Determination of aqueous ozone for potable water treatment applications by chemiluminescence flow-injection analysis. A feasibility study

The feasibility of determining aqueous ozone by chemiluminescence flow-injection analysis (CL-FIA) was studied for applications in potable water treatment. The ozonated water sample is injected into a pure water carrier and mixed with a dye reagent in front of a photodetector. Many reagents undergo fast CL reactions with aqueous ozone. Most of these reactions display considerable selectivity for ozone over other oxidants of importance in water treatment. Even when there is steady-state response to another oxidant, significant discrimination against the interferents is possible by taking advantage of the much faster kinetics of the CL reaction with ozone. A simple design of a Siemens-type ozone generator and preparation of standard ozone solutions are also described.     

Strong, low-energy two-photon absorption in extended amine-terminated cyano-substituted phenylenevinylene oligomers

Three quadrupolar oligophenylenevinylenes with five rings in the conjugated backbone, terminal donor groups, and various acceptors and/or donors along the backbone were synthesized and their two-photon spectroscopic properties investigated. These chromophores exhibit large two-photon absorption cross sections over a wide wavelength range and two distinct peaks, the strongest of which (deltamax > 3600 GM) is observed at 960-970 nm, a wavelength close to twice the value of the linear absorption maximum (2lambda(1)max). The findings on these chromophores are compared with those for analogous molecules with shorter conjugation length, for which the main two-photon band is at significantly shorter wavelength than 2lambda(1)max.     

Trace element exposure in man by instrumental neutron activation analysis of hair

A nondestructive instrumental neutron activation technique was used to analyze human hair samples collected from people living in metropolitan and rural areas in Korea. Samples were also collected from factory workers and cancer patients. Hair from metropolitan area residents contain higher concentrations of Ca, Mg, Zn, Cu, Na, Br, Mn, I and S than rural area residents. Concentrations of I and S from cancer patients, Mg, Zn, Al, Na, Mn and As from glassware workers were relatively higher. The results show that the trace element concentrations of the hair are possibly related to the trace element concentrations in the body.     

Collaborative monitoring study of airborne particulate matters among seven Asian countries

Summary Seven Asian countries have been collaborating in collecting airborne particulate matter (APM) in their individual countries and analyzing them by neutron activation analysis as a common analytical tool. APM samples were collected into two fractions of fine and coarse grains (PM2 and PM2-10, respectively). Analytical data were compared from several viewpoints such as particulate sizes, locality of sampling sites (either urban or rural) and geographical location of participating countries. Chemical composition and their monthly variations as well as mass concentrations appear to be highly characteristic for individual sampling sites, suggesting that NAA data are suitable for evaluating the air quality in each site.     

Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.     

ICP—AES法测定硼酸铝钇钕（NYAB）激光晶体中的Nd

应用ICP-AES法分析自倍频激光晶体(NYAB)样品中的Nd,在石墨坩埚中于500℃用NaOH熔融分解样品,方法的回收率为96%～105%,测定的相对标准偏差为1.42%,方法简便,可给出满意的分析结果。     

Rational materials design of sorbent coatings for explosives: applications with chemical sensors

A series of chemoselective polymers had been designed and synthesized to enhance the sorption properties of polymer coated chemical sensors for polynitroaromatic analytes. To evaluate the effectiveness of the chemoselective coatings, a polynitroaromatic vapor test bed was utilized to challenge polymer coated surface acoustic wave (SAW) devices with different explosive vapors. Dinitrotoluene detection limits were determined to be in the <100 parts per trillion ranges. ATR-FTIR studies were used to determine the nature of the polymer-polynitroaromatic analyte interactions, and confirm the presence of hydrogen-bonding between polymer pendant groups and the nitro functional groups of polynitroaromatic explosive materials.     

Large-volume stacking in capillary electrophoresis using pH hysteresis of the electroosmotic flow in a bare fused-silica capillary

For large-volume stacking with the electroosmotic flow pump (LVSEP) in capillary electrophoresis of anionic analytes it is required that the electroosmotic mobility (EOM) should be smaller than the magnitudes of the effective mobilities of the analytes. When a fused-silica capillary is treated with an acidic solution, the silanoate group on the silica surface is neutralized to silanol and the EOM is suppressed. Due to the slow deprotonation equilibrium of the silanol group at an intermediate pH, this reduced EOM can be retained during a number of electrophoresis runs. Using a bare fused-silica capillary preconditioned with 0.01 M HCl, successful LVSEP at pH 6.0 was achieved for weakly acidic compounds with two orders of magnitude enhancements in the concentration sensitivity. The repeatability in migration times of ten analytes stacked by LVSEP in a single day was excellent with the relative standard deviation (RSD) less than 1% (n = 6). The day-to-day repeatability was also excellent with RSD less than 3% (n = 3 x 6) when the capillary was preconditioned each day.