可视化工具对1999~2016年该刊载文进行了计量分析。研究表明,《绿色化学》自创刊以来,其影响因子与载文量快速增长,学术研究进展较快。目前,该领域的核心地区、机构、研究人员集中在美国、中国、英国、德国、荷兰等国家,国际合作十分频繁。绿色化学领域的研究热点包括离子液体、生物质、催化等主题。     

不对称氢化杂环亚胺合成四氢吡咯/吲哚[1,2-a]并吡嗪

报道了一种铱催化3,4-二氢吡咯并吡嗪和3,4-二氢吲哚[1,2-a]并吡嗪的不对称氢化合成相应的1,2,3,4,-四氢吡咯/吲哚[1,2-a]并吡嗪化合物的方法.该催化体系适用于芳基取代的底物和烷基取代的底物,反应收率高达99%,对映选择性过量值最高为95%.该反应操作简单,原子经济性好.