Preparation of styrene–divinyl benzene copolymer-supported platinum complexes and their catalytic properties in hydrosilylation

A new type of catalyst for the hydrosilylation of unsaturated monomers with dichloromethylsilane (DCMS) was prepared, which consisted of thiolmethylene-substituted styrene–divinyl benzene copolymer and platinum. When using DCMS as a hydrosilylation agent, these catalysts showed a high activity in the hydrosilylation of vinyl and acetylene monomers as styrene, alkyl vinyl silanes, acetylene, phenyl acetylene, butyl acrylate. The activities of catalysts were not significantly reduced even after 20 reuse cycles.     

Preparation of polymer-protected Pt/Co bimetallic colloid and its catalytic properties in selective hydrogenation of cinnamaldehyde to cinnamyl alcohol

A polymer-protected Pt/Co bimetallic colloid with a molar ratio of 3:1 has been prepared by a polyol process. Over the above Pt/Co bimetallic colloid catalyst, cinnamaldehyde can be selectively hydrogenated to cinnamyl alcohol with 99.8% selectivity at 96.2% conversion.     

The Effect of Different Inorganic Salts on the Growth Rate of NaCl Crystallized from Sea Water

A comprehensive experimental study on the effect of fourteen different inorganic salts on the growth rate of NaCl single crystals is presented. The fourteen different inorganic salts are chosen as they are present in Chinese sea water. The impurity content of each salt has been varied according to its presence in the natural sea water. The impurities are differentiated in groups related to their effect on the growth rate of NaCl. The examined impurities are: MgCl₂ · 6 H₂O, KCl, SrCl₂, NaBr, Nal, NaF, Na₂SO₄, NaBO₂ · 4 H₂O, Na₂CO₃, Na₂SiO₃ · 9 H₂O, ZnSO₄, CuSO₄ · 5 H₂O, PbCl₂, and K₄Fe(CN)₆.     

Polymerization of N-phenylmaleimide with rare earth coordination catalysts

A highly active rare earth coordination catalyst composed of neodymium acetylacetonate, dibutylmagnesium, and hexamethylphosphoramide (mole ratio 1:7:14) for the polymerization of N-phenylmaleimide (N-PMI) was developed. The resulting poly(N-PMI) has high molecular weight (M̄_n = 9.0 × 10⁴) and shows excellent thermal stability.     

低温液体无损贮存压力升高的实验与计算

准确、简单地预测低温液体无损贮存时的压力升高具有重要的实用价值。对一低温容器利用液氮为介质进行了多次无损贮存实验,利用多元线性回归方法对实验数据进行分析和检验。分析表明无损贮存时间、初始充满率对压力升高的影响较大,而环境温度的影响可以忽略,并拟合出了压力升高的计算公式。计算结果和实验结果在很大范围内能够较好地吻合。该种计算方法在预测低温液体无损贮存压力升高时有较高的准确性与可靠性。     

A Double-Site Chemodosimeter for Selective Fluorescence Detection of a Nerve Agent Mimic

A novel two-site chemodosimeter (SWJT-4) based on fluorescein skeleton to detect diethyl chlorophosphate (DCP) was designed and synthesized. It is a turn-on fluorescent probe for DCP with good selectivity and obvious color change in aqueous solution. Interestingly, the two oxime groups of SWJT-4 as dual response sites initiated different reactions with DCP to form a cyano group and an isoxazole ring, respectively. The corresponding mechanism was confirmed by ¹H NMR, MS and DFT calculation. Moreover, SWJT-4 could be used as a fluorescent test paper to detect DCP vapor.     

Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries

To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries.     

紫外光激发下氧化锌纳米线的发光特性研究

室温条件下,用355 nm的激光激发氧化锌纳米线,测量了其发光光谱.观察到半宽度较小、峰值波长约382 nm的紫光峰和半宽度较宽、峰值波长约507 nm的绿光峰;两峰的发光强度随激发光功率密度的变化而变化,且均存在饱和效应,但各自的变化规律及饱和值的大小不同;紫光峰的中心波长随激发光功率密度的增加而发生了明显的红移.对两峰产生的机理、强度饱和值存在的原由、强度随激发光功率密度变化及紫光峰红移的起因进行了分析.     

环形光纤声发射传感器的相位调制特性研究

提出了一种基于光纤Sagnac干涉仪的环形传感器,用于固体表面传播的超声波的检测.这种传感器的特点是能够精确地检测由固体表面传播的超声波产生的微弱振动.当超声波信号通过光纤传感器的两个臂到达探测器时,干涉仪的输出光强度受到了超声信号的调制.通过检测干涉仪的输出光强度并利用Fourier变换,测得了超声信号的振幅和频率.而且对传感系统的位相调制特性进行了仿真,并对实验结果进行了分析,结果表明该系统可用于固体表面传播的超声波频率特征的识别.     

Single-Step Hydrothermal Synthesis of Biochar from H3PO4-Activated Lettuce Waste for Efficient Adsorption of Cd(II) in Aqueous Solution

Developing an ideal and cheap adsorbent for adsorbing heavy metals from aqueous solution has been urgently need. In this study, a novel, effective and low-cost method was developed to prepare the biochar from lettuce waste with H₃PO₄ as an acidic activation agent at a low-temperature (circa 200 °C) hydrothermal carbonization process. A batch adsorption experiment demonstrated that the biochar reaches the adsorption equilibrium within 30 min, and the optimal adsorption capacity of Cd(II) is 195.8 mg∙g⁻¹ at solution pH 6.0, which is significantly improved from circa 20.5 mg∙g⁻¹ of the original biochar without activator. The fitting results of the prepared biochar adsorption data conform to the pseudo-second-order kinetic model (PSO) and the Sips isotherm model, and the Cd(II) adsorption is a spontaneous and exothermic process. The hypothetical adsorption mechanism is mainly composed of ion exchange, electrostatic attraction, and surface complexation. This work offers a novel and low-temperature strategy to produce cheap and promising carbon-based adsorbents from organic vegetation wastes for removing heavy metals in aquatic environment efficiently.