Entropy production as a regularization factor in solving an inverse diffusion problem

Inverse diffusion problems allow the diffusion coefficients to be determined from experimental concentration profiles. Solutions of the inverse diffusion problem are unstable toward perturbations of the initial concentration profiles. By the example of inverse diffusion problem solution for a model binary system it is demonstrated that the use of the production entropy to minimize the discrepancy functional stabilizes the solution even for significant perturbations of the initial concentration profile. The choice of the entropy production for the smoothing component of the discrepancy functional is physically adequate to the formulated problem, and the entropy production can be used to solve inverse problems of heat and mass transfer. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 79–83, June, 2006.     

Capillary electrophoretic study of synthesis of polyhexamethyleneguanidine

Synthesis of polyhexamethyleneguanidine hydrochloride was studied by capillary electrophoresis. A procedure for determining the reaction components was developed.     

Analysis of reflectance and modulation spectroscopic lineshapes in optoelectronic device structures

We discuss the spectral lineshapes of reflectance and modulated reflectance (MR) measurements on optoelectronic device structures such as epi-layers, quantum wells (QWs), vertical-cavity surface emitting-lasers (VCSELs) and resonant-cavity light-emitting diodes (RCLEDs). We consider the various methods for the extraction of built-in electric fields and band-gap energies from Franz-Keldysh oscillations (FKO), using the example of a tensilely strained InGaAs QW system, whose InGaAsP barriers yield strong FKO. We describe how critical point transition energies can be easily obtained by eye from Kramers-Kronig (KK) transforms of low field or QW modulation spectra, using the example of the modulated transmittance spectra of dilute-nitrogen InGaAsN p-i-n structures. We also discuss how the ordinary reflectivity spectrum, usually acquired at the same time as the MR signal, may also be exploited to extract layer thicknesses and compositions, and information about the active QW absorption spectrum in VCSEL and RCLED structures.     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Bronze roman mirrors: the secret of brightness

The surface microchemical structure of high tin leaded bronze Roman mirrors has been studied by means of scanning electron microscopy combined with energy dispersive spectrometry (SEM-EDS), X-ray diffraction (XRD) and optical microscopy (OM) techniques. The results allowed understanding of the origin of their high chemical stability and silvery-lustrous appearance. Indeed, some areas of the selected Roman mirrors are still characterised by a highly reflective and silver coloured surface even though they have been buried in the soil for about 2000 years. The micro-chemical results obtained from these areas have revealed that the mirror surface was tin enriched via inverse-segregation phenomenon by tailoring the cooling parameters. Furthermore, the presence of tin could be likely enhanced via cycles of oxidation and selective copper corrosion processes, thus resulting in a tin surface enrichment as a semi-transparent amorphous-like tin oxide (SnO₂) film, as well as a copper depletion at the outer surfaces.     

Magnetic and electrical transport properties of delta-doped amorphous Ge:Mn magnetic semiconductors

We report on the growth and characterization of delta-doped amorphous Ge:Mn diluted magnetic semiconductor thin films on GaAs (0 0 1) substrates. The fabricated samples exhibit different magnetic behaviors, depending on the Mn doping concentration. The Curie temperature was found to be dependent on both the Mn doping concentration and spacing between the doping layers. A sharp drop in magnetization and rise in resistivity are observed at low temperature in samples with high Mn doping concentrations, which is also accompanied by a negative thermal remanent magnetization (TRM) in the higher temperature range. The temperature at which the magnetization starts to drop and the negative TRM appears show a correlation with the Mn doping concentration. The experimental results are discussed based on the formation of ferromagnetic regions at high temperature and antiferromagnetic coupling between these regions at low temperature.     

Mossbauer investigations of corrosion environment influence on Fe valence states in oxide films of zirconium alloys

Mössbauer investigations about iron atom redistribution in oxide films of zirconium alloys subjected to corrosion at 500°C in pure oxygen and water pair have been analysed. The alloys were also subjected to autoclave conditions at a pressure of 10.0 MPa and autoclave conditions at 350°C and at a pressure of 16.8 MPa, using distilled water and water with additives of lithium and fluorine. It is shown that, depending on the corrosion environment, various compounds of iron, such as α-Fe₂O₃, Fe₃O₄, and FeO, as solid solutions of iron in ZrO₂ are formed in oxide films.     

Properties of<Emphasis Type="Italic">B</Emphasis><Subscript>c</Subscript> meson

The mass spectrum ofcb meson is investigated with an effective quark-antiquark potential of the form -α_c/r +Ar ^νwith ν varying from 0.5 to 2.0. TheS andP-wave masses, pseudoscalar decay constant, weak decay partial widths in spectator model and the lifetime ofB _cmeson are computed. The properties calculated here are found to be in good agreement with other theoretical and experimental values at potential index,ν = 1     

A graphical approach to computing Selmer groups of congruent number curves

Let E _n:y ²=x ³−n ² x denote the family of congruent number elliptic curves. Feng and Xiong (2004) equate the nontriviality of the Selmer groups associated with E _n to the presence of certain types of partitions of graphs associated with the prime factorization of n. In this paper, we extend the ideas of Feng and Xiong in order to compute the Selmer groups of E _n. 2000 Mathematics Subject Classification Primary—11G05; Secondary—14H52, 14H25, 05C90     

Selection Principles and Sierpinski Sets

We show that a set of real numbers is a Sierpinski set if, and only if, it satisfies a selection property similar to the familiar Menger property.