Ba（n，x）~（134）Cs，~（134）Ba（n，2n）~（133）Ba，

用中子活化法相对于５４Ｆｅ（ｎ，Ｐ）５４Ｍｎ反应，在１３．５０—１４．８０ＭｅＶ中子能区测量了Ｂａ（ｎ，ｘ）１３４Ｃｓ，１３４Ｂａ（ｎ，２ｎ）１３３Ｂａ，１４０Ｃｅ（ｎ，２ｎ）１３９Ｃｅ，１４２Ｃｅ（ｎ，２ｎ）１４１Ｃｅ和２３Ｎａ（ｎ，２ｎ）２２Ｎａ的反应截面．并将所测的结果和其他作者的结果进行了比较，中子能量是用９０Ｚｒ（ｎ，２ｎ）８９ｍ＋ｇＺｒ反应和９３Ｎｂ（ｎ，２ｎ）９２ｍＮｂ反应截面比法测定的。     

双模含失谐均匀加宽激光的不稳定性与混沌

研究了双模含失谐均匀加宽激光的不稳定与混沌行为，在不同失谐情况下给出了激光经Ｈｏｐｆ分岔而出现洛仑茨不稳定的判据，它与模式跳变不稳定共同构成了激光的不稳定边界，并且模拟发现洛仑茨不稳定在一定条件下将触发激光模式的跳变，从而表现出双模所特有的非稳定现象。     

乙醇-水混合溶液中1-苯基-3-甲基-4-苯甲酰基吡唑酮-5对Nd(Ⅲ), Eu(Ⅲ),Ho(Ⅲ)的萃取及其机理

在乙醇－水混合溶液中，1－苯基－3－甲基－4－苯甲酰基吡唑酮－5与Nd(Ⅲ）,Eu(Ⅲ）,Ho(Ⅲ）等及乙醇形成了萃合物，使萃取分配比明显提高。利用斜率法研究了萃取机理。借助红外（IR）、元素分析、热分析（TG－DTA）等手段对萃合物进行了表征。     

激光除锈过程的实时监测技术研究

对激光除锈过程中的实时监测技术进行了实验研究,结果表明:除锈过程中产生的声波强度会随着表面清洁度的变化而发生明显的变化,声波信号包含了除锈过程中的大量信息,可作为激光除锈实时监测的基本信号.     

N-[(2,2–propinyldiferrocenyl)methinyl]benzoyl hydrazone and its bivalent transition metal complexes

Transition Metal Chemistry -     

Design and performance analysis of beam steering birefringent mercurous chloride acousto-optic device

I.IntroductionThepcrformanccsofAcousto-optic(AO)dcviccareoftenlimitcdbythepropertiesofAOmcdiawhenitisusedinAOsigna1processingsystems.Thespectrumanalyzersandcorre1ationreceivers,forinstancc,areexpcctcdtoimprovcthereso1utionanddynamicrangcwhilereducingtheproccssorvolume.Rccent1y,ancwclassofmateria1s,themercurousha1ides,promiscstocontributeimportantsolutionstosuchnccdsandisrefincdtopractica1uti1izations.Themecurousha1ideweconsidcrinthispapcrismecurouschloride(Hg,C1,).Thesing1ecrystalofHg,Cl…     

Analysis method of the effect of fabrication errors on a planar waveguide demultiplexer

The impact of fabrication errors on a planar waveguide demultiplexer is analyzed based on an analytical method. The explicit expression of the transfer function taking into account phase and amplitude errors is presented in order to analyze the loss and crosstalk of the demultiplexer caused by fabrication errors. A basic requirement for the demultiplexer with a certain crosstalk criterion can be easily obtained. Using an etched diffraction grating demultiplexer as an example, it is shown that the analytical results have a good agreement with results from a numerical method.     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.     

裂解气相色谱质谱法研究增塑剂邻苯二甲酸二甲酯的热降解机理

用裂解气相色谱-质谱联用方法研究了橡胶产品中使用的增塑剂邻苯二甲酸二甲酯(DMP)在不同温度条件下的热裂解行为.对不同温度条件下裂解产物的分析表明,在初始阶段DMP的裂解产物主要为二氧化碳、苯、甲苯和苯甲酸甲酯.随着温度的升高苯甲酸甲酯进一步裂解成为分子质量更小的自由基,并发生稠环化反应形成更稳定的菲、蒽、间-联三苯、三亚苯等芳香族多环化合物.根据分析实验提供的裂解产物信息和有机物热裂解化学反应的原理对DMP的热裂解反应机理作了探讨,表明在废旧合成橡胶热裂解回收过程中,增塑剂DMP的高温裂解会产生多环芳烃污染物.应选择合适裂解工艺和裂解温度,以减少对环境的污染.