Synthesis and electrochemical characteristics of Ta-N thin films fabricated by cathodic arc deposition

Ta-N thin films were deposited on AISI 317L stainless steel (SS) substrates by cathodic arc deposition (CAD) at substrate biases of −50 and −200 V. The as-deposited films were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDX). The results show that stoichiometric TaN with hexagonal lattice (3 0 0) preferred orientation was achieved at the bias of −200 V. On the other hand, Ta-rich Ta-N thin film deposited at −50 V shows amorphous nature. According to the XPS result, Ta element in the films surface exist in bonded state, including the Ta-N bonds characterized by the doublet (Ta 4f_7/2 = 23.7 eV and Ta 4f_5/2 = 25.7 eV). Electrochemical properties of the Ta-N coated stainless steel systems were investigated using potentiodynamic polarization and electrochemical impedance spectroscope (EIS) in Hank's solution at 37 °C. For the Ta-N coated samples, the corrosion current (i_corr) is two or three orders of magnitude lower than that of the uncoated ones, indicating a significantly improved corrosion resistance. Growth defects in the Ta-N thin films produced by CAD, however, play a key role in the corrosion process, especially the localised corrosion. Using the polarization fitting and the EIS modelling, we compared the polarization resistance (R_p) and the porosity (P) of the Ta-N coatings deposited at different biases. It seems that Ta-N film with comparatively lower bias (−50 V) shows better corrosion behavior in artifical physiological solution. That may be attributed to the effect of ion bombarding, which can be modulated by the substrate bias.     

Triplet pairing states with equal spins in ferromagnet/superconductor heterojunctions for noncollinear magnetizations

Four-component Bogoliubov-de Gennes equations are applied to study tunneling conductance spectra of ferromagnet/ferromagnet/d-wave superconductor (F₁/F₂/d-wave S) tunnel junctions and to find out signs of spin-triplet pairing correlations induced in the proximity structure. The pairing correlations with equal spins arises from the novel Andreev reflection (AR), which requires at least three factors: the usual AR at the F₂/S interface, spin flip in the F₂ layer, and superconducting coherence kept up in the F₂ layer. Effects of angle α between magnetizations of the two F layers, polarizations of the F₁ and F₂ layers, the thickness of the F₂ layer, and the orientation of the d-wave S crystal on the tunneling conductance are investigated. A conversion from a zero-bias conductance dip at α = 0 to a zero-bias conductance peak at a certain value of α can be seen as a sign of generated spin-triplet correlations.     

Accurate determination of the absolute phase and temporal-pulse phase of few-cycle laser pulses

A Fourier analysis method is used to accurately determine not only the absolute phase but also the temporal-pulse phase of an isolated few-cycle (chirped) laser pulse. This method is independent of the pulse shape and can fully characterize the light wave even though only a few samples per optical cycle are available. It paves the way for investigating the absolute phase-dependent extreme nonlinear optics, and the evolutions of the absolute phase and the temporal-pulse phase of few-cycle laser pulses.     

光学成像在疾病诊断中的应用

当前，医生们利用各种成像技术与疾病进行斗争，其中光学成像技术是获得高分辨率图像的新方法，其原理是每种生物介质具有各自特有的光谱特性，可赖以区分病变组织和正常组织，或对潜在问题准确定位。而光学相干层析则是最精确的光学成像技术，可提供１０～２０μｍ量级的高分辨率及比迄今为止任何其他技术都高的灵敏度。本文着重讨论光学相干层析术的基本原理及目前发展状况     

EIS型光寻址电位传感器及其对液体分析的研究

介绍了ＥＩＳ型光寻址电位传感器系统，并以实验为基础，研究了偏置电压，光调制频率，光功率等参数对ＥＩＳ型光寻址电位传感器光电压的影响，并提出了优化参数，为光寻址电位传感器在液体分析中的应用奠定了基础。同时发现光电压与待测液ｐＨ之间具有超能斯特响应关系的现象。     

用特征多项式构造相移干涉相位提取算式

用相移干涉术测量物体表面形貌时，各种误差因素特别是相移器移相误差的影响使得表面形貌的测量偏离了实际值，甚至会产生形貌失真的现象。采用傅里叶分析的方法对相位提取算式作了理论分析，并根据特征多项式设计分析理论构造了新的、对移相误差不敏感的相位提取算式。经实验验证，该算法有效地提高了相移干涉仪测量表面形貌的Ra值，重复测量精度达5倍以上，使测量结果更接近实际值。     

Resolution and sensitivity enhancements in strong grating based fiber Fabry–Perot interferometric sensor system utilizing multiple reflection beams

We investigate an asymmetric intensive fiber Bragg grating (FBG) defined Fabry–Perot (F–P) sensor system decoded by a multiple-path-matched Michelson interferometer. The interrogation of higher order reflection beams cannot only solve the problem of the degraded resolution induced by the spectral mismatch of the FBGs, but also amplify the effect of the fiber strain on the phase of the light. We demonstrate multiple reflection beams in the F–P cavity based on the concept of the FBG effective length for constructing respective interrogation interferometers, and present a cost function with optimized system parameters to improve noise properties. The performances of interrogating the second, third and fourth order reflection beams are compared in a strain sensing experiment arrangement. Under the condition of the same optical path length mismatch, the interrogation of the fourth order reflection beam can achieve 9.8 dB sensitivity enhancement and 3 dB resolution promotion compared with the result using the second order reflection beam.     

蓝宝石晶体的光谱精细结构、零场分裂参量及晶体结构

运用不可约张量算法和群理论构造了C3v对称晶场中3d5组念离子的252阶可完全对角化的微扰哈密顿矩阵.用此矩阵计算了Al2O3:Fe3 晶体的光谱精细结构、零场分裂参量(D,a-F)、品体结构,其理论计算值与实验值相符合,并研究了自旋四重态、自旋二重态分别对基态能级的影响,证明了自旋四重态对基态能级的贡献是主要的,自旋二重态对基态能级的贡献虽很小,但却是不可忽略的.进一步研究了SO梢合作用、SS耦合作用对Al2O3:Fe3-品体的光谱精细结构和零场分裂参量的影响,结果发现SO耦合作用是最主要的,SS耦合作用也是不可忽略的.     

Effects of the microstructure slab with pillars on light extraction of GaN light-emitting diode

The positive z direction relative light extraction efficiency of GaN light-emitting diodes with microstructure slab is calculated by three-dimensional finite-difference time-domain method, where the microstructure slab consists of a graphite lattice of pillars. The results show that the two-dimensional graphite-arranged pillars suppress light extraction. When there is a thick pillar in the middle of the pillars, the structure can enhance light extraction of the light-emitting diodes. The tower-like pillars, which are thin on the top of the pillars and thick on the bottom of the pillars, benefit the light extraction when the angle of the tower-like pillars is proper.     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。