Total synthesis of kendomycin: a macro-C-glycosidation approach

Kendomycin, also known as (-)-TAN 2162, is a novel polyketide-derived ansamycin isolated from Streptomyces sp., which exhibits potent antagonist and agonist activities at the endothelin and calcitonin receptors, respectively. This bacterial metabolite also possesses a strong antibiotic activity against a range of gram-positive and -negative bacteria and cytostatic effects on the growth of human cancer cell lines. When a novel macroglycosidation reaction is employed as the key step, the first enantioselective total synthesis of kendomycin has been accomplished. A Friedel-Crafts-type ring closure of the acyclic precursor containing tetrahydropyran and benzofuran moieties produces the macrocycle as a single stereoisomer in good yield, thus establishing the aryl C-glycosidic linkage of the ansa core. This reaction requires a phenolic glycosyl acceptor and appears to proceed through a rapid O-glycosidation followed by a slow rearrangement to an aryl C-glycoside. The requisite secomacrocycle is prepared by the Pd(0)-catalyzed B-alkyl Suzuki-Miyaura cross-coupling of two subunits, which in turn can be expeditiously assembled from readily available building blocks in a modular fashion.     

K对Mn—Co—O的结构及氧化活性的影响

利用XRD,TPD,TFD-MS及催化氧化反应等实验技术,研究了K对Mn-Co-O的结构及氧化活性的影响。XRD结果表明,Mn-Co-O系已形成反尖晶石型的MnCo_2O_4结构;K-Mn-Co-O系中除MnCo_2O_4型结构外,还有新相KMnO_2存在。根据O_2的TPD-MS及吡啶的TPD结果,Mn-Co-O中添加适量的K能提高供氧活性和增加供氧数目,但酸中心数目减少,强度降低。K对Mn-Co—O催化剂氧化活性的影响随反应物分子结构的不同而异,对乙酸乙脂、苯甲酰氯等极性有机物的完全氧化反应,K能提高氧化活性,但对苯、正己烷等非极性有机物的完全氧化反应,K使其活性降低。     

Meso-tetraaryl cofacial bisporphyrins delivered by Suzuki cross-coupling

The Suzuki cross-coupling methodology provides a facile synthetic approach for the modular preparation of meso-tetraaryl cofacial bisporphyrins anchored by xanthene and dibenzofuran. This synthetic method furnishes cofacial bisporphyrin templates with enhanced steric and electronic protection from mu-oxo formation and oxidative degradation. The ability of these platforms to support multielectron oxidation chemistry mediated by proton-coupled electron transfer (PCET) is demonstrated by their reactivity for the catalytic disproportionation of hydrogen peroxide to oxygen and water.     

Taxumairols X--Z,new taxoids from Taiwanese Taxus mairei

In addition to 19-dydroxybaccatin III, 1beta-hydroxy-5 alpha-deacetylbaccatin I, taxayuntin G and 13-O-deacetyltaxumairol Z (4), three new taxane diterpenoids, taxumairols X (1), Y (2), Z (3) have been isolated from extracts of the Formosan Taxus mairei (LEMEE & LEVL.) S. Y. HU. Compounds 1-2 belong to the 11(15-->1)-abeo-taxane system, having a tetrahydrofuran ring at C-2, C-3, C-4 and C-20. The new compound 3 and 4, which was misidentified previously are derivatives of 11(15-->1)-abeo-taxane with an intact oxirane system. The structures of compounds 1-4 were elucidated on the basis of extensive two dimensional (2D)-NMR analysis.     

A preliminary study on the initial elastic adhesion behavior of leucocytes

By treating the cell body as an elastic colloid and applied with the Hertz contact theory of linear elasticity and the lubrication equation of fluid dynamics, the elastic adhesion behavior of leucocytes in close motion toward a plane surface is investigated. The effect of the Stokes number on the deformation profile of the cell is considered during the adhesion period. From the results of numerical simulation, it is found that under certain conditions (i.e. regardless of the magnitude of F for the cases of ST=1 and 3 and ε0.0055 for ST=10), after exhausting all of the incoming kinetic energy, the cell can rest at an equilibrium separation which is close to the ligand–receptor bond length formed between two interacting surfaces.     

Application of Iodide Ion Selective Electrode to the Study of Stepwise Formation Constant and Solubility Product of Lead Iodide

Iodide ion-selective electrode were studied, prepared and applied for the complex formations and solubility product determination. The thermodynamic formation constant of PbI⁺ and the solubility product of PbI₃ were found to be 54 and 9.2 × 10^?9, respectively. The formation constant of PbNO₃⁺ was calculated to be 4.6 from the different formation constant of PbI⁺ in perchlorate and nitrate media.     

Concentration and determination of trace organic pollutants in water

Organic pollutants in water are isolated on a mini-sampler tube containing a macroporous resin. The sorbed pollutants are next thermally transferred to a second sorption tube and then to an analytical column where they are separated and determined by temperature-programmed gas chromatography. Excellent recoveries were obtained for tests in which model organic compounds of various classes were added to water. The water sample is much smaller than that required with previous analytical methods.     

Simultaneous determination of all-trans, 9-cis, 13-cis retinoic acid and retinol in rat prostate using liquid chromatography-mass spectrometry

Since retinoic acid (RA) and RA receptors are key developmental regulators during organogenesis, they might participate in the abnormal development of the prostate caused by early estrogen exposure. In order to test this assumption, a sensitive analytical method that can differentiate 9-cis, 13-cis, and all-trans RA in small tissue samples ( approximately 8 mg) is required. Since retinol is the metabolic precursor to RA, simultaneous quantification of retinol would also provide valuable information. Here, we report a liquid chromatography-mass spectrometry method for simultaneous determination of retinol and 9-cis, 13-cis, and all-trans RA in rat prostate. Mass spectrometric signal responses for RA were compared using positive ion atmospheric-pressure chemical ionization (APCI) and electrospray, as well as positive ion and negative ion APCI. Positive ion APCI was selected for all subsequent analysis for its better sensitivity, and to provide simultaneous determination of retinol and RA. Ventral prostate tissue samples were homogenized and extracted following simple protein precipitation without derivatization. Baseline separation of 9-cis, 13-cis, and all-trans RA standards was obtained by using a non-porous silica C18 column. Selected ion monitoring of the ions m/z 301 and m/z 269 was carried out for mass spectrometric quantitative analysis. The ion of m/z 301 corresponded to the protonated molecule of RA, whereas the ion of m/z 269 corresponded to loss of water or acetic acid from the protonated molecule of retinol or the internal standard retinyl acetate respectively. The method has a linear response over a concentration range of at least three orders of magnitude. The limit of quantitation was determined to be 702 fmol all-trans RA injected on-column. The method showed excellent intra- and inter-assay reproducibility and good recovery, and is suitable for analyzing RA and retinol in small tissue samples (approximately 8 mg).     

Semiclassical approach to collision-induced emission in the presence of intense laser radiation: An aspect in the study of cooperative chemical and optical pumping

Collion-induced emission in molecular systems in an intense laser field is studied using the semiclassical approach, with a view towards cooperative chemical and optical pumping in laser production. The formalism is developed with the electronic-field representation, which treats collision and radiative interaction on the same footing. Electronic-field surfaces can be regarded as forming spectra for spontaneous emission; and particular emission events can be accounted for by propagating classical trajectories on emission electronic-field surfaces. Pre-emission loss from the excited state is dealt with by propagating classical trajectories on a loss surface along a complex contour of emission branch points. This loss surface is derived on the basis of localized radiative couplings between electronic-field states and provides a framework to treat the general problem of discrete state-continuum interactions. The formalism is applied to a two-state, collinear exponential model to compute S-matrix elements and transition probabilities between asymptotic states.     

Fibrous crystalline hydrogels formed from polymers possessing a linear poly(ethyleneimine) backbone

Novel thermoreversible physical hydrogels formed from polymers with linear and star architectures possessing a linear poly(ethyleneimine) (PEI) backbone have been investigated. The hydrogelation occurred simply upon natural cooling of hot aqueous solutions of PEIs to room temperature. The X-ray diffraction and differential scanning calorimetry measurements for the resultant hydrogels unambiguously indicated that the hydrogelation originated from the formation of dihydrate crystalline structures of PEI. These crystalline hydrogels are structurally unique and hierarchical. Microscopic images revealed that the morphologies of the crystalline hydrogels depend on their molecular architectures. The linear PEI resulted in branched fibrous bundles organized by unit crystalline nanofibers with a width of ca. 5-7 nm. The six-armed star with benzene ring core produced fanlike fibrous bundles while the four-armed star with porphyrin core assembled into asterlike aggregates. The critical concentration of gelation (C(G)) was low (about 0.2 approximately 0.3%) and the thermoreversible gel-sol transition temperatures (T(G)) were controllable from approximately 43 to approximately 79 degrees C. The hydrogels formed in the presence of the various aqueous additives including organic solvents, hydrophilic polymers, physical cross-linker, chemical cross-linker, and base enabling modification and functionalization during synthesis. The mechanical properties of the hydrogels could be improved by chemical cross-linking of preformed hydrogels by glutaraldehyde. Physically and physical/chemical cross-linked hydrogels served as excellent template roles in biomimetic silicification, which produced silica-PEI hybrid powder or monolith constructed by nanofibers.