Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials

As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.     

白光发光二级管用红色荧光粉LiSrBO3: Eu3+的制备与发光性能研究

采用高温固相法制备了LiSrBO₃:xEu³⁺ 荧光粉, 并通过XRD, 红外(FITR) 和荧光光谱(PL) 等对其表征. 结果表明, LiSrBO₃: Eu³⁺ 荧光粉可被波长为395 nm 的紫外线和466 nm 的蓝光有效激发, 且发射主波长为612 nm (Eu³⁺的电偶极跃迁⁵D₀ →⁷F₂) 的红光. 研究了Eu³⁺ 掺杂浓度对LiSrBO₃: Eu³⁺ 材料发光强度的影响, Eu³⁺ 掺杂浓度为6% 时样品的发射强度最大, 并且证实Eu³⁺ 之间的能量传递机制为电偶极子- 电偶极子相互作用. Li⁺, Na⁺, K⁺ 作为电荷补偿剂的引入全部导致LiSrBO₃: Eu³⁺ 材料发射强度增强, 其中, Li⁺ 的引入要优于Na⁺ 和K⁺. 少量Al³⁺的掺杂降低了Eu³⁺ 所处格位的对称性, 增强了Eu³⁺ 的612 nm 的电偶极发射, 改善了LiSrBO₃: Eu³⁺ 红色材料的色纯度. 关键词： 白光发光二级管 光致发光 浓度猝灭 电荷补偿剂     

基于遗传算法的混沌系统二自由度比例-积分-微分控制研究

二自由度比例-积分-微分(PID)控制算法简单、实用，但将其应用于复杂非线性系统控制时参数整定困难.运用改进的遗传算法进行二自由度PID控制器参数优化，参数优化的收敛速度快、准确，将其应用于Chen氏混沌系统和同步电动机混沌系统的控制中，仿真研究收到良好的控制效果. 关键词： 混沌系统 遗传算法 比例-积分-微分控制     

High power-added-efficiency AlGaN/GaN HEMTs fabricated by atomic level controlled etching

An atomic-level controlled etching(ACE)technology is invstigated for the fabrication of recessed gate AlGaN/GaN high-electron-mobility transistors(HEMTs)with high power added efficiency.We compare the recessed gate HEMTs with conventional etching(CE)based chlorine,Cl₂-only ACE and BCl³/Cl₂ACE,respectively.The mixed radicals of BCl₃/Cl₂were used as the active reactants in the step of chemical modification.For ensuring precise and controllable etching depth and low etching damage,the kinetic energy of argon ions was accurately controlled.These argon ions were used precisely to remove the chemical modified surface atomic layer.Compared to the HEMTs with CE,the characteristics of devices fabricated by ACE are significantly improved,which benefits from significant reduction of etching damage.For BCl₃/Cl₂ACE recessed HEMTs,the load pull test at 17 GHz shows a high power added efficiency(PAE)of 59.8%with an output power density of 1.6 W/mm at Vd=10 V,and a peak PAE of 44.8%with an output power density of 3.2 W/mm at Vd=20 V in a continuous-wave mode.     

两束啁啾脉冲控制下的H+D+光缔合反应研究

从理论上研究了两束啁啾脉冲控制H+D⁺的光缔合反应. 第一束脉冲用来加速碰撞伴的碰撞速度,第二束脉冲用来增加产物HD⁺的产率. 结果表明:第一束脉冲的参数决定了第二束脉冲的优化参数以及产物HD⁺的布居. 产物的布居可以通过调节两束脉冲的延迟时间得到控制. 关键词： 光缔合 +分子')" href="#">HD⁺分子 啁啾脉冲 波包     

NOVEL FORMATION AND DECAY MECHANISMS OF NANOSTRUCTURES ON THE SURFACE

For decades the research on thin-film growth has attracted considerable attention as these kinds of materials have the potential for a new generation of device application. It is known that the nuclei at the initial stage of the islands are more stable than others and certain atoms are inert while others are active. In this paper, by using kinetic Monte Carlo simulations, we will show that, when a surfactant layer is used to mediate the growth, a counter-intuitive fractal-to-compact island shape transition can be induced by increasing deposition flux or decreasing growth temperature. Specifically, we introduce a reaction-limited aggregation (RLA) theory, where the physical process controlling the island shape transition is the shielding effect of adatoms stuck to the stable islands on the incoming adatoms. Moreover, the origin of a transition from triangular to hexagonal and then to inverted triangular as well as the decay characteristics of three-dimensional islands on the surface and relations of our unique predictions with recent experiments will be discussed. Furthermore, we will present a novel idea to make use of the condensation energy of adatoms to control the island evolution along a special direction.     

荞麦花多糖的提取及含量测定

采用热水提取、乙醇沉淀的方法从荞麦花中提取出了水溶性多糖,采用硫酸-苯酚法在波长为497nm处进行了糖含量的测定,求得其校准曲线的回归方程为y=0.00508x 0.0294,相关系数为r=0.9978.平均回收率为99%-103%,RSD为0.74%.结果显示:荞麦花多糖的产率为2.5%.糖含量为41.63%.     

蒙成药如达多糖的研究

从蒙成药如达中提取水溶性多糖,硫酸-苯酚法测定其含量。平均回收率为99.8%,RSD为0.94%。GC测定了水溶性多糖的组成为葡萄糖、半乳糖和甘露糖。其摩尔比为:6.33:3.25:1.59。