线极化径向线缝隙天线的设计

提出了线极化径向线缝隙天线（LP-RLSA）的设计方案．该天线是用于接收卫星直播电视（DBS）、甚小口径地球站（VSAT）、各种卫星地面移动体（包括车辆、船舶等）的高增益平板天线．在讨论了线极化径向线缝隙天线原理的基础上，完成了其计算机辅助设计和绘图．使用该方法给天线设计带来了方便，能灵活调整和优化缝隙排列，具有直观和精度高的优点．     

内参量热力学中的应变参量分析

以连续体的各力学守恒定律和熵函数为基础,给出了完备的变形体内参量热力学的表述框架。讨论了将热力学状态参量分划为外参量和内参量的必要性和依据,论证了热力学内参量和非弹性变形的关系以及将各种类型的非弹性应变列为内参量的数学条件。给出了考虑非弹性变形的内参量热力学基本方程,讨论了熵平衡和熵产生的关系方程和行为特性。引入两种定义的变形体自由能函数的表述方程,给出了各相应的状态方程组。     

电沉积－退火工艺制备铜铟硒太阳能电池薄膜及表征

利用电沉积硒气氛下后续退火的工艺制备出了高结晶质量的铜铟硒薄膜．通过X射线衍射、扫描电子显微镜、拉曼光谱、紫外-可见-近红外光谱和阻抗谱技术对退火后的铜铟硒薄膜进行表征,结果表明530 oC硒化退火后的铜铟硒薄膜具有四方的黄铜矿晶体结构,晶粒尺寸达到微米量级,光学带隙为0.98 eV,经过KCN溶液去除表面高导电性的铜硒化合物后铜铟硒薄膜的载流子浓度在10¹⁶ cm^-3量级．利用硒化退火的铜铟硒薄膜作为光吸收层制备了结构为AZO/i-ZnO/CdS/CIS/Mo/glass的太阳能电池,在AM1.5光照条件下对其电流-电压特性测试后发现面积为0.2 cm²的电池可以达到0.96％的能量转换效率,并对限制电池效率的原因做出了初步的分析和讨论.     

Single-transverse-mode output from a fiber laser based on multimode interference

An alternative original approach to achieve single-transverse-mode laser emissions from multimode (MM) active fibers is demonstrated. The fiber cavity is constructed by simply splicing a conventional passive single-mode fiber (SMF-28) onto a few centimeters-long active MM fiber section whose length is precisely controlled. Owing to the self-imaging property of multimode interference (MMI) in the MM fiber, diffraction-limited laser output is obtained from the end of the SMF-28, and the MMI fiber laser is nearly as efficient as the corresponding MM fiber laser. Moreover, because of the spectral filtering effect during in-phase MMI, the bandwidth of the MMI fiber laser is below 0.5 nm.     

Micro-Gal laser absolute gravimeter based on high precision heterodyne interferometer

A micro-Gal absolute gravimeter based on high-precision and high-stability heterodyne interferometer is presented. The distance measuring technology of the gravimeter is studied in detail. The experimental results of distance measuring for a free-falling motion show that the high-precision heterodyne interferometer described in this paper can meet the demand of a micro-Gal absolute gravimeter with relative uncertainty of 6.4 × 10-9. Moreover, the heterodyne interferometer is more stable than the Mach-Zehnder interferometer (MZI) which is widely used in present absolute gravimeters.     

Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg-Zn-Ca alloy

The poor corrosion resistance of magnesium alloys is a dominant problem that limits their clinical application. In order to solve this challenge, micro-arc oxidation (MAO) was used to fabricate a porous coating on magnesium alloys and then electrochemical deposition (ED) was done to fabricate rod-like nano-hydroxyapatite (RNHA) on MAO coating. The cross-section morphology of the composite coatings and its corresponding energy dispersion spectroscopy (EDS) surficial scanning map of calcium revealed that HA rods were successfully deposited into the pores. The three dimensional morphology and scanning electron microscopy (SEM) image of the composite coatings showed that the distribution of the HA rods was dense and uniform. Atomic force microscope (AFM) observation of the composite coatings showed that the diameters of HA rods varied from 95 nm to 116 nm and the root mean square roughness (RMS) of the composite coatings was about 42 nm, which were favorable for cellular survival. The bonding strength between the HA film and MAO coating increased to 12.3 MPa, almost two times higher than that of the direct electrochemical deposition coating (6.3 MPa). Compared with that of the substrate, the corrosion potential of Mg-Zn-Ca alloy with composite coatings increased by 161 mV and its corrosion current density decreased from 3.36 × 10⁻⁴ A/cm² to 2.40 × 10⁻⁷ A/cm² which was due to the enhancement of bonding strength and the deposition of RNHA in the MAO pores. Immersion tests were carried out at 36.5 ± 0.5 °C in simulated body fluid (SBF). It was found that RNHA can induce the rapid precipitation of calcium orthophosphates in comparison with conventional HA coatings. Thus magnesium alloy coated with the composite coatings is a promising candidate as biodegradable bone implants.     

液体表面张力系数测定实验的几点分析

用拉脱法测定水的表面张力系数实验中，用焦利氏秤测定（Ｆ—Ｗ）时，确定焦利氏秤标尺读数Ｌ１、Ｌ２的位置有两种方法。本文旨在详细分析这两种方法隐含的实验条件和对实验结果的影响．并进行比较，得出结论。     

新型风成像干涉仪温度补偿理论研究

简述了高层大气风场被动式遥感探测的基本原理;论述了新型风成像干涉仪宽场、消色差、温度补偿理论,针对目前国际上采用的风成像干涉仪补偿方法的不足,从理论上进行了分析与讨论,给出了四层介质的优化补偿理论和方案.模拟结果表明,该补偿可完全理想地消去单色光的温差,且复色光的温差补偿要比现有的方法提高1—2个量级.该研究为设计宽场、消色差、温度补偿的新型风成像干涉仪和提高风场探测精度提供了重要的理论依据和实践指导.     

V2CN2负载过渡金属双原子电催化固氮的第一性原理研究

电催化剂固氮能够在温和条件下催化氮气还原制氨.本工作基于第一性原理计算,系统地探究了分散在二维V₂CN₂上过渡金属二聚体(Fe, Mo, Ru)形成的双原子催化剂用于电催化固氮的可行性.双原子的协同作用使氮气得到较好的活化.吉布斯自由能计算表明,在V₂CN₂负载双铁原子(Fe₂@V₂CN₂)体系进行的催化反应过电位最低,仅为0.25 eV.进一步的分子动力学计算表明Fe₂@V₂CN₂具有较好的结构稳定性,并且该体系能很好的抑制HER反应的发生.通过与Mo₂@V₂CN₂,Ru₂@V₂CN₂体系的比较可知,氮气分子的吸附构型以及HER反应的竞争对催化剂的选择影响很大.我们的计算能够为双原子催化剂的设计提供更多的依据.     

Faraday-Michelson system for quantum cryptography

Quantum key distribution provides unconditional security for communication. Unfortunately, current experimental schemes are not suitable for long-distance fiber transmission because of phase drift or Rayleigh backscattering. In this Letter we present a unidirectional intrinsically stable scheme that is based on Michelson-Faraday interferometers, in which ordinary mirrors are replaced with 90 degree Faraday mirrors. With the scheme, a demonstration setup was built and excellent stability of interference fringe visibility was achieved over a fiber length of 175 km. Through a 125 km long commercial communication fiber cable between Beijing and Tianjin, the key exchange was performed with a quantum bit-error rate of less than 6%, which is to our knowledge the longest reported quantum key distribution experiment under field conditions.