Electron spin lifetimes in Hg0.78Cd0.22 Te and InSb

We have made direct pump–probe measurements of spin lifetimes in long wavelength narrow-gap semiconductors at wavelengths between 4 and 10 μm and from 4 to 300 K. In particular, we measure remarkably long spin lifetimes, τ_s300 ps, even at 300 K for epilayers of degenerate n-type InSb. In this material the mobility is approximately constant between 77 and 300 K, and we find that τ_s is approximately constant in this temperature range. In order to determine the dominant spin relaxation mechanism we have investigated the temperature dependence of τ_s in non-degenerate lightly n-type Hg_0.78Cd_0.22Te of approximately the same band gap as InSb, and find that τ_s varies from 356 ps at 150 K to 24 ps at 300 K. Our results, both in magnitude and temperature dependence of τ_s, imply that the Elliott–Yafet model dominates in these materials.     

Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

The glow curve structure for the LiF:Mg,Cu,Na,Si TL detector with dopants concentrations and sintering temperatures

The glow curve structures for LiF:Mg,Cu,Na,Si TL detectors with various dopant concentrations and sintering temperatures were investigated for the improvement of the glow curve structure and sensitivity of the TL detector. The dopant concentrations were varied over the following ranges: Mg (0–0.25 mol%), Cu (0–0.07 mol%), Na and Si (0–1.5 mol%). With increasing Cu concentration, the intensity of the main peak was intensified and reached a maximum at a concentration of 0.05 mol%. The high-temperature peak was reduced. The dependency of the main peak intensity on the Mg concentration exhibits a sharp maximum at 0.2 mol%. The intensity of the high-temperature peak tends to rise slightly with increasing Mg concentration. It was found that the optimum concentrations of the dopants in the LiF:Mg,Cu,Na,Si TL material are Mg: 0.2 mol%, Cu: 0.05 mol%, Na and Si: 0.9 mol%. The dependency of the main peak intensity on sintering temperature exhibits a very sharp maximum at 830°C. The high-temperature peak was rapidly reduced after 825°C.     

Kinetic interpretation of the structural-time criterion for fracture

The incubation-period-based criterion for fracture is considered in terms of the Zhurkov kinetic model of fracture. Within the kinetic model, fracture is treated as a continuously developing process, which starts immediately after the application of a tensile load to a sample and consists in breaking of the interatomic bonds and gradual accumulation of broken bonds in the material in the course of a fracture test. For certain materials, the inclusion of the thermal-fluctuation mechanism for fracture in the incubation-period-based criterion significantly affects the position of the static branch of the time dependence of strength. Time dependences of strength are calculated for a number of materials. The experimental data are analyzed using the structural-time criterion for fracture, which allows one to obtain a unified time dependence of strength for quasi-static and high-rate short-term loadings. The temperature dependence of the incubation period (latent time) is calculated analytically, and a relation is found between the latent fracture time and the thermal vibration frequency of atoms.     

Use of ultrafine-dispersed nanodiamond for selective deposition of boron-doped diamond films

A suspension of ultrafine-dispersed nanodiamond was used for introducing (in particular, selectively) high-density centers of diamond nucleation on various substrates. High-quality doped diamond films to be used as electrochemistry electrodes were deposited from the gas phase in a microwave discharge on certain substrates treated using ultrafine-dispersed nanodiamond. A uniform distribution of nucleation centers with concentrations greater than 10¹⁰ cm^-2 on silicon substrates was obtained. Electrochemical current-potential curves were measured for continuous films. Diamond meshes of different transparency were grown using selective nucleation. Successful production of high-quality doped diamond meshes gives grounds to consider them the most promising electrodes for use in electrochemistry.     

Chain decay of low-angle tilt boundaries in nanocrystalline materials

In terms of two-dimensional dislocation-disclination dynamics, a theoretical model is developed to describe the decay of a low-angle tilt boundary in a deformed nanocrystalline material under the action of an externally applied elastic stress and of the elastic field of a neighboring decayed boundary. The critical external stresses are calculated at which the boundary decays and the dislocations making up this boundary either are trapped by the boundary that decayed earlier or break away from both boundaries. The decay of a low-angle tilt boundary is shown to result in a substantial decrease in the critical decay stresses for the neighboring boundaries, which can cause an avalanche-like chain decay of low-angle boundaries yielding high-density ensembles of mobile dislocations capable of carrying substantial plastic deformations and of forming shear bands in deformed nanocrystalline materials.     

Numerical simulation of the translational nonequilibrium zone behind a shock-wave front

The translational nonequilibrium zone in a shock wave is considered for a gas consisting of light particles and a small addition of heavy particles. The gas is taken to be two-dimensional, and long-range forces are assumed to be absent. In the framework of this approximation, a program for molecular dynamics simulation of the gas is developed. It is applied to calculate a particle distribution function in the shock wave, to analyze the time evolution of the distribution function, and to study its dependence on the gas composition.     

Effect of γ radiation from <Superscript>60</Superscript>Co on the formation of metal contacts to GaAs (Al<Subscript>x</Subscript>Ga<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>As) structures

The properties of nonrectifying AuGe/GaAs (Al_0.4Ga_0.6As) contacts exposed to heat treatment, ⁶⁰Co γ radiation, and γ radiation combined with the application of an electrical bias are studied. A correlation between the type of interfacial interaction in the contacts and their resistance is found. Results obtained are explained in terms of a diffusion model with a movable boundary of the metal layer.     

Structure and properties of TiC-TiNi composites alloyed with iron

The structure, composition, and mechanical properties of iron-alloyed TiC-TiNi composite materials are studied. When the titanium carbide framework is sintered with iron and then impregnated with titanium nickelide, iron atoms are found to diffuse into the matrix and form the B2 structure that is inhomogeneous (gradient) in chemical composition and properties and exhibits various temperatures of martensitic transformation. The latter fact shows up in the broadening of the martensitic transformation hysteresis and its shift toward low temperatures with increasing iron content. At room temperature, the strength properties of gradient-matrix TiC-TiNi composites are shown to increase with iron concentration.