Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Synthesis,crystal structure,electrochemical properties and large optical limiting effect of a novel 3-(E)-ferrocenyl-vinyl-<Emphasis Type="BoldItalic">N</Emphasis>-hexyl carbazole

The novel compound, 3-(E)-ferrocenyl-vinyl-N-hexylcarbazole (FVHC) was first synthesized and fully characterized by elemental analysis, IR, ¹H-NMR, single-crystal X-ray diffraction, ultraviolet (UV) absorption, cyclic voltammograms (CV) and optical limiting (OL) measurements. The result of single crystal X-ray diffraction for the compound reveals that the ferrocenyl and carbazole groups are approximately coplanar, and bridged by double-bond with E configuration, showing that there is a well-delocalized π-electron system in the molecule. The electrochemical investigation indicated that the electron in the FVHC may partially be delocalized over the π-conjugated system and CT process in functionalized carbazole systems. Besides, the compound exhibited strong UV absorption and large optical limiting effect, indicating promising potential applications as useful OL materials.     

Aromatic poly(sulfone sulfide amide imide)s as new types of soluble thermally stable polymers

A new diamine monomer containing flexible sulfone, sulfide, and amide units was prepared via three steps. Nucleophilic chloro displacement reaction of 4‐aminothiophenol with 4‐nitrobenzoyl chloride in the presence of propylene oxide afforded N‐(4‐mercapto‐phenyl)‐4‐nitrobenzamide and subsequent reduction of the nitro intermediate led to 4‐amino‐N‐(4‐mercapto‐phenyl)benzamide. Two moles of this amino thiophenol compound was reacted with bis‐(4‐chloro phenyl)sulfone to provide a novel diamine monomer. The diamine was reacted with aromatic dianhydrides to form polyimides via a two‐step polycondensation method, formation of poly(amic acid)s, followed by chemical imidization. The resulting polymers were characterized and their physical properties including thermal behavior, thermal stability, solubility and inherent viscosity were studied. Copyright © 2007 John Wiley & Sons, Ltd.     

New efficient organocatalytic oxidation of benzylic compounds by molecular oxygen under mild conditions

Efficient aerobic oxidation of benzylic compounds has been achieved under no irradiation using a new organocatalytic system in the presence of acridine yellow and N-hydroxyphthalimide with assistance of a catalytic amount of molecular bromine. Various substrates, especially alkylaromatics, were effectively oxygenated to the corresponding carbonyl compounds with molecular oxygen as oxidant under mild conditions. For instance, indan was oxidized with 92% conversion and 79% selectivity for 1-indanone under 0.3 MPa of O₂ at 75 °C.     

Inhibition of the toxic byproduct during photocatalytic NO oxidation via La doping in ZnO

It is of a great challenge to develop semiconductor photocatalysts with potential possibilities to simultaneously enhance photocatalytic efficiency and inhibit generation of toxic intermediates.In this study,we developed a facile method to induce the La doping and cationic vacancie(V(Zn))on ZnO for the highly efficient complete NO oxidation.The photocatalytic NO removal efficiency increases from 36.2%to 53,6%.Most importantly,a significant suppressed NO2 production also has been realized.According to the DFT calculations,ESR spectra and in situ FTIR spectra,the introduction of La^3+induce the redistribution of charge carriers in La-ZnO,which promote the production of·O2^- and lead to the formation of V(Zn)for the formation of·OH,contributing to the complete oxidation of NO to nitrate.Besides,the conversion pathway of photocatalytic NO oxidation has been elaborated,This work paves a new way to simultaneously realize the photocatalytic pollutants removal and the inhibition of toxic intermediates generation for efficient and safe air purification.     

The formation of mesoporous TiO2 spheres via a facile chemical process

The mesoporous TiO(2) solid and hollow spheres have been synthesized via a controllable and simple chemical route. Structural characterization indicates that these TiO(2) mesoporous spheres after calcined at 500 degrees C have an obvious mesoporous structure with the diameters of 200-300 nm for solid spheres and 200-500 nm for hollow spheres. The average pore sizes and BET surface areas of the mesoporous TiO(2) solid and hollow spheres are 6.8, 7.0 nm and 162, 90 m(2)/g, respectively. Optical adsorption investigation shows that TiO(2) solid and hollow spheres possess a direct band gap structure with the optical band gap of 3.68 and 3.75 eV, respectively. A possible formation mechanism for TiO(2) solid and hollow spheres is discussed.     

Synthesis and red luminescence of Pr-doped CaTiO3 nanophosphor from polymer precursor

Uniform and sphere-like nanoparticles of crystalline Pr³⁺-doped CaTiO₃ have been prepared from complex polymer precursor at 600°C, in which, metal atoms are previously dispersed by citric acid in ethylene glycol solvent. The decomposition process of the precursor, crystallization, and particle sizes of CaTiO₃ have been investigated by using thermal analysis, powder X-ray diffraction and transmission electron microscopy. Diffuse reflectance spectra, photoluminescence and decay curve indicate that a strong red emission located at the nearly NTCS “ideal red” site is deduced from the energy transfer from the band gap absorption to doping Pr³⁺ ions. The thermoluminescence curves exhibit that a potential long phosphorescent material based on Pr³⁺-doped CaTiO₃ will be explored in future.     

The first example of enantioselective isocyanosilylation of meso epoxides with TMSCN catalyzed by novel chiral organogallium and indium complexes

The desymmetrization ring opening of meso epoxides using trimethylsilyl cyanide catalyzed by organogallium and indium complexes with binaphthol monoether derivatives as chiral ligands gave beta-isocyanohydrins with moderate to excellent enantioselectivities of up to 95% ee.     

Physicochemical and structural properties of bacteriostatic sulfonamides: Theoretical study

A theoretical study at the Hartree–Fock and density functional theory levels is performed on sulfonamide‐type bacteriostatic compounds with the aim to provide an insight into their structure–activity relationship. The basicity of the p‐amino group is analyzed by means of the proton affinities and the protonation energies, showing that molecules presenting bacteriostatic activity are less basic, i.e., they are characterized by larger protonation energies and smaller proton affinities. The acidity of the amide group is analyzed through the deprotonation energy. The results reveal that the more acidic molecules present a larger bacteriostatic activity. This result is also confirmed from a study of bond orders. A bond order analysis of the amide group suggests that the electron attracting group in these molecules is responsible for the increase in acidity. The charge of the SO₂ group is also shown to be affected by the presence of the electron attracting group and consequently related to the acidity of the molecules. A geometric analysis shows that structures in which the amino group is more coplanar with respect to the benzenic ring possess larger bacteriostatic activity. A conformational analysis of these molecules illustrates that active molecules have relatively larger torsion energy barriers. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 165–172, 2003     

Unusually sharp dependence of water exchange rate versus lanthanide ionic radii for a series of tetraamide complexes

The tetraamide ligand, DOTA-tetra(glycine ethyl ester), forms complexes with the lanthanide(III) cations that exist in solution predominantly as the square antiprism structure with single, slowly exchanging inner-sphere water molecule. Variable-temperature 1H and 17O NMR studies revealed that the bound water lifetimes in these complexes were sharply dependent upon the ionic radius of Ln3+ cation. A novel lanthanide-induced shift technique was used to unmask the bound water 17O resonance of SmL3+ and YL3+ complexes from the bulk water resonance. The bound water lifetime (tauM298) was approximately 800 mus in the EuL3+ complex but became much shorter (several microseconds) for Ln3+ cations with larger and smaller ionic radii. This demonstrates that water exchange is exquisitely fine-tuned in this macrocyclic tetraamide system and that a variety of Ln3+ complexes meet with the exchange requirement, Deltaomega*tauM >/= 1, necessary for an efficient MT agent.